Instruction Manual

174
Settings
2
[Data warning & limit]
❖
Information
･
Displayed mobile data usage volume is an estimate.
It may be different from the actual one. You can
check your actual mobile data usage volume in My
docomo.
･
Note that the mobile data communication will
suspend when mobile data usage volume reaches to
the set limit volume.
To resume the mobile data communication, on the
suspension notification screen, tap [RESUME]. If the
suspension notification screen does not appear, drag
the status bar down
u
[Mobile data limit reached]
u
[RESUME].
Use tethering function which allows wireless
LAN devices, USB devices, or Bluetooth
devices to access the Internet via the terminal
as a modem.
❖
Information
･
If you want to use the tethering, use of Packet Pack/
packet flat-rate service is highly recommended.
･
Tethering function is not available when the docomo
nano UIM card is not inserted, mobile data
communication is disabled, or use of mobile network
is not available due to out of service area.
･
Up to 15 (portable hotspot (Wi-Fi tethering) : 10, USB
tethering : 1, Bluetooth tethering : 4) can be
connected at the same time.
Enabling Portable hotspot
You can use the terminal as a Wi-Fi access
point to connect up to 10 wireless LAN
devices to the Internet simultaneously.
1
From the Home screen, [apps
folder]
u
[Settings]
u
[Network &
internet]
u
[Hotspot & tethering].
2
[Portable hotspot]
u
.
App data usage
cycle
Set a usage cycle (measuring
period) for amount of mobile
data usage.
Set data warning Set whether to display the
notification when the mobile
data usage reaches to the set
warning volume.
Data warning Set a warning volume of mobile
data usage.
Set data limit Set whether to temporarily
suspend the mobile data
communication when the
mobile data usage reaches to
the limit volume.
Data limit Set a limit volume of mobile
data usage.
Using tethering function