User Guide
Table Of Contents
- Contents
- Getting started
- Device security
- Learning the basics
- Battery and Maintenance
- Downloading applications
- Internet and networks
- Synchronizing data on your device
- Basic settings
- Typing text
- Calling
- Contacts
- Messaging and chat
- Music
- Camera
- Photos and videos in Album
- Connectivity
- Smart Apps and Features That Save You Time
- Clock and Calendar
- Accessibility
- Support and Legal
To find the MAC address for your device
1 Find and tap Settings > Network & Internet > Wi-Fi.
2 Tap Wi-Fi preferences > Advanced.
3 MAC address is displayed in the list.
The Wi-Fi Mac address is also displayed under Settings > System > About phone > Status >
Wi-Fi MAC address.
WPS
WPS (Wi-Fi Protected Setup) is a wireless networking standard that helps you
establish secure wireless network connections. WPS makes it easy for you to set up
WPA (Wi-Fi Protected Access) encryption to secure your network. You can also add
new devices to an existing network without entering long passwords.
Use one of these methods to enable WPS:
• Push button method – simply push a button on a WPS-supported device, for
example, a router.
• PIN method – your device creates a random PIN (Personal Identification Number),
which you enter on the WPS-supported device.
To connect to a Wi-Fi network using a WPS button
1 Find and tap Settings > Network & Internet > Wi-Fi.
2 Turn on Wi-Fi if it is not already on.
3 Tap Wi-Fi preferences > Advanced > WPS Push Button, then press the WPS
button on the WPS-supported device.
To connect to a Wi-Fi network using a WPS PIN
1 Find and tap Settings > Network & Internet > Wi-Fi.
2 Turn on Wi-Fi if it is not already on.
3 Tap Wi-Fi preferences > Advanced > WPS PIN Entry.
4 On the WPS-supported device, enter the PIN that appears on your device.
Sharing your cellular data connection
You can share your cellular data connection with other devices in several ways.
• USB tethering: Share your cellular data connection with a single computer using a
USB cable.
• Portable hotspot: Share your cellular data connection with up to 10 other devices
simultaneously, including devices that support WPS technology.
• One-touch portable hotspot: Touch devices to start sharing your cellular
connection over Wi-Fi.
• Bluetooth tethering: Share your cellular data connection with up to four other
devices via Bluetooth.
To share your data connection using a USB cable
1 Connect your device to a computer, using the USB cable that came with it.
2 Find and tap Settings > Network & Internet > Hotspot & tethering.
3 Tap the USB tethering slider, then tap OK if prompted.
is displayed in the
status bar once you are connected.
4 To stop sharing your data connection, tap the USB tethering slider or
disconnect the USB cable.
You cannot share your device's data connection and SD card over a USB cable at the same
time.
49
This is an internet version of this publication. © Print only for private use.