User guide Stereo Bluetooth™ Headset SBH20
Contents Introduction....................................................................................3 Accessory overview.......................................................................4 Basics.............................................................................................5 Charging the battery..........................................................................5 Turning on the headset......................................................................
Introduction With the Stereo Bluetooth™ Headset SBH20 you can control incoming and outgoing phone calls while you listen to music in stereo from your phone or from another device. Such a device must support Bluetooth™, for example, a computer or a portable music player. During a call, the music pauses automatically and starts playing again when the call ends. 3 This is an Internet version of this publication. © Print only for private use.
Accessory overview 1. Volume controls Adjust the volume. 2. NFC detection area Swipe this area during NFC transactions. 3. Clip Attach the accessory to your clothing. 4. Micro USB port Insert the charger cable to charge the battery. 5. Next key Play the next track. 6. Music key/Call key Play/Pause the current media file. Answer incoming calls. Press and hold down to reject incoming calls. 7. Previous key Play the previous track. 8. Power switch Move the switch to turn the power on or off. 9.
Basics Charging the battery Before using the Stereo Bluetooth™ Headset SBH20 for the first time, you need to charge the headset for approximately 2.5 hours. Sony chargers are recommended. To charge the battery 1 2 3 Plug the charger into a power outlet. Plug one end of the USB cable into the charger (or into the USB port of a computer). Plug the other end of the cable into the Micro USB port on your Stereo Bluetooth™ Headset SBH20 device.
To manually pair the headset with your phone 1 2 3 4 5 Make sure your phone has the Bluetooth™ function turned on. Turn on the headset. Headset: Press and hold until the notification light flashes blue. Phone: Scan for Bluetooth™ devices, then select Stereo Bluetooth™ Headset SBH20 in the available devices list. Follow the pairing instructions that appear on your phone. If a passcode is required, enter 0000.
Wearing instruction You can rotate the clip left or right for a more comfortable fit. To get the best performance from a Bluetooth™ headset when using it outdoors, it is recommended that you carry your phone on the same side of your body as the headset unit. 7 This is an Internet version of this publication. © Print only for private use.
Call handling • To answer a call with the headset When you hear an incoming call signal, press • To end a call During an ongoing call, press • To reject a call When you hear an incoming call signal, press and hold down • To mute the microphone during a call Press and hold down . . . . • To answer a second call When you hear an incoming call signal during an ongoing call, press ongoing call is put on hold.
Listening to music 1 2 To listen to music Open the media player in your phone. Press to play the music on the headset. To pause the music, press • To move between tracks When you listen to music, press • To move within a track Press and hold down or or . until you reach the desired position. 9 This is an Internet version of this publication. © Print only for private use. again.
Multipoint technology Use Multipoint technology to connect your headset to two Bluetooth™ devices at the same time. For example, if you connect your headset with two phones, you can receive calls from both phones without having to disconnect and reconnect. If you prefer that your headset connects to just one Bluetooth™ device at any given time, you can use Singlepoint mode instead. Before pairing your headset with a new device in Singlepoint mode, make sure that you disconnect it from other devices.
Troubleshooting I cannot answer a second call • • Make sure your phone supports the Bluetooth handsfree profile. Make sure the correct calling device is selected. Music does not play in the headset • • Make sure your phone or other device is paired with the headset. You may have to restart the media player and select to use the headset. Make sure the correct music source is selected. The headset turns off automatically • The battery level is too low.
Legal information Sony SBH20 Prior to use, please read the Important information leaflet separately provided. This User guide is published by Sony Mobile Communications AB or its local affiliated company, without any warranty. Improvements and changes to this User guide necessitated by typographical errors, inaccuracies of current information, or improvements to programs and/or equipment, may be made by Sony Mobile Communications AB at any time and without notice.
Declaration of Conformity for SBH20 We, Sony Mobile Communications AB of Nya Vattentornet SE-221 88 Lund, Sweden declare under our sole responsibility that our product Sony type RD-0010 and in combination with our accessories, to which this declaration relates is in conformity with the appropriate standards EN 300 328:V1.7.1, EN 301 489-7:V1.3.1, EN 301 489-17:V2.1.