Instruction Manual Manual de Instrucciones Before using this product, carefully read all product documentation and retain it for future reference. Antes de utilizar este producto, lea detenidamente toda la documentación del producto y consérvela para consultarla en el futuro.
WARNING To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Caution Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. The use of optical instruments with this product will increase eye hazard.
Declaration of Conformity Trade Name : SONY Model No. : CECH-2501B Responsible Party : Sony Electronics Inc. Address : 16530 Via Esprillo San Diego, CA 92127 U.S.A. Telephone No. : 858-942-2230 This device complies with Part 15 of the FCC Rules and RSS-Gen of IC Rules.
WARNING Radio waves Radio waves may affect electronic equipment or medical devices (for example, pacemakers), which may cause malfunctions and possible injuries. If you use a pacemaker or other medical device, consult your physician or the manufacturer of your medical device before using the wireless networking feature (Bluetooth® and wireless LAN). Do not use the wireless networking feature in the following locations: – Areas where wireless network use is prohibited, such as in hospitals.
Table of contents Connecting to the Internet......................................................... 32 Using the Internet browser..............................................................32 Viewing the user’s guide.................................................................32 Creating a PlayStation®Network account........................................32 PS3™ system updates.............................................................. 33 Part names...............................................
Precautions Before using this product, carefully read all the precautions. Safety This product has been designed with the highest concern for safety. However, any electrical device, if used improperly, has the potential for causing fire, electrical shock or personal injury. To help ensure accident-free operation, follow these guidelines: Regularly inspect the AC power cord for damage.
– When using the controller, grip it firmly to make sure it cannot slip out of your hand. Do not allow bodily contact with the system or air from the system vents for an extended period of time while in use. Extended contact under these conditions may cause low-temperature burns. – If using a controller that is connected to the PS3™ system with a USB cable, make sure there is enough space for the cable so that the cable will not hit a person or object.
Precautions Do not touch the plug of the AC power cord with wet hands. Protect the AC power cord from being walked on or pinched particularly at plugs, expansion receptacles and the point where the cord exits from the system. Do not place heavy items on the cord. Do not place the AC power cord near heating equipment and do not expose the cord to heat.
Storage Follow the instructions below to help prevent the product exterior from deteriorating or becoming discolored. When discs will not be used for an extended period of time, store them in their cases. Stacking uncased discs or storing them at an angle can cause them to warp. Wipe with a soft, dry cloth. Do not expose discs to high temperatures, high humidity or direct sunlight. Do not place any rubber or vinyl materials on the product exterior for an extended period of time.
Online information about the PS3™ system This manual explains hardware features and provides basic information about how to set up and operate the PS3™ system, including warnings and precautions for the safe and proper use of the system. For up-to-date information regarding the PS3™ system, you can also access the following information available on the Internet. Online user’s guide h ttp://manuals.playstation.net/document/ This guide contains detailed information about using the PS3™ system software.
XMB™ (XrossMediaBar) menu The PS3™ system includes a user interface called XMB™ (XrossMediaBar).
Part names System front / rear DUALSHOCK®3 Wireless Controller Port indicators L2 button L1 button Disc slot USB connector R2 button R1 button Power button Eject button WLAN access indicator button Directional buttons button button button HDD access indicator USB connectors LAN connector Left stick/L3 button* HDMI OUT connector SELECT button Right stick/ R3 button* START button PS button * The L3 and R3 buttons function when the sticks are pressed.
Getting started Connection methods US Getting started Connect your system to a TV You can use any of the following methods to connect your system to a TV. Video output in SD (Standard Definition) resolution VIDEO HDMI OUT connector AV MULTI OUT connector AV MULTI OUT connector L-AUDIO-R AV Cable TV Video output in HD (High Definition) resolution - component video Any TV or component connected to the system must be functioning properly and free of defects.
Getting started Connect an Ethernet cable (sold separately) Use an Ethernet cable to connect the system to the Internet. LAN connector AC IN connector Hint You can use a wireless network connection to connect to the Internet without using an Ethernet cable. page 28).
Performing initial setup of the system software 5 Perform initial setup. US After turning on the system, perform initial setup. 2 Getting started 1 Turn on the TV, and then switch the video input of the TV to match the input connector used by the PS3™ system. Press the power button. The power indicator turns green and the picture is displayed on the TV screen.
Getting started Video output on the PS3™ system The PS3™ system can output two types of resolution: HD and SD. Refer to the instruction manual for the TV in use to check which video mode is supported. HD (High Definition) Video mode *1 Aspect ratio SD (Standard Definition) 1080p 1080i 720p 480p 480i *2 16:9 16:9 16:9 16:9 4:3 16:9 4:3 *1 This number indicates the number of scan lines. Note that "i" stands for "interlace" and "p" stands for "progressive".
Video output cable types Cable type Input connector on the TV HDMI Cable*² (sold separately) HDMI IN connector Component AV Cable (sold separately) Component VIDEO IN connector S VIDEO Cable (sold separately) S VIDEO IN connector AV Cable (supplied) VIDEO IN connector (composite) Supported video modes*¹ 1080p / 1080i / 720p / 480p COMPONENT VIDEO IN Y PB/CB PR/CR AUDIO IN L R US Getting started The resolution displayed on the TV varies depending on the input connectors on the TV and the
Getting started 3 Adjusting video output settings Depending on the type of cables and the connectors used, you may need to adjust the PS3™ system's video output settings to display video at HD resolutions ( page 16) on a TV. Confirm the screen, and then press the button. If you changed the connector in step 2, a screen for confirming the change will be displayed. 4 Confirm the settings, select [Yes], and then press the button.
