Instruction Manual

173
Settings
❖
Information
･
Depending on your usage environment, the
connection speed may be decreased, or Wi-Fi may
not be available.
･
When the terminal is connected to Wi-Fi network
successfully, "Connected" appears. If a different
message is displayed, make sure of the password
(security key).
When the connection is not established even if you
enter a correct password (security key), the correct IP
address may not have been acquired. Check the
signal status and reconnect. It may take 5 minutes or
more to display the connection result after the
operation of the connecting to Wi-Fi network.
･
If you connect to an access point that is not
connected to the Internet, etc. appears and
communication may be performed via mobile
network, not via Wi-Fi. To perform Wi-Fi
communication via such access point, tap the
notification indicating that Internet access is
unavailable appeared when connecting to the
access point, and then follow the onscreen
instructions.
･
To use docomo services via Wi-Fi, you need to set up
your d ACCOUNT (P.50).
Deleting connecting Wi-Fi network
setting
1
From the Home screen, [apps
folder]
u
[Settings]
u
[Network &
internet]
u
[Wi-Fi].
2
Tap the Wi-Fi network that is
connected.
3
[FORGET].
Adding a Wi-Fi network manually
･
Turn Wi-Fi on beforehand (P.172).
1
From the Home screen, [apps
folder]
u
[Settings]
u
[Network &
internet]
u
[Wi-Fi].
2
[Add network].
･
Tap and scan the QR code for Wi-Fi
password to connect to the Wi-Fi
network.
3
Enter the name (SSID) of Wi-Fi
network you want to add.
4
Tap "Security" setting item
u
Tap a
security type of the Wi-Fi network.
･
You can select from the following 7
types: "None", "Enhanced Open", "WEP",
" W PA/WPA 2 -Per s o nal", " W PA 3-Per s onal ",
" WPA/WPA2/ WPA3-Enterp r ise", " WPA3 -
Enterprise 192-bit".
5
If required, enter security
information for the Wi-Fi network.
6
[SAVE].
❖
Information
･
To add hidden Wi-Fi network whose stealth setting is
enabled, in Step 5, tap [Advanced options]
u
[No] of
"Hidden network"
u
[Yes].