INSTRUCTION MANUAL 18.
Introduction * The latest information can be downloaded. The URL and contents are subject to change without prior notice. Thank you for your purchase of "SO-XXX". For proper use of the SO-XXX, read this manual carefully before and while you use the SO-XXX. ❖Note Reproduction or reprint of all or part of this manual without prior permission is prohibited. ･ Important information for SO-XXX is posted in thefollowing website. Be sure to check before using. https://www.sonymobile.co.
❖Information ･ ･ ･ ･ ･ Display examples and illustrations used in this manual are just images for explanations and may be different from actual screens or products. In this manual, the easier procedure is described for the functions and settings which have multiple operating procedures. Please note that "SO-XXX" is called "the terminal" in this manual. In this manual, explanations for "Black"wallpaper are provided. In this manual, explanations for "docomo LIVE UX" as Home application are provided (P.79).
Contents ■ Supplied accessories. . . . . . . . . . . . . . . . . 1 ■ About using the terminal . . . . . . . . . . . . 4 ■ Safety Precautions (Always follow these directions) . . . . . . . . . . . . . . . . . . . . . . . . . . 6 ■ Handling precautions. . . . . . . . . . . . . . . 17 ■ Waterproofness/Dustproofness . . . . . 25 Before Using the Terminal . . . 31 Part names and functions................................................31 docomo nano UIM card....................................................
Apps . . . . . . . . . . . . . . . . . . . . . . 146 Data communication. . . . . . . .212 d メニュー (dmenu)............................................................ 146 dmarket.................................................................................... 146 Play Store................................................................................. 147 Osaifu-Keitai........................................................................... 148 TV......................................................
Contents/Precautions About using the terminal The terminal supports LTE, W-CDMA, GSM/ GPRS and Wireless LAN Systems. ･ Because a terminal operates using radio frequencies, it cannot be used inside a tunnel, underground, in a building or other locations where radio waves do not reach, in locations with weak radio wave condition, or out of LTE/ FOMA service area. The services may not be available on the upper floors of high-rise apartments or buildings, even if there are no obstructions around you.
The terminal automatically performs communication for synchronizing data, checking the latest software version, and maintaining a connection with the server, and for other purposes. If you transmit a large amount of data, such as when downloading applications or watching video, a packet communication charge becomes high. Subscription to Packet Pack/packet flat-rate service is highly recommended.
The terminal has an organic EL display. Although an afterimage may occur when the same image has been displayed for a long time, it is not a malfunction. To prevent the display from having afterimages, do not display the same image for a long time. Also, unevenness of colors or brightness, or changes of colors may be found depending on direction you are looking. That is because of the structure of organic EL display, not a malfunction.
*1 Serious injury: This refers to loss of sight, injury, burns (high- and low temperature), electric shock, broken bones, injuries with residual aftereffects from poisoning, etc., and injuries requiring hospital admission for treatment or long-term hospital attendance as an outpatient. *2 Minor injury: This refers to injuries, burns (high- and low-temperature), electric shock, etc. that do not require hospital admission for treatment or longterm hospital attendance as an outpatient.
Don’t Don’t Don’t No disassembly Do not charge the terminal when it is wet with liquids such as water (drinking water, sweat, seawater, urine of pet animals, etc.). Also, do not charge the terminal in a place where it possibly contacts water such as a bathroom. Doing so may cause fire, burns, injury, electric shock, etc. For waterproofness, see the following. ⇒ P.25 "Waterproofness/Dustproofness" Do not subject the terminal to strong pressure or break the terminal.
Don’t Do not attach the metal object (e.g. a sticker which contains metal in material) to a wireless charger or the terminal. Doing so may cause fire, burns, injury, etc. Do Don’t Do not put the metal object (e.g. a strap or clip which contains metal in material) to a wireless charger or the terminal. Doing so may cause fire, burns, injury, etc. Do Do Do When charging with a wireless charger, remove the cover etc. from the terminal if it is attached.
Don’t Don’t Do not place on an unstable or inclined platform. Be careful especially when vibrator is set. Doing so may cause the device to fall etc. and cause injury. Do not use or keep in a place that is very humid, dusty, or subject to high temperature. Doing so may cause fire, burns, electric shock, etc. For waterproofness/dustproofness, see the following. ⇒ P.
