Instruction Manual

204
Settings
* If the terminal goes into sleep mode during a call
with "Power button ends call" is ON, you can end the
call by pressing the power key to wake the terminal
and then pressing the power key again.
1
From the Home screen, [apps
folder]
u
[Settings]
u
[Accessibility]
u
[Text-to-speech output].
❖
Information
･
To reading out the text with this function, download
the corresponding Text-to-speech output
application.
Remove animations Set whether to turn off the
animation effect of screen
display.
Click after mouse
pointer stops
moving
Set whether to perform click
operation when the pointer
stops when using a mouse
(commercially available) etc.
Power button ends
call
*
Set whether to end calls by
pressing the power key.
Auto-rotate screen P. 5 8
Touch & hold delay Set response time for operation
of touching and holding the
screen.
Time to take action
(Accessibility
timeout)
Set the display time for the
notification message
accompanying the operation
menu when receiving
+Message etc.
･
This function may not be
operated depending on
application or function.
Vibration & haptic
strength
Set whether to vibrate the
terminal when you have an
incoming call or notification, or
tap the key icon.
･
The terminal may vibrate
even when this setting is off
depending on application or
function.
Mono audio Set whether to play sound with
monaural.
Audio balance Set the audio balance.
Caption
preferences
Set whether to display the
captions or set the language,
font size for captions.
High contrast text Set whether to show characters
clearly against the background
color.
Setting Text-to-speech output
Preferred
engine
Select and set the engine for Text-to-
speech output.
Language Set language for Text-to-speech
output.
Speech rate Set speed at reading out text.
Pitch Set the pitch of voice to read out text.
PLAY Playback reading sample.
RESET Reset setting of "Speech rate" and
"Pitch" to the default.