User Manual

1. Headset jack
2. NFC™ detection area
3. Front camera lens
4. Ear speaker
5. Charging/Notification light
6. Proximity/Light sensor
7. Power key/Fingerprint sensor
8. Volume/Zoom key
9. Camera key
10. Main loudspeaker
11. Charger/USB cable port
12. Main microphone
13. Wi-Fi/Bluetooth antenna area
14. Main camera lens
15. Main camera light
16. Second microphone
17. GPS antenna area
18. Nano SIM/Memory card slot cover
19. Wi-Fi antenna area
Assembly
Your device only supports nano SIM cards. The nano SIM card and the memory card
have separate slots in the same holder. Make sure you don’t confuse the two.
To prevent data loss, be sure to turn off your device or unmount the memory card before you
drag out the holder to remove the nano SIM card or memory card from the device.
To Insert the Nano SIM Card and the Memory Card
1
Using your fingernail, drag out the SIM/Memory card holder.
2
Firmly place the SIM card in the correct horizontal orientation in position (1), as
shown in the illustration.
3
Firmly place the memory card in the correct horizontal orientation in position (2), as
shown in the illustration.
4
Gently push the holder into the slot until it fits into place.
To Remove the Nano SIM Card
1
With the screen facing down, open the nano SIM/Memory card slot cover.
2
Drag out the nano SIM/Memory card holder using your fingernail.
3
Remove the nano SIM card, and then gently push the holder into the slot until it
fits into place.
To Remove the Memory Card
7
This is an Internet version of this publication. © Print only for private use.