Don’t Don’t Don’t Do Do Do not watch a repeatedly-blinking screen for a long time. Doing so may cause cramp, loss of consciousness, etc. Do Do not allow water or other liquids (drinking water, sweat, seawater, urine of pet animal, etc.), or foreign substance such as a metal parts (blade of cutter, staple, etc.) or flammables to get in the docomo nano UIM card/microSD card slot of the terminal. Do not insert the docomo nano UIM card or a microSD card into wrong slot, or insert it in wrong orientation.
Do Do If the internal battery leaks or gives off a strange smell, immediately stop using the terminal and remove it from the vicinity of open flames. The leaking liquid may ignite fire, catch fire, explode etc. Don’t Be careful not to allow a pet etc. to bite the terminal. Doing so may cause fire, burns, injury, etc. because of damage of the internal battery.
3. Handling the adapter or wireless charger Don’t Do not connect the voltage converter for overseas travel (travel converter) to the AC adapter. Doing so may cause ignition, overheating, electric shock etc. Don’t Do not put an excessive force to the connection part with the adapter connected to the terminal. Doing so may cause fire, burns, injury, electric shock, etc. WARNING Don’t Do not use the adapter cord if it gets damaged. Doing so may cause fire, burns, electric shock, etc.
Do Do Do Do Do Do When replacing a fuse in a DC adapter, make sure to use the specified fuse. Using a fuse other than specified may cause fire, burns, electric shock, etc. For the specified fuse, check a manual that comes with a DC adapter. Wipe dust off from the power plug. Using it with dust adhered may cause fire, burns, electric shock, etc. When you connect the adapter or accessory socket to a power outlet, insert it firmly. Insecure inserting may cause fire, burns, electric shock, etc.
4. Handling the docomo nano UIM card Do CAUTION Do Be careful of the cut surface not to hurt your body parts such as fingers when handling docomo nano UIM card. The cut surface may be sharp and it may cause injury etc. 5. Handling the terminal near electronic medical equipment WARNING Do Do Do When you get close to other people within 15 cm just like not having enough space to turn around, set the radio wave of the terminal to OFF beforehand (Airplane mode, to Power off, etc.).
6.
Handling precautions ■ ･ - Rubbing roughly may scratch the display. - Drops of water or dirt left on the display may cause stains. - Do not use alcohol, thinner, benzine, cleaning detergent, etc. to clean the terminal. These chemicals may erase the printing on the terminal or cause discoloration. Common precautions ･ SO-XXX is waterproof/dustproof; however, do not allow liquids such as water (drinking water, sweat, seawater, urine of pet animals, etc.
･ Use the optional devices specified by NTT DOCOMO. ･ Using a non-specified device may cause malfunction or damage. Read the user's manual supplied with each optional device. ･ Do not drop the terminal or give a strong impact to the terminal. ･ Doing so may cause a malfunction or damage. ■ The terminal precautions ･ Do not press the display strongly, or not operate with a sharp-pointed objects. The display may get scratched and it may cause a malfunction or damage.
･ Keep off a magnetic card or a magnetic object from the terminal. ･ The magnetic data in cash cards, credit cards, telephone cards, floppy disks, etc. may be erased. Also, strong magnetic objects may cause a malfunction of the terminal. ･ - The battery is fully charged (immediately after the charging is complete) - The battery has run out (the terminal cannot power on) An appropriate battery level for storing is about 40%. Do not decorate the terminal with a film or stickers.
When you use a power outlet with a mechanism to prevent the plug from being removed, follow the instructions on the outlet's user's manual. ･ Do not subject the equipment to a strong impact. Do not deform the charging jack. ･ Doing so may cause malfunction. Do not use a wireless charger when it is covered by a blanket etc. ･ Do not use a device or AC adapter other than the specified one for a wireless charger.
･ Do not insert a docomo nano UIM card into the terminal if a label or seal is attached to the card. : The full band between 2400 MHz and 2483.5 MHz is used and the band of the mobile identification device can be avoided. Available channels vary depending on the country. For use in an aircraft, contact the airline beforehand. Doing so may cause malfunction.