6 Confirm the settings, select [Yes], and then press the button. 9 Adjust audio output settings. Continue on to adjust audio output settings. Adjust settings to match the TV or audio device in use. Select the type of TV, and then press the If you select [HDMI], you will have the option to choose [Automatic] or [Manual] on the next screen. In most cases, select [Automatic].
Getting started Connecting digital audio devices Examples when connecting an audio device You can connect audio devices that support digital audio playback, such as an AV receiver for home entertainment use. An HDMI cable or optical digital cable can be used to connect an audio device to the PS3™ system. HDMI cable Audio output on the PS3™ system Optical digital cable The supported channels may vary depending on the output connector to be used.
Turning the PS3™ system on and off Turning on the system 1 Turning off the system 1 Press the power button. The power indicator lights up in solid red. Power indicator: solid red Power indicator: solid green Power button Power button 2 Press the PS button on the controller. After the controller number is assigned, you can use the controller to operate the system. Notice When the power indicator is lit solid green or flashing green, be sure to abide by the notices below.
Using the wireless controller Step 2: Assign a controller number Preparing for use To use a wireless controller, you must first register or "pair" the controller with the PS3™ system and assign a number to the controller. Step 1: Pair the system and the controller. Each time you turn on the system, a number must be assigned to the controller. Press the PS button. All of the port indicators flash.
Using the controller wirelessly If you press and hold down the PS button for more than one second, you can check the battery charge level on the screen. Hints The USB cable can be connected or disconnected while the controller and the system are turned on. If the controller does not function, press the PS button, and then reassign the controller number.
Playing content Blu-ray Disc (BD)/DVD/CD 1 2 Insert the disc. Insert the disc with the label side facing up. The eject indicator turns solid blue when the disc is inserted. An icon is displayed in the XMB™ menu, and playback of the disc begins. If the disc does not automatically start, select the icon for the disc from the button. XMB™ menu, and then press the Notices Do not insert multiple discs or foreign objects into the disc slot, because this may cause the system to malfunction.
Playing content on USB devices Notices 1 Connect the USB device. Do not remove USB devices or turn off the system while data is being saved, loaded or deleted. Doing so may cause data loss or corruption. When using a USB flash drive with a write-protect switch, do not operate the switch when the device is connected to the system. Doing so may cause data loss or corruption. File formats that can be played or viewed An icon is displayed on the screen.
Playing games Starting a game Game compatibility PlayStation®3 format software PlayStation® format software PlayStation®2 format software When you insert the disc, the game starts automatically. Can be played on this system * Cannot be played on this system * Operation of all PlayStation® format software titles is not guaranteed. Visit www.us.playstation.com for the latest information on software that can be played on this system.
Controller settings (Settings) Reassign Controllers If a controller port or number is specified by the software, you can use this setting to assign the appropriate controller port or number.* Controller Vibration Function You can set the vibration function to on or off. It is set to [On] by default. 1 2 3 * You cannot assign controller port 2-D using this system. Select (Game) (Memory Card Utility (PS/PS2)), and then press the button.
Adjusting network settings Example of a network configuration (wired) Example of a network configuration (wireless) A wired network configuration requires items , and . Network gateway device such as a DSL modem*1*2 Router*3 A wireless network configuration requires items and .
Adjusting network settings (wired) 1 Select (Settings) (Network Settings) [Internet Connection Settings], and then press the button. 1 2 A confirmation message about the Ethernet cable is displayed. 3 Select [OK], and then press the 4 Select [Easy], and then press the button. button. Basic settings are adjusted automatically, and a list of the settings is displayed. If the list is not displayed, you must adjust custom settings.
Adjusting network settings 6 Adjust wireless LAN settings. Select the access point that you want to use. You can usually select [Scan] and choose an access point within range of your system. Scan System scans for a nearby access point. Select the access point that you want to use. Enter Manually Specify the access point by entering its SSID manually. Automatic* Use the automatic setting feature of the access point.
Adjusting custom settings Specify the MTU value used when transmitting data. You can usually select [Automatic]. Proxy Server Ethernet operation mode Specify the proxy server to be used. You can usually select [Do Not Use]. Specify the Ethernet data transfer rate and operation method. You can usually select [Auto-Detect]. UPnP IP Address Setting Specify the method for obtaining an IP address when connecting to the Internet. The method varies depending on the Internet service provider you use.
Connecting to the Internet If network settings are already completed, the PS3™ system will automatically connect to the Internet when the system is turned on. The connection will remain active as long as the system is on. Using the Internet browser 1 Select (Network) the button. (Internet Browser), and then press The Internet browser opens. A busy icon is displayed while the page is loading.
PS3™ system updates By updating the PS3™ system software, you can add features and/or security patches. Frequently update your system to use the latest version of the system software. w ww.us.playstation.com/ps3 This site provides the latest information about system software updates. You can perform an update in any of the ways described below. Network update You can update by downloading the update data from the Internet. The latest update is automatically downloaded.
Using the on-screen keyboard Text entry field Cursor Displays predictive options Hints For details about using the on-screen keyboard, refer to the online user’s guide (http://manuals.playstation.net/document/). You can also enter text using a USB keyboard or Bluetooth®-compatible keyboard (both sold separately). With the on-screen keyboard displayed, press any key on the connected keyboard to start entering text.
Parental control Changing the security settings You can set a parental control level for games or Blu-ray Discs or other content under (Settings) (Security Settings). A password is required to change parental control settings. You can set a password under (Security Settings) [Change Password]. The password is set to "0000" in the default settings. Parental control levels for games You can set the parental control level for games under (Security Settings) [Parental Control].
Replacing the hard disk You can replace the hard disk that is installed in the PS3™ system. Caution Remove the hard disk in a location out of the reach of small children to help prevent accidental swallowing of small parts such as screws. The inside of the system is hot directly after use. Allow time for the system to cool down before starting to remove the hard disk. Be careful not to injure yourself when removing or handling the screw cover or the hard disk.
