Instruction Manual

ManualsBrandsSony ManualsCell PhonesGSM/WCDMA/LTE Phone with BT, DTS/UNII a/b/g/n/ac, GPS and NFC

37

Before using the terminal

3

Set the docomo nano UIM card in

the tray with the IC face down.

･

Make sure that the corner cut of the

card is oriented properly.

･

Be sure to fit the docomo nano UIM

card into the tray so that it does not

shift.

4

Hold the terminal horizontally,

insert the tray with the card into

the terminal, and then push it

straight.

･

Check the orientation of the terminal

and the tray.

5

Push the tray into the end, firmly

press each point indicated with ,

and then make sure that there are

no gaps between the terminal and

the cover.

1

Draw the cover of docomo nano

UIM card/microSD card slot (P.30).

2

Pull out the tray straight from the

terminal (P.36).

Removing docomo nano UIM

card