■ Wireless LAN (WLAN) precautions Wireless LAN (WLAN) exchanges information using radio waves, and allows you to freely establish LAN connection if you are within an area where radio waves reach. However, without appropriate security settings, communications may be intercepted or hacked by malicious parties. It is recommended to configure necessary security settings on your own judgment and responsibility.
･ 5GHz device cautions The terminal can use 3 frequency bands of 5.2GHz band (W52), 5.3GHz band (W53), 5.6 GHz band (W56). - 5.2GHz band (W52/36, 40, 44, 48 ch) - 5.3GHz band (W53/52, 56, 60, 64 ch) - 5.6GHz band (W56/100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 ch) Using wireless LAN built-into the terminal in 5.2/ 5.3 GHz outside is prohibited by the Radio Law (except when communicating with a base station of data communication system for 5.
■ Note ･ Do not use a remodeled terminal. Using a remodeled terminal violates the Radio Law/Telecommunications Business Act. The terminal is compliant with rules on the technical standard conformance of specified wireless equipment based on the Radio Law/ Telecommunications Business Act, and as a proof of it, the "Technical Compliance Mark " is depicted on the electronic nameplate of the terminal.
Waterproofness/ Dustproofness SO-XXX provides waterproofness property of IPX5*1, IPX8*2, and dustproofness property of IP6X*3 with the cover of docomo nano UIM card/microSD card slot firmly attached. *1 IPX5 means that a communication device keeps functioning after applying a jet flow of 12.5 L/min. from every direction from a distance of approximately 3 m for at least 3 minutes using water nozzle in 6.3 mm inner diameter.
･ You can use the terminal in a bathroom. - Do not immerse the terminal into a bathtub. Also, do not use the terminal in hot water. Doing so may cause malfunction. If you should fall the terminal into the bathtub, immediately pick it up to drain water in specified procedure (P.29). - Never put the terminal in hot spring water or water containing soap, detergent or bath powder. In case the terminal gets wet with water other than tap water, wash it in the procedure above.
■ Opening the cover of docomo nano UIM card/microSD card slot Put your tip of finger (fingernail) into the groove and draw the cover out in the arrow direction. ■ Closing the cover of docomo nano UIM card/microSD card slot Push the tray all the way in the arrow direction and firmly press parts and make sure that there are no gaps between the terminal and the cover.
Do not perform actions shown in the illustrations below. Using Soap/Detergent/ Washing with brush/sponge Bath powder Soaking in ocean water Machinewashing Using in hot spring Do not move the terminal in water or slam the terminal against the surface of water. ･ If you put the terminal in tap water, be sure to have it within 30 minutes. ･ When you use the terminal in swimming pool, obey rules of the facility. ･ The terminal does not float on water. ･ Do not leave water on the terminal.
c DOCOMO does not guarantee actual operations under all states. Malfunctions deemed to be caused by inappropriate operation by the customer are not covered by the warranty. Draining water from the terminal When the terminal is wet, water may flow out after wiping it off; drain the water in the following steps. a Hold the terminal firmly and wipe off moisture on the terminal surface and back side with dry, clean cloth etc.
Do not wipe off water remaining in gaps directly with a cotton swab etc. ･ Dry the terminal naturally for about 3 hours at room temperature. ･ Notes on charging Check the following before and after charging. ･ Check if the terminal is not wet. Never charge the battery when the terminal is wet. ･ Accessories and optional devices are not waterproof/dustproof. ･ When charging the battery when or after the terminal is wet, adequately drain it and wipe off water with a dry, clean cloth etc.
Part names and functions a bc d j s kl m Top n p o q r f e t u v w Bottom g h i n Front a b Right Notification LED → P.55 Proximity/light sensor : Detects a face approach during a call to prevent misoperation, or used for automatic control of screen brightness. c Front camera lens d Earpiece/speaker e Touch screen → P.48 f Volume key/Zoom key : Use to adjust each sound volume, set silent mode, etc. g Fingerprint sensor h Power key/Screen lock key: Use to turn on/off the power or the screen.
v USB Type-C jack : Use when charging or connecting the supplied 3.5mm Earphone jack conversion/TV Antenna cable SO01, etc. It supports USB Power Delivery. w Speaker *1 You can check CE mark, FCC ID, IMEI information, etc. Please do not remove the sticker or nameplate. If you do so, repairs may be refused (P.239). *2 The antenna is built into the terminal. Covering around the antenna with your hand may affect the quality of communications. ❖Note Do not cover the sensor area with a sticker, etc.