Hints Notice Backing up data in a single operation You can back up data that is saved on the hard disk to a USB mass storage device in a single operation. Select (Settings) (System Settings) [Backup Utility], and then follow the on-screen instructions to perform this operation. You may not be able to back up some content, including some types of copyright-protected data. US Replacing the hard disk It is recommended that you regularly back up data on the hard disk.
Replacing the hard disk 3 Place the system upside down on a soft, dry cloth, and then open the screw cover. 5 Remove the hard disk. Pull the handle upwards, and then pull out the hard disk from the system. Use the notch located above the screw cover to slightly pull up the cover. Then rotate the cover as shown in the diagram. If the cover is hard to pull up, insert a tool such as a flathead screwdriver in the notch and gently pull the cover up.
3 Replacing the hard disk Remove the hard disk from the metal frame. For safety reasons, be sure to turn off and unplug the system before attempting to replace the hard disk. When replacing the hard disk, follow the procedure below to remove the metal frame. 1 4 Using a crosshead screwdriver, remove the screws (4 places). US Place the replacement hard disk on the metal frame for the PS3™ system’s hard disk, and then attach using the screws (4 places). Do not overtighten the screws.
Replacing the hard disk Reinstalling the system software If the system software does not start when the system is turned on (such as when the hard disk has been replaced), a screen such as the one shown below is displayed. In this case, you must reinstall the system software using downloaded update data. If you have a game disc or other disc that contains update data, you may be able to use that disc to reinstall the system software.
Restoring data in a single operation Hints You may not be able to use the backup utility to restore some data. For details on the backup utility feature, refer to the online user’s guide (http://manuals.playstation.net/document/). Restoring selected data US Replacing the hard disk You can restore data that you backed up in a single operation by selecting (Settings) (System Settings) [Backup Utility].
Transferring data to another PS3™ system / restoring the system Transferring data to another PS3™ system You can transfer data that is saved on the hard disk of one PS3™ system (the source system) to the hard disk of another PS3™ system (the destination system) by selecting (Settings) (System Settings) [Data Transfer Utility]. Notice When you perform this operation, all of the data that is stored on the PS3™ system that will receive the data (the destination system) will be deleted.
Before requesting service Go through this section if you experience difficulty in operating the PS3™ system. Should any problem persist, contact Consumer Services ( back cover) for assistance. The system does not turn on. Check that the AC power cord is securely inserted in the system and the electrical outlet. The picture is distorted. Check that the cable is securely inserted. Try disconnecting the cable from the PS3™ system or TV and then reconnecting it.
Before requesting service The BD may be disc-locked. Enter the password that was set when the disc was created. See also the notices under "Playable discs" ( page 49). Certain BDs cannot be played. To play commercially available BD video software, the encryption key for AACS (Advanced Access Control System) may need to be renewed. To renew the key, you must update the system software. The size of the video image and the TV screen do not match.
The message [The attempt to obtain an IP address timed out.] is displayed during the Internet connection test. If you disconnected the Ethernet cable that is used to connect to a device such as a PC, and then reconnected it to the system, you must restart both your system and the modem. After restarting both devices, update your network settings by selecting (Settings) (Network Settings) [Internet Connection Settings] [Easy].
Before requesting service Try selecting (Settings) (Accessory Settings) [Controller Vibration Function], and then setting [Vibration Function] to [On]. Wireless controller The wireless controller does not function. When using the wireless controller, you must pair it with the system and assign a controller number. With the system turned on (power indicator is lit solid green), connect the system and the controller using the USB cable, and then press the PS button on the controller.
Other issues Depending on how a disc is being used, such as when copying an audio CD to the hard disk or starting software from a disc, disc noise may be louder than normal. Furthermore, some software may cause more disc noise than others. The power indicator is flashing red and green alternately. The interior of the system may have become too warm. This is typically due to the operating environment. Check whether the system is being used in a warm location.
Specifications Design and specifications are subject to change without notice. Information about system functionality and images published in this document may vary from those for your PS3™ system, depending on the system software version in use. PlayStation®3 system CPU RSX™ LPCM 7.1ch, Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS, DTS-HD, AAC Audio output 256 MB XDR Main RAM, 256 MB GDDR3 VRAM Memory Hard disk 2.5" Serial ATA 320 GB*1*2 Inputs/ outputs*3 Hi-Speed USB (USB 2.
Supplied AV cable and USB cable AV cable SONY Part No.: 1-838-149-11 Company: SONY Part No.: 1-833-625-12 BRAVIA™ Sync Playable discs For additional information on compatible media types, visit our website at www.us.playstation.com.
Specifications Region codes When using an 8 cm disc, insert the disc in the system without an adaptor. Depending on the disc, a region code that is based on the geographic region where the disc is distributed may be assigned. This system can play discs marked with the following region codes. The audio CD playback feature of this system is designed to conform to the Compact Disc (CD) standard.
Wireless controller battery If you come into contact with material from a leaking battery, take the following actions: – If the material gets into the eyes, do not rub. Immediately flush the eyes with clean water and seek medical attention. – If the material comes into contact with the skin or clothes, immediately rinse the affected area with clean water. Consult your physician if inflammation or soreness develops.
Specifications 3 Remove the casing. Push in the direction of the arrow. Pull the casing apart. 4 After disconnecting the connector, remove the battery. Connector Battery Recycling Lithium-Ion Batteries Lithium-Ion batteries are recyclable. You can help preserve our environment by returning your used rechargeable batteries to the collection and recycling location nearest you. For more information regarding recycling of rechargeable batteries, call toll free 1-800-822-8837, or visit http://www.rbrc.
