Instruction Manual

176
Settings
❖
Information
･
Displayed mobile data usage amount is an estimate
and it may be different from the actual one. You can
check your actual mobile data usage volume in My
docomo.
･
Note that the mobile data communication will
suspend when the mobile data usage reaches to the
specified limit value.
To resume the mobile data communication, on the
suspension notification screen, tap [RESUME]. If the
suspension notification screen does not appear, drag
the status bar down
u
[Mobile data limit reached]
u
Tap [RESUME].
Setting an access point
An access point for connecting to the
Internet (sp-mode) is already registered. You
can add or change it if necessary.
For details of sp-mode, refer to NTT DOCOMO
website.
https://www.nttdocomo.co.jp/service/
spmode/ (in Japanese only)
■
Checking the access point in use
1
From the Home screen, [apps
folder]
u
[Settings]
u
[Network &
internet]
u
[Mobile network]
u
[Advanced]
u
[Access Point
Names].
･
The radio button on the right of current
access point is marked.
■
Setting an access point additionally
1
From the Home screen, [apps
folder]
u
[Settings]
u
[Network &
internet]
u
[Mobile network]
u
[Advanced]
u
[Access Point
Names].
2
.
･
To edit the access point, tap the access
point.
3
[Name]
u
Enter any name
u
[OK].
4
[APN]
u
Enter an access point name
u
[OK].
5
Tap and enter all other
information required by your
network operator.
6
u
[Save]
u
[OK].
Set data limit Set whether to temporarily
suspend the mobile data
communication when the
mobile data usage reaches to
the limit value.
Data limit Set the limit value of mobile
data usage.