Installing docomo nano UIM card 1 2 4 ･ Draw the cover of docomo nano UIM card/microSD card slot (P.27). Draw the tray straight to remove from the terminal. 5 3 Set the docomo UIM card in the tray with the IC up. Make sure that the corner cut of the card is oriented properly. ･ Be sure to fit the docomo nano UIM card into the tray so that it does not shift. ･ Hold the terminal horizontally and insert the tray with the card into the terminal and push it straight.
Removing docomo nano UIM card 1 2 3 4 Hold the terminal horizontally and insert the tray into the terminal and push it straight. ･ Draw the cover of docomo nano UIM card/microSD card slot (P.27). Draw the tray straight to remove from the terminal (P.33). Check the orientation of the terminal and the tray. Remove the docomo nano UIM card from the tray. 5 Firmly push the tray deeply and make sure that there are no gaps between the terminal and the cover (P.33).
microSD card You can save the data in the terminal to a microSD card or import data from the microSD card to the terminal. ･ The terminal supports microSD card of up to 2 GB, and microSDHC card of up to 32 GB, microSDXC card of up to 512 GB (As of October, 2018). ･ DOCOMO does not guarantee operations of any commercially available microSD card. For compatible microSD cards, contact each manufacturer of microSD card. ･ A microSDXC card can be used only on a SDXC-compatible device.
2 Draw the tray straight to remove from the terminal. 4 Hold the terminal horizontally and insert the tray with the card into the terminal and push it straight. ･ 3 Check the orientation of the terminal and the tray. Put a microSD card in the tray with the contacts side up. ･ Be sure to fit the docomo nano UIM card into the tray so that it does not shift. 5 Push the tray deeply and firmly press the parts indicated with and make sure that there are no gaps between the terminal and the cover.
Removing microSD card ･ 4 For opening/closing the cover of docomo nano UIM card/microSD card slot, see "To ensure waterproofness/dustproofness" (P.26). 1 Draw the cover of docomo nano UIM card/microSD card slot (P.27). 2 Draw the tray straight to remove from the terminal (P.36). 3 Remove the microSD card from the tray. Hold the terminal horizontally and insert the tray into the terminal and push it straight. ･ 5 Check the orientation of the terminal and the tray.
CE mark and FCC ID 1 Draw the cover of docomo nano UIM card/microSD card slot, and insert a fingernail into the hook at the edge of the label tray, then pull it out straight. Charging The internal battery is not fully charged at the time of purchase. ･ Estimated charging time (P.247) Available time on full charge (estimate) The available time differs depending on operating environment or the internal battery condition. ･ Estimated available time (P.
･ To check performance of the internal battery, from the Home screen, tap [apps folder]u [Settings]u[System]u[About phone]u [Battery life]. Before charging It is recommended to use the AC Adapter 07 (optional) for charging. For handling the AC Adapter 07, refer to the AC Adapter 07 manual. ･ The AC Adapter 07 is compatible with 100V to 240V AC. For using the terminal overseas, a plug adapter that fits the electrical outlets in the country you stay is needed.
After start of charging with Battery Care, charging pauses once short of full charge. And then charging resumes near estimated full charge time to be on time for full charge. ■ Switching to normal charging To turn off Battery Care charging, from the Home screen, tap [apps folder]u [Settings]u[Battery]u[Battery Care]u of "Use Battery Care". ･ To temporarily stop Battery Care charging and switch to normal charging, drag the status bar down and tap the notification of Battery Care charging.
2 Unfold the power plug of the AC adapter and insert it into a power outlet. Then place the terminal on the desktop holder. 4 When charging is started with the power on, the charging start sound is heard and the notification LED of the terminal turns on (P.55). ･ Check the position of the USB Type-C jack of the terminal and then insert it horizontally to the Type-C plug of the desktop holder.
Attaching/Removing the attachment ■ 1 2 ■ 1 Attaching Check the shape of front/back of the attachment and the attaching part of the desktop holder, then fit the attachment with the desktop holder. Firmly press the attachment straight into the desktop holder and make sure that there are no gaps between the attachment and the desktop holder. Removing Lift both ends of the attachment to remove it while holding the desktop holder.