LIMITED HARDWARE WARRANTY AND LIABILITY THIS WARRANTY IS PROVIDED TO YOU IN LIEU OF ALL OTHER EXPRESS OR IMPLIED WARRANTIES INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE FOR THE PS3™ HARDWARE, WHICH ARE DISCLAIMED HEREUNDER. HOWEVER, IF SUCH WARRANTIES ARE REQUIRED AS A MATTER OF LAW, THEN THEY ARE LIMITED IN DURATION TO THE WARRANTY PERIOD.
LIMITED HARDWARE WARRANTY AND LIABILITY Service policy You understand and acknowledge that any time SCEA services your PS3™ system (either within the Warranty Period or under a separate service arrangement), it may become necessary for SCEA to provide certain services to your PS3™ system to ensure it is functioning properly in accordance with SCEA guidelines.
Copyright and trademarks " ", "PlayStation", "SIXAXIS" and "DUALSHOCK" are registered trademarks of " and " " are trademarks of the Sony Computer Entertainment Inc. " same company. "XMB" and "xross media bar" are trademarks of Sony Corporation and Sony Computer Entertainment Inc. "SONY" and " " are registered trademarks of Sony Corporation. "Memory Stick", ", "ATRAC", "BRAVIA" logo, "BRAVIA" and the "x.v.
Copyright and trademarks DivX, DivX Certified, and associated logos are trademarks of DivX, Inc. and are used under license. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. U.S. and foreign patents licensed from Dolby Laboratories. DLNA and DLNA CERTIFIED are trademarks and/or service marks of Digital Living Network Alliance. Manufactured under license under U.S.
This product includes RSA BSAFE® Cryptographic software from RSA Security Inc. RSA, BSAFE are either registered trademarks or trademarks of RSA Security Inc. in the United States and/or other countries. RSA Security Inc. All rights reserved. Java and all Java based trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the U.S. and other countries. US @(#)fdlibm.h 1.5 95/01/18 Copyright © 1993 by Sun Microsystems, Inc.
Copyright and trademarks eZiText® and Zi® are registered trademarks of Zi Corporation. Portions of this software are copyright © 1996-2008 The FreeType Project (www.freetype.org). All rights reserved. This software is based in part on the work of the Independent JPEG Group. Visit http://www.scei.co.jp/ps3-license/index.html for other licensees and trademarks. All other trademarks are the property of their respective owners.
ADVERTENCIA Para evitar descargas eléctricas, no abra la unidad. Confie solamente sus reparaciones a personal cualificado. Precaución El empleo de controles, ajustes o procedimientos distintos de los aquí recogidos puede dar lugar a una exposición a radiaciones peligrosas. El uso de instrumentos ópticos con este producto aumenta el riesgo de daños oculares.
Declaración de Conformidad Nombre comercial: SONY Número de modelo: CECH-2501B Responsabilidad: Sony Electronics Inc. Domicilio: 16530 Via Esprillo San Diego, CA 92127 U.S.A. Número de teléfono: 858-942-2230 Este dispositivo cumple con Parte 15 de las Normas FCC y RSS-Gen de las Normas IC.
ADVERTENCIA Evite el uso prolongado del sistema PS3™. Tómese un descanso de 15 minutos durante cada hora de juego. Evite jugar si está cansado o tiene sueño. Ondas radiofónicas Las ondas radiofónicas podrían afectar a los equipos electrónicos o los equipos médicos (por ejemplo los marcapasos), y ocasionar fallos de funcionamiento o daños personales.
Índice Conexión a Internet................................................................... 90 Utilización del navegador de Internet..............................................90 Visualización de la guía del usuario...............................................90 Crear una cuenta PlayStation®Network..........................................90 Actualizaciones del sistema PS3™........................................... 91 Nombres de los componentes...................................................
Precauciones Lea detenidamente todas las precauciones antes de utilizar este producto. Seguridad Este producto ha sido diseñado prestando la máxima atención a las medidas de seguridad. Sin embargo, cualquier dispositivo eléctrico, si se utiliza de forma inadecuada, puede causar un incendio, descargas eléctricas o lesiones personales. Para tratar de evitar cualquier accidente durante el funcionamiento, siga estas indicaciones: Siga todas las advertencias, precauciones e instrucciones.
No coloque objetos ni se ponga de pie sobre el sistema, y no lo apile con otros dispositivos. No coloque el sistema ni los accesorios conectados en el suelo ni en lugares en los que pueda provocar que las personas tropiecen al pasar. Cuando conecte el sistema a un televisor de plasma o a un proyección*, no deje una imagen fija en la pantalla del televisor durante un largo período de tiempo, ya que ésta puede dejar una imagen débil de forma permanente en la pantalla.
Precauciones No enchufe el cable de alimentación AC del sistema a una toma de corriente eléctrica hasta que haya realizado todas las conexiones. Asegúrese de que el TV u otro dispositivo estén desconectados de la toma de corriente eléctrica antes de enchufar el sistema. Para garantizar un funcionamiento seguro, revise regularmente el cable de alimentación AC. En caso de que esté dañado, deje de utilizarlo inmediatamente y póngase en contacto con el servicio de atención al cliente contraportada).
Cuando utilice la función para escanear del sistema PS3™ a fin de seleccionar un punto de acceso a la red LAN inalámbrica, es posible que se muestren los puntos de acceso no destinados a uso público. Conecte el sistema únicamente a un punto de acceso que esté autorizado a utilizar. Si se traslada el sistema o el disco directamente de un lugar frío a uno cálido, puede condensarse humedad en la lente situada en el interior del sistema o en el disco.
