Instruction Manual
Table Of Contents
- Notes on using your camera
- Table of Contents
- Preparing the camera
- Before your operation
- Shooting images
- Using the shooting function
- Selecting the focus method
- Detecting faces
- Using the flash
- Adjusting the brightness of the image (Exposure, Flash compensation, Metering)
- Shooting with fixed brightness (AE Lock)
- Using brightness compensation for the entire image (Exposure compensation)
- Adjusting the amount of flash light (Flash Compensation)
- Selecting the flash control mode to set the amount of flash light (Flash control)
- Selecting the method for measuring the brightness of a subject (Metering Mode)
- Setting ISO
- Compensating for the brightness and contrast automatically (D-Range)
- Image processing
- Adjusting the color tones (White balance)
- Selecting the drive mode
- Using the viewing function
- Changing your setup
- Viewing images on a computer
- Printing images
- Others
- Index
151
Changing your setup
Note
• Correct metering cannot be achieved when you use lenses that do not provide a lens
contact, such as the lens of an astronomical telescope. In such cases, adjust the
exposure manually by checking it on the recorded image.
MENU button t 1 t [ Language] t Select the language
You can set the camera to start the demonstration playback of a movie if
you do not operate the camera for about one minute.
MENU button t 2 t [Demo Mode] t [On]
You can set the first screen of the menu to display in one of the following
two ways:
– Always displays the first screen of the menu.
– Displays the last item set. This will make it easier to quickly reset the
last item you set previously.
MENU button t 2 t [Menu start] t Select the desired
setting
Selecting the language
Setting the demonstration playback of a movie
Setting the first screen of the menu