3 When charging is complete, remove the power plug of the AC adapter from the power outlet, and then remove the Type-C plug horizontally from the terminal. ❖Note Do not connect the Type-C plug of the AC adapter forcibly. Wrong connection may cause damage. ･ Charging with DC adapter DC Adapter 05 (optional) is an adapter for supplying power from a car accessory socket (12V/24V). When using DC Adapter 05, USB cable A to C 01 (optional) is required.
While charging, the reception condition of calling, data communication or TV may become degraded. ･ Take care not to put a foreign metal object between the terminal and a wireless charger. The foreign object may generate heat. ･ Do not put an IC card etc. between the terminal and a wireless charger. The IC card may have a malfunction. ･ When using the camera while charging, the images may have noises.
3 When charging is complete, remove the USB plug of the USB cable A to C from the USB port of PC and then remove the Type-C plug horizontally from the terminal. Turning power on/off Turning power on 1 ❖Note ･ Press and hold the power key for at least 1 second. The terminal vibrates and the lock screen appears after a while. ･ When you first turn on the power and " ようこそ (Welcome)" is displayed, follow the onscreen instructions to make initial settings (P.47).
Turning power off 1 Press and hold the power key for at least 1 second. 2 [Power off]. Setting sleep mode When sleep mode is set, the screen turns off so that you can avoid an incorrect action of the touch screen or the keys, and set the screen lock. 1 Press the power key. ･ Press the power key again to exit from sleep mode and turn on the screen. ❖Information When the specified time set in "Sleep" (P.
Initial settings 2 When you first turn on the power and " ようこ そ (Welcome)" is displayed, follow the onscreen instructions to make initial settings, such as individual functions and services. 1 ･ [GET STARTED]. Tap [ 日本語 (Japanese)] to change the language. ･ Tap [VISUAL AIDS] to make settings related to the accessibility functions. ･ Follow the onscreen instructions to make the following settings.
Basic operations Operations on the touch screen ■ Touch an item such as icon or menu with your finger lightly and release it. ･ Double-tap means tapping twice quickly. Using the touch screen Precautions on using touch screen Touch screen is designed for being touched lightly with fingers. Do not push the touch screen hard with a finger or press sharp objects (nail, ballpoint pen, pin, etc.) against the screen. ･ Touching the touch screen may not work in the following cases.
■ Pinch Touch the screen with two fingers and widen (pinch-out) or narrow (pinch-in) the fingers' distance to zoom in/out screen display. Using Side sense Side sense is a feature that supports onehand operations by the side edge of the screen.
Double-tap the side edge of the screen to open the menu where you can activate applications or turn on/off the terminal functions. Also, slide the side edge of the screen up or down to undo the previous operation (return to the previous screen). Using Side sense menu 1 Double-tap the side edge of the screen ･ ･ The Side sense menu appears. If the explanation appears, tap [START]. a b f c d e ❖Information Side sense feature is not available in the following cases.
e One-handed mode ･ Activate One-handed mode (P.79). f More apps ･ Display more applications that are not currently shown in the application icon list. g Advanced ･ Open the "Side sense" in Settings menu (P.187). Basic key icon operation ❖Information You can move the menu position up/down by dragging the screen while the Side sense menu is displayed. ･ You can start shooting of photos or videos by double tapping the side edge of the screen when the camera shooting screen is displayed (P.138).
Switching portrait or landscape view automatically You can set the screen orientation to switch between landscape and portrait view automatically according to the terminal orientation. 1 2 From the Home screen, [apps folder]u[Settings]u[Display]. of "Auto-rotate screen". ❖Information You can also switch the landscape/portrait view by tapping if appears when you change the terminal orientation although this feature is set to OFF.
Capturing the displayed screen You can capture the currently displayed screen as a still image (Take screenshot). ･ For some applications, capturing of the screenshot is not available. 1 On a screen to capture, press and hold the power key and the volume down key at the same time for at least 1 second. ･ The still image is saved and on the status bar. appears ❖Information Alternatively, press and hold the power key for at least 1 seconduTap [Screenshot] to capture a screenshot.