Información online sobre el sistema PS3™ En este manual se explican las características del hardware y se proporciona información básica sobre la configuración y el funcionamiento del sistema PS3™, y se incluyen advertencias y precauciones para utilizarlo de manera segura y adecuada. Para obtener información actualizada en relación al sistema PS3™, también puede acceder a la siguiente información disponible en Internet. Manual del usuario online h ttp://manuals.playstation.
Menú XMB™ (XrossMediaBar) El sistema PS3™ incluye una interfaz de usuario llamada XMB™ (XrossMediaBar). Botón PS Categoría : Muestra el menú XMB™.. Enciende/apaga el sistema.. Salga del juego. Elemento Se utilizan para seleccionar categorías/elementos en pantalla. Panel de control Se muestra al seleccionar un icono y pulsar el botón Se muestra al pulsar el botón reproducción de contenido : Muestra las opciones del menú/panel de control. Botón : Cancela una operación.
Nombres de los componentes Parte frontal/posterior del sistema Mando inalámbrico DUALSHOCK®3 Indicadores de puerto Botón L2 Botón L1 Ranura para disco Botón de encendido Botón extraer Botones de dirección Indicador de acceso WLAN Conectores USB Conector HDMI OUT Botón R2 Botón R1 Botón Botón Botón Botón Indicador de acceso disco duro Conector LAN Conector USB Joystick izquierdo/ botón L3* Botón SELECT (selección) Joystick derecho/ botón R3* Botón START (inicio) Botón PS * Los botones L3 y R3 fun
Procedimientos iniciales Métodos de conexión ES Puede utilizar cualquiera de los siguientes métodos para conectar el sistema a un televisor. Salida de vídeo con resolución SD (definición estándar) VIDEO Conector HDMI OUT Conector AV MULTI OUT Conector AV MULTI OUT Cable AV L-AUDIO-R Televisor Salida de vídeo con resolución HD (alta definición) - vídeo componente Cualquier TV u otro dispositivo conectados al sistema deben funcionar correctamente y estar libres de defectos.
Procedimientos iniciales Conecte un cable Ethernet (se vende por separado) Utilice un cable Ethernet para conectar el sistema a Internet. Conector LAN Conector AC IN Nota Es posible utilizar una conexión de red inalámbrica para realizar la conexión a Internet sin utilizar un cable Ethernet. Si desea obtener más información, consulte "Configuración de los ajustes de red" ( página 86).
Configuración inicial del software del sistema 5 Realice la Configuración inicial. ES Después de encender el sistema, efectúe la configuración inicial. 2 Encienda el televisor y, a continuación, cambie la entrada de vídeo del televisor para ajustarla al conector de entrada que utiliza el sistema PS3™. Pulse el botón de encendido. El indicador de encendido se ilumina en verde y la imagen se muestra en la pantalla del televisor.
Procedimientos iniciales Salida de vídeo del sistema PS3™ El sistema PS3™ puede mostrar dos tipos de resoluciones: HD y SD. Consulte el manual de instrucciones del televisor que está utilizando para comprobar el modo de vídeo compatible. HD (Alta definición) Modo de vídeo *1 Formato SD (Definición estándar) 1080p 1080i 720p 480p 480i *2 16:9 16:9 16:9 16:9 4:3 16:9 4:3 *1 Este número indica el número de líneas de exploración.
Tipos de cable de salida de vídeo Tipo de cable Conector de entrada del televisor Cable HDMI*2 (se vende por separado) Conector HDMI IN Cable AV por Componentes (se vende por separado) Conector VIDEO IN de entrada de vídeo por componentes Cable S VIDEO (se vende por separado) Conector S VIDEO IN Cable AV (suministrado) Conector VIDEO IN (compuesto) Modos de vídeo compatible*¹ 1080p / 1080i / 720p / 480p COMPONENT VIDEO IN Y PB/CB PR/CR AUDIO IN L R 1080p / 1080i / 720p / 480p / 480i*3
Procedimientos iniciales Configuración de los ajustes de salida de vídeo En función del tipo de cables y conectores utilizados, es posible que sea necesario configurar los ajustes de salida de vídeo del sistema PS3™ para emitir vídeo en alta resolución ( página 74) en un televisor. 3 Confirme la pantalla y, a continuación, pulse el botón . Si ha cambiado el conector en el paso 2, aparecerá una pantalla para confirmar el cambio.
6 9 Confirme los ajustes, seleccione [Sí] y, a continuación, pulse el botón . Continúe para configurar los ajustes de salida de audio. Configure los ajustes para que se adapten al televisor o dispositivo de audio en uso. Seleccione el tipo de televisor y, a continuación, pulse el botón . Si selecciona [Estándar (NTSC)] o [480p] en el paso 5, aparecerá una pantalla para seleccionar el tamaño del televisor.
Procedimientos iniciales Conexión de los dispositivos de sonido digital Ejemplos de conexión de dispositivos de audio Es posible conectar dispositivos de audio que admitan la reproducción de audio digital, como un receptor de AV para fines de entretenimiento doméstico. Salida de audio del sistema PS3™ Puede utilizar un cable HDMI o un cable digital óptico para la conexión de dispositivos de audio al sistema PS3™.
Encendido y apagado del sistema PS3™ Encendido del sistema 1 Apagado del sistema 1 Pulse el botón de encendido. El indicador de encendido se ilumina en rojo intenso. Indicador de encendido: rojo intenso Indicador de encendido: verde intenso Botón de encendido Botón de encendido 2 Pulse el botón PS del mando. Aviso Una vez asignado el número de mando, puede usarlo para controlar el sistema.
Uso del mando inalámbrico Preparación para su utilización Para utilizar un mando inalámbrico, primero debe registrar o "emparejar" el mando con el sistema PS3™ y asignarle un número. Paso 1: empareje el sistema y el mando. Paso 2: asigne un número de mando Cada vez que encienda el sistema, deberá asignar un número al mando. Pulse el botón PS. Todos los indicadores de puerto parpadean. 1 Cuando se utiliza por primera vez. Cuando se utiliza con un sistema PS3™ diferente.
