Instruction Manual

45
Before using the terminal
Before charging with Wireless charger 04
(optional), refer to the manual supplied with
the product.
Products with marks conform to the
wireless charging standards developed by
Wireless Power Consortium (WPC).
Notes on wireless charging
When charging, meet the wireless charging
touch point of the terminal (P.35) to the
wireless charger correctly.
If you attach a cover (commercially available),
etc. to the terminal, remove it and then
charge the terminal.
Set the terminal not to vibrate while charging.
If the terminal is moved by vibration, charging
may not be complete or the terminal may fall.
If you hear noise from a TV or radio while
charging, keep away from the TV or radio.
When there is the other wireless charging
compatible device nearby, keep the wireless
charger away 30 cm or more from it. Failure to
do so may hinder correct detection of the
terminal and charging may fail.
While charging, the reception of calling, data
communication or TV may become
degraded.
Be careful not to put a foreign metal object
between the terminal and the wireless
charger. The foreign object may generate
heat.
Do not put an IC card etc. between the
terminal and the wireless charger. The IC card
may have a malfunction.
When using the camera while charging, the
images may have noises.
When using the terminal while charging, the
charging speed may become slow or
charging may stop to prevent the
temperature of the terminal from rising.
Charging with a wireless
charger