Selecting an application to use When you have some options of applications for certain operations such as sending an email or displaying an image, an application selection screen appears. Selecting an application to send an email from the phonebook 1 2 3 From the Home screen, [apps folder]u[docomo phonebook]u "Contacts" tabuSelect a contact. Select an email address. ･ An application selection screen appears. Select an applicationu[JUST ONCE]/[ALWAYS].
❖Information If permission is not granted, some applications/ functions may not work, or use of the functions may be limited. ･ To change setting of permissions, from the Home screen, tap [apps folder]u[Settings]u[Apps & notifications]u[See all XX apps]uTap any application you want to change the settingu[Permissions]u / of the permissions. ･ Depending on application/function, an explanation screen for permission may appears. Also, multiple confirmation screens may appear or the display may be different.
Portable hotspot (Wi-Fi tethering) ON Connected to Bluetooth device Airplane mode activated Silent mode (Vibrate) ON Silent mode (Mute) is set Calling with hands-free (speaker ON) Calling with the mouthpiece/ microphone OFF (mute) Alarm is set Do not disturb is set Positioning with GPS Connected to VPN Data saver is set Glove mode is set Battery status The battery is charging Battery is low Charging is required Status bar You can check the terminal status with the icons on the status bar at the top of the
Notification icon The main notification icons displayed on the status bar are as follows. New email message New Gmail message New +Message message New Area Mail Screenshot image is saved Receiving/downloading data Sending/uploading data Notification of data reception etc.
2 or more tethering functions in use AUTO-GPS is set Omakase Lock is set Notification from docomo Data Copy Available internal storage is getting low Notification of data transfer to microSD card exists (decrease of available internal storage) Authentication failed when you set up your d ACCOUNT ― Notification panel P.200 ― P.165 ― ― When the notification icons appear on the status bar, you can open the Notification panel to check the notifications, activate corresponding application, etc. 1 P.
c Notifications ･ Swipe (flick) left or right the notification to clear from the list. However, some notifications may not be cleared. ･ To change the notification setting, drag the notification left or right and tap the displayed , or touch and hold the notification. ･ Drag a notification left or right and tap to clear the notification temporarily and make it appeared again after the specified time elapses.
Quick settings panel Set ON/OFF etc. of each function. 1 Drag the status bar downwards with two fingers. a b c d e f a Brightness level ･ Adjust the screen brightness. b Quick setting tools ･ Touch and hold it to display the setting screen, etc. depending on function. Wi-Fi Bluetooth Auto-rotate Silent mode (XXXX)* Location Flashlight Set ON/OFF of Wi-Fi function. Set ON/OFF of Bluetooth function. Set whether to switch portrait/ landscape view automatically according to the terminal orientation.
d Home screen You can switch the Home screen of the terminal among "docomo LIVE UX", "Xperia Home" and "Simple Home" by changing the Home application. ･ "docomo LIVE UX" (P.87) ･ "Simple Home" (P.65) ･ Switching Home application (P.79) Xperia™ Home screen This section describes the Home screen displayed when the home application is set to "Xperia Home". a b g c h f i a b c Widget : Google Search Widget : Clock Machi-chara ･ Activate my daiz.
If you swipe (flick) on an area of the Home screen where no icons, etc. are displayed, the applications search screen of Xperia Home appears and you can search for applications, contacts, etc. When a screen for selecting contents to be included to search appears, follow the onscreen instructions to set them. ･ A dot or number may appear for shortcut (application) or folder when there is a notification from the application. ･ Adding folders on the Home screen You can put shortcuts, etc.
❖Information Changing wallpaper If a frame is displayed around the added widget, you can drag the frame to resize the widget. ･ To remove a widget, on the Home screen, touch and hold the widgetuDrag it to "Remove from home screen" which appears at the top of the screen. You can change the wallpaper of the Home screen and the lock screen. ･ 1 Touch and hold an area of the Home screen where no icons, etc. are displayed. 2 3 [Wallpapers]. Tap an image to set as wallpaper.
Changing the switching method of the Home screen You can change the switching method of the pages when swiping (flicking) the Home screen left or right. 1 Touch and hold an area of the Home screen where no icons, etc. are displayed. 2 [Transitions]uSelect a switching optionu[APPLY]. Changing the size of the grid You can change the size of the grid of the Home screen or the Application screen. 1 Touch and hold an area of the Home screen where no icons, etc. are displayed. 2 3 [Grid].