Utilización del mando de manera inalámbrica Si mantiene pulsado el botón PS durante más de un segundo, podrá comprobar el nivel de carga de la batería en la pantalla. Notas El cable USB se puede conectar o desconectar con el mando y el sistema encendidos. Si el mando no funciona, pulse el botón PS y, a continuación, vuelva a asignar el número del mando.
Reproducción del contenido Blu-ray Disc (BD)/DVD/CD 1 2 Inserte el disco. Introduzca el disco con la etiqueta orientada hacia arriba. El indicador de extracción cambia a azul intenso al insertarse un disco. Aparece un icono en el menú XMB™ y se inicia la reproducción del disco. Si el disco no se inicia automáticamente, seleccione el icono correspondiente al disco en el menú XMB™ y, a continuación, pulse el botón .
Reproducir contenido en dispositivos USB Avisos 1 Conecte el dispositivo USB. No extraiga dispositivos USB ni apague el sistema mientras se guardan, cargan o eliminan datos. Si lo hace, puede que los datos se pierdan o resulten dañados. Si utiliza un dispositivo de memoria USB con interruptor de protección contra escritura, no accione el interruptor cuando el dispositivo esté conectado al sistema. Si lo hace, puede que los datos se pierdan o resulten dañados. Aparece un icono en la pantalla.
Jugar Iniciar un juego Juegos compatibles Software de formato PlayStation®3 Software de formato PlayStation® Software de formato PlayStation®2 Al insertar el disco, el juego se inicia de forma automática. Compatible con este sistema.* Incompatible con este sistema. * No se garantiza el funcionamiento de todos los títulos de software de formato PlayStation®. Visite www.us.playstation.com para obtener la información más actualizada sobre el software compatible con este sistema.
Ajustes de mando (Ajustes) Vuelva a asignar los mandos Si el software especifica el puerto de mando o el número, es posible utilizar este ajuste para asignar el puerto de mando o el número apropiado.* Función de vibración del mando La función de vibración puede ajustarse en Sí/No. Está ajustada en [Sí] de forma predeterminada. Creación de Memory Card internas 1 * Utilizando este sistema el puerto de mando 2-D no puede ser asignado.
Configuración de los ajustes de red Ejemplo de la configuración de una red (con cable) La configuración de una red por cable requiere los elementos , y . Dispositivo de pasarela de red como, por ejemplo, un módem DSL.*1*2 Router*3 A la línea de Internet Ejemplo de la configuración de una red (inalámbrica) La configuración de una red inalámbrica requiere los elementos y . Dispositivo de pasarela de red como, por ejemplo, un módem DSL.
Configuración de los ajustes de red (con cable) 1 Conecte un cable Ethernet (se vende por separado) al sistema. 1 Seleccione (Ajustes) (Ajustes de red) [Ajustes de conexión a Internet] y, a continuación, pulse el botón . 2 Se muestra un mensaje de confirmación sobre el cable Ethernet. Asegúrese de que el cable Ethernet no se encuentra conectado al sistema. Seleccione (Ajustes) (Ajustes de red) [Ajustes de conexión a Internet] y, a continuación, pulse el botón .
Configuración de los ajustes de red 6 Ajuste la configuración de la LAN inalámbrica. Seleccione el punto de acceso que desee utilizar. Normalmente puede seleccionar [Escanear] y elegir un punto de acceso que se encuentre dentro de los límites de su sistema. Escanear El sistema busca un punto de acceso cercano. Seleccione el punto de acceso que desee utilizar. Introducir manualmente Introduzca el SSID del punto de acceso manualmente para especificarlo.
Ajuste de la configuración personalizada Modo de funcionamiento Ethernet Permite especificar la velocidad de transferencia de datos de Ethernet y el modo de funcionamiento. Por lo general, seleccione [Detección automática]. Ajuste de dirección IP Permite especificar el método de obtención de una dirección IP al conectarse a Internet. El método varía en función del proveedor de servicios de Internet. Automático Permite utilizar la dirección IP asignada por el servidor DHCP.
Conexión a Internet Si los ajustes de la red ya están completados, el sistema PS3™ se conectará automáticamente a Internet cuando se encienda el sistema. La conexión permanecerá activa siempre que el sistema esté encendido. Utilización del navegador de Internet 1 Visualización de la guía del usuario Puede utilizar el navegador de Internet para ver la guía online del usuario del sistema PS3™. Seleccione (Red) (Manuales de instrucciones online) y, a continuación, pulse el botón .
Actualizaciones del sistema PS3™ Mediante la actualización del software del sistema PS3™, puede añadir funciones o revisiones de seguridad. Actualice su sistema periódicamente para utilizar la versión más reciente del software del sistema. www.us.playstation.com/ps3 Este sitio proporciona la información más reciente acerca de las actualizaciones del software del sistema. Puede llevar a cabo una actualización de cualquiera de las formas descritas a continuación.
Utilización del teclado en pantalla Cursor Campo de introducción de texto Muestra las opciones intuitivas Notas Si desea obtener más información acerca del uso del teclado en pantalla, consulte la guía online del usuario (http://manuals.playstation.net/document/). También puede introducir texto mediante un teclado USB o un teclado compatible con Bluetooth® (ambos se venden por separado).
Control paterno Juego En la mayoría de embalajes de juegos aparece un símbolo que indica el grupo de edades para el que es adecuado. Los símbolos corresponden al nivel de control paterno de los juegos como se indica. Edad Cambio de los ajustes de seguridad Es posible ajustar el nivel de control paterno para juegos, discos (Ajustes) (Ajustes de Blu-ray u otros contenidos en seguridad). Para cambiar el ajuste de control paterno es necesario introducir una (Ajustes de contraseña.
