Instruction Manual
Table Of Contents
- IMPORTANT SAFEGUARDS
- Read this first
- Notes on using your camera
- Table of Contents
- Preparing the camera
- Before your operation
- Shooting images
- Using the shooting function
- Selecting the focus method
- Zooming in in one step
- Using the flash
- Adjusting the brightness of the image (Exposure, Flash compensation, Metering)
- Shooting with fixed brightness (AE Lock)
- Using brightness compensation for the entire image (Exposure compensation)
- Adjusting the amount of flash light (Flash compensation)
- Selecting the flash control mode to set the amount of flash light (Flash control)
- Selecting the method for measuring the brightness of a subject (Metering mode)
- Setting ISO
- Adjusting the color tones (White balance)
- Image processing
- @/@ Selecting the drive mode
- Using the viewing function
- Changing your setup
- Viewing images on a computer
- Printing images
- Others
- Index
152
The power turns off suddenly.
• If you do not operate the camera for given period of time, the camera turns
to power saving mode and nearly shuts down. To cancel the power save,
operate the camera, such as pressing the shutter button halfway down
(page 121).
Nothing is displayed on the LCD monitor in viewfinder mode when the
power is turned on.
• In the default setting, the LCD monitor will turn off if no operation is
registered for more than five seconds to minimize the battery consumption.
You can change the time that the LCD monitor is turned off (page 121).
• The LCD monitor is set to off. Press the DISP button to turn the LCD
monitor on (page 39).
The image is not clear in the viewfinder.
• Adjust the diopter scale properly using the diopter-adjustment dial
(page 68).
No images in the viewfinder.
• The LIVE VIEW/OVF switch is set to “LIVE VIEW.” Set it to “OVF”
(page 67).
The image has not been recorded.
• A memory card is not inserted.
The shutter does not release.
• Check the free capacity of the memory card (page 29). If it is full, do one of
the following:
– Delete unnecessary images (page 110).
– Change the memory card.
• You cannot record images while charging the built-in flash (page 79).
• The shutter cannot be released when the subject is out of focus (page 72).
• The lens is not attached properly. Attach the lens properly (page 19).
• When an astronomical telescope, etc., is attached to the camera, set the
recording mode to M and do your shooting.
Shooting images