Instruction Manual

213
Data communication
Data communication
Bluetooth function is a technology which
enables to connect with Bluetooth device
such as PC, handsfree headset wirelessly.
･
The terminal does not connect wirelessly with
all types of Bluetooth devices.
･
Supported Bluetooth profiles (P.245)
❖
Information
･
On/OFF setting of the Bluetooth function is kept
even if you turn off the power.
･
When you do not use Bluetooth function, turn it off
to save the battery.
･
To switch ON/OFF of Bluetooth function, from the
Home screen, tap [apps folder]
u
[Settings]
u
[Device
connection]
u
[Connection preferences]
u
[Bluetooth]
u
/ .
■
Reception interference caused by
wireless LAN devices
The terminal's Bluetooth function and
wireless LAN devices use the same
frequency band (2.4GHz). If you use the
terminal near a wireless LAN device,
reception interference may occur or the
communications speed may lower. Also,
you may hear noise or have a connection
problem. In these cases, do the following:
･
Keep the Bluetooth device approximately
10 m or more away from a wireless LAN
device.
･
Within approximately 10 m, turn off either
the Bluetooth device or the wireless LAN
device.
1
From the Home screen, [apps
folder]
u
[Settings]
u
[Device
connection].
2
[Pair new device].
･
Tap [Device name] to change the name
of the terminal when displayed on the
other Bluetooth device.
To connect the terminal and Bluetooth
device, pair them first.
･
Once paired, the setting with the Bluetooth
device is saved.
･
For make pair setting, entering passcode (PIN)
may be required. Passcode (PIN) of the
terminal is "0000". If you cannot make pair
setting when you enter "0000", see the
documentation of your Bluetooth device.
Bluetooth function
Making the terminal detectable
Making pair setting for the
terminal and Bluetooth device