Cambio del disco duro Puede cambiar el disco duro que se encuentra instalado en el sistema PS3™. Precaución Extraiga el disco duro en una ubicación fuera del alcance de niños pequeños para intentar evitar la ingesta accidental de piezas pequeñas como los tornillos. La parte inferior del sistema está caliente justo después de su uso. Deje que transcurra un tiempo para que el sistema se enfríe antes de iniciar la extracción del disco duro.
Copias de seguridad de los datos Aviso Es recomendable que realice regularmente copias de seguridad de los datos del disco duro. Si por cualquier motivo se produce una pérdida o daño del software o de los datos o el disco duro debe ser inicializado durante un servicio, puede no ser posible recuperarlos o repararlos. Sony Computer Entertainment Inc. y sus sucursales y filiales no se responsabilizan de los daños o lesiones relacionadas con la pérdida o la corrupción de los datos o del software.
Cambio del disco duro Extracción del disco duro Precaución Por motivos de seguridad, asegúrese de apagar y desenchufar el sistema antes de intentar extraer el disco duro. Es posible que el sistema no se encuentre en una posición estable cuando esté colocado boca abajo. Procure no lesionarse cuando extraiga el tornillo. 1 3 Coloque el sistema boca abajo sobre un paño suave y seco y, a continuación, abra la tapa del tornillo.
4 Extraiga el tornillo que fija el disco duro y, a continuación, retire la tapa de la bahía del disco duro. Retire el tornillo azul con un destornillador de estrella apropiado. Tapa de la bahía del disco duro 5 Extraiga el disco duro. El disco duro es una parte sensible del equipo, y debe manipularse con cuidado en todo momento.
Cambio del disco duro 1 Utilice un destornillador de estrella para extraer los tornillos (4 anclajes). 4 Coloque el disco duro de repuesto en el armazón metálico del disco duro del sistema PS3™ y luego fíjelo utilizando los tornillos (4 anclajes). No apriete los tornillos en exceso. 5 Instale el disco duro en el sistema. Consulte las instrucciones de la sección "Extracción del disco duro" página 96) y siga los pasos del procedimiento de instalación en orden ( inverso.
Reinstalación del software del sistema Si dispone de un disco de juego u otro disco que contenga datos de actualización, es posible que puede utilizar el disco para reinstalar el software del sistema. Si inserta el disco en el sistema PS3™ y sigue las instrucciones en pantalla, puede comprobar si es posible utilizar los datos de actualización. Para obtener detalles sobre la instalación del software del sistema, consulte la sección "Actualización del uso de una PC" en nuestro sitio Web: www.us.
Cambio del disco duro Restauración de datos de los que se ha realizado una copia de seguridad Puede restaurar los datos de los que se ha realizado copia de seguridad mediante uno de los siguientes métodos. Restaurar datos con una sola operación Puede restaurar datos de los que haya hecho una copia de seguridad con una sola operación, seleccione (Ajustes) (Ajustes del sistema) [Herramienta de copia de seguridad].
Transferencia de datos a otro sistema PS3™ / restauración del sistema Transferencia de datos a otro sistema PS3™ Aviso Al realizar esta operación, se eliminarán todos los datos guardados en el sistema PS3™ que reciba los datos (el sistema destinatario). Para detalles acerca de como usar la herramienta y sus limitaciones, consulte la guía del usuario online http://manuals.playstation.
Antes de solicitar asistencia técnica Consulte esta sección si tiene problemas a la hora de utilizar el sistema PS3™. Si algún problema no se soluciona póngase en contacto con el servicio de atención al cliente SCEA ( contraportada) para obtener ayuda. Alimentación El sistema no se enciende. Compruebe que el cable de alimentación AC está conectado firmemente en el sistema y en la toma de corriente eléctrica.
Algunos DVD presentan restricciones de control paterno predeterminadas. Introduzca la contraseña definida en (Ajustes de seguridad) para aumentar temporalmente el nivel de control paterno. Algunos BD presentan restricciones de control paterno predeterminadas. Introduzca la contraseña establecida en (Ajustes de seguridad) para cambiar el nivel de control paterno. Es posible que el BD esté bloqueado. Introduzca la contraseña establecida al crear el disco.
Antes de solicitar asistencia técnica Los archivos de música no se reproducen. Es posible que los métodos de reproducción estén limitados para algunos archivos de música que se distribuyen a través de Internet. En estos casos, es posible que el contenido no pueda reproducirse en el sistema PS3™. Red No se puede establecer la conexión a la red. Si está utilizando una conexión alámbrica, compruebe que el cable Ethernet esté correctamente conectado. Compruebe que la configuración de la red sea correcta.
Discos y dispositivos USB Si el disco tiene una etiqueta, insértelo con ésta orientada hacia arriba. Compruebe si el disco está rayado o sucio. Si está sucio, límpielo cuidadosamente con un paño suave. Consulte también los avisos del apartado "Discos que pueden reproducirse" ( página 109). El disco no puede extraerse. Pulse el botón extraer durante 10 segundos o más para expulsar el disco.
Antes de solicitar asistencia técnica Si no puede utilizar el mando incluso después de comprobar los elementos mencionados anteriormente, pulse el botón de reinicio situado en la parte posterior del mando con un objeto puntiagudo como, por ejemplo, un bolígrafo para intentar reiniciar el mando inalámbrico. Botón de reinicio La respuesta a la operación de los botones es lenta. La velocidad de respuesta puede ser lenta en una pantalla LCD o en la pantalla de un ordenador.
Ha olvidado su contraseña de ajustes de seguridad. Si restaura el sistema mediante (Ajustes) (Ajustes del sistema) [Restablecer ajustes predeterminados], la contraseña volverá a ser "0000". Sin embargo, tenga en cuenta que los ajustes distintos de los correspondientes a la contraseña también se restablecerán. Una vez restablecidos los ajustes, no podrán recuperarse. El sistema se calienta. El sistema puede calentarse al utilizarlo o permanecer encendido. No se trata de un fallo de funcionamiento.
Especificaciones El diseño y las especificaciones están sujetos a modificaciones sin previo aviso. La información sobre la funcionalidad del sistema y las imágenes publicadas en este documento pueden variar de lo que aparece en su sistema PS3™, en función de la versión del software del sistema que utilice. Sistema PlayStation®3 CPU GPU Salida de audio Memoria Disco duro Entradas/ salidas*3 2,5" Serial ATA USB de alta velocidad (USB 2.
Mando inalámbrico DUALSHOCK®3 Tipo de batería Discos que pueden reproducirse Batería integrada recargable de iones de litio Tensión 3,7 V de cc 610 mAh Peso BD-ROM con formato PlayStation®3 Aprox. 180 g (6,4 oz.
Especificaciones Códigos de región En función del disco, es posible que tenga asignado un código de región que está basado en la región geográfica en la que se distribuye el disco. Este sistema puede reproducir discos marcados con los siguientes códigos de región.
En raras ocasiones, es posible que los discos CD, DVD, BD y otros soportes no funcionen adecuadamente cuando se reproducen en el sistema PS3™. Esto se debe principalmente a las variaciones del proceso de fabricación o a la codificación del mismo. La batería de iones de litio del mando inalámbrico es reciclable. Cuando se deshaga del mando inalámbrico, extraiga la pila y siga las normativas locales relativas al desecho de las pilas.
Especificaciones 3 Extraiga la cubierta inferior. Presione en la dirección de la flecha. Retire la cubierta inferior. RECICLADO DE BATERÍAS DE IONES DE LITIO Las baterías de iones de litio son reciclables. Usted podrá ayudar a conservar el medio ambiente devolviendo las baterías usadas al punto de reciclaje mas cercano. Para más información sobre el reciclado de baterías, llame al número gratuito 1-800-822-8837, o visite http://www.rbrc.
GARANTÍA DEL HARDWARE Y RESPONSABILIDAD LIMITADAS ESTA GARANTÍA NO SE APLICARÁ SI ESTE PRODUCTO: (A) SE UTILIZA CON PRODUCTOS QUE NO SEAN COMPATIBLES CON ESTE PRODUCTO; (B) SE UTILIZA PARA FINES COMERCIALES (INCLUIDO EL ALQUILER); (C) O SE MODIFICA O MANIPULA; (D) RESULTA DAÑADO POR MOTIVOS DE FUERZA MAYOR, MAL USO, ABUSO, NEGLIGENCIA, ACCIDENTE, DESGASTE Y ROTURA, USO NO RAZONABLE U OTRAS CAUSAS NO RELACIONADAS CON MATERIALES O MANO DE OBRA DEFECTUOSOS; (E) TIENE EL NÚMERO DE SERIE ALTERADO, DEFORMADO O B
GARANTÍA DEL HARDWARE Y RESPONSABILIDAD LIMITADAS Esta garantía no se aplica a ningún software del sistema que esté preinstalado en el hardware PS3™, o que se suministre posteriormente mediante actualizaciones o nuevas versiones del software. La licencia de dicho software del sistema se le otorga de acuerdo con los términos y condiciones de un contrato de licencia para el usuario final que se encuentra en http://www.scei.co.jp/ps3-eula/, y dicho software se suministra con su propia garantía.
Derechos de autor y marcas comerciales " ", "PlayStation", "SIXAXIS" y "DUALSHOCK" son marcas comerciales "y" registradas de Sony Computer Entertainment Inc. Asimismo, " marcas comerciales de dicha compañía. " son "XMB" y "xross media bar" son marcas comerciales de Sony Corporation y de Sony Computer Entertainment Inc. "SONY" y " " son marcas comerciales registradas de Sony Corporation. "Memory ", "ATRAC", "BRAVIA" logo, "BRAVIA" y el nombre Stick", "Memory Stick Duo", " "x.v.
Derechos de autor y marcas comerciales DivX, DivX Certified y los logotipos correspondientes son marcas comerciales de DivX, Inc. usados bajo licencia. Manufactured under licence from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. U.S. and foreign patents licensed from Dolby Laboratories. DLNA and DLNA CERTIFIED are trademarks and/or service marks of Digital Living Network Alliance. Manufactured under license under U.S.
This product includes RSA BSAFE® Cryptographic software from RSA Security Inc. RSA, BSAFE are either registered trademarks or trademarks of RSA Security Inc. in the United States and/or other countries. RSA Security Inc. All rights reserved. Java and all Java based trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the U.S. and other countries. ES @(#)fdlibm.h 1.5 95/01/18 Copyright © 1993 by Sun Microsystems, Inc.
Derechos de autor y marcas comerciales eZiText® and Zi® are registered trademarks of Zi Corporation. Portions of this software are copyright © 1996-2008 The FreeType Project (www.freetype.org). All rights reserved. This software is based in part on the work of the Independent JPEG Group. Visite el sitio web http://www.scei.co.jp/ps3-license/index.html para obtener información acerca de otros titulares de licencia y marcas comerciales.
Online user's guide Manual del usuario online http://manuals.playstation.net/document/ http://manuals.playstation.net/document/ This guide contains detailed information about using the PS3™ system software. Este manual contiene información detallada acerca de el uso del software del sistema PS3™. System software updates www.us.playstation.com/ps3 This site provides the latest information about system software updates. PlayStation®3 official site www.us.playstation.