Set whether to show names of shortcuts etc. arranged in the dock (P.61). Quick add icons Set to add a shortcut to the Home screen by touching and holding an icon on the Application screen and dragging to any direction a little. Automatically Set whether to automatically place icons arrange shortcuts, etc. on the together Home screen with no empty space. Remove Set whether to permit addition of duplicates duplicative application shortcuts to the Home screen. License Display the licenses.
■ Applications on Simple Home ＋メッセージ (+Message) Phone Apps* Speed dial P.114 P.94 ― P.66 * The list of applications such as "Schedule", "docomo phonebook", etc. is displayed. ❖Information To change to the standard Home screen, from the Simple Home screen, tap [Settings]u[Exit Simple Home]u[OK]u[docomo LIVE UX]/[Xperia Home]. ･ A dot or number may appear for the application icon, folder, etc. when there is a notification from the application.
■ 1 Making a call On the Simple Home screen, select the speed dialu[Call]. ･ ■ 1 Operation during a call (P.99) Sending a message of +Message/email On the Simple Home screen, select the speed dialu[Send message]/ [Send email]. How to send a message via +Message (P.116) ･ How to send email (P.120) ･ How to send Gmail (P.124) ･ Using Settings 1 On the Simple Home screen, [Settings].
Sound Silent/Vibrate mode Ringtone Vibrate on touch Set silent mode. Set ringtone. Set whether to vibrate the terminal when the key icon is tapped. Touch sounds Set whether to emit sound when selecting menu etc. Vibrate when Set whether to vibrate the ringing terminal when receiving a call. Customize Change apps P.68 Home Reorder apps Reset Display the setting menu More settings on the standard Home screen (P.168). Exit Simple Home Change to the standard Home screen.
c Application screen This section describes the Application screen displayed when the home application is set to "Xperia Home". ･ Switching Home application (P.79) 1 From the Home screen, a . d Indicator ･ Display the number of pages and current page position. Swipe (flick) the Application screen left or right to switch the pages. ･ The left end indicates the search screen of Xperia Home. d Menu ･ This menu allows you to rearrange application icons and set the Home screen (P.64).
Anshin Scan*1 An application that allows you to use your smartphone with peace of mind. It detects viruses, helps you understand which applications use your personal data, and alerts you if you are attempting to access potentially dangerous websites. 遠隔サポート (Enkaku support) An application for using " あんしん遠隔サポート (Anshin Enkaku Support)". " あんしん遠隔サポー ト (Anshin Enkaku Support)" is a service that allows staff of the Call center to support the terminal operations by remote-checking the display of your terminal.
Calculator*2 Perform basic arithmetic operations and other various calculations. Phone An application that allows you to use phone calls or make call settings. → P.94 Google Docs*3 Create, edit and share documents, as well as view, edit and save Word files. Clock Use alarm, world clock, stopwatch and timer. → P.163 docomo phonebook*1 A phonebook application provided by DOCOMO. It allows you to manage your docomo account's phonebook data in the cloud. → P.
マクドナルド (McDonald's) An official application of McDonald's. You can search nearby McDonald's with the shop search function, or obtain good value coupons that can be used in the shop or the latest information. You can save or use the points in a single operation if you log in with your d ACCOUNT etc. Maps*3 Use Google Maps services, such as viewing the current location, finding another location and searching the routes. → P.
dphoto*1 A service for backing up photos or videos up to 5GB to cloud free of charge, then accessing the backup data from smartphones, tablets or PCs. Also, there is a service option that creates a photobook using the photos in the cloud or the terminal (To use, separate subscription to the charged service is required). d Healthcare*1 It is a health care application with which you can measure your steps, manage your body weight, etc.
Instagram Freely edit the photos and videos taken with your terminal and share them easily with people around the world. Messenger*6 Send messages or make calls or video calls to the contact of the mobile phone or the friend/ group of Facebook. MHXR*5 Enjoy full-scale hunting of MONSTER HUNTER on your smartphone. MONSTER HUNTER EXPLORE ©CAPCOM CO., LTD. ALL RIGHTS RESERVED. Movie Creator Automatically creates high spot movies from the pictures and videos you have taken.
3D Creator Use the camera to scan people or objects in 3D with this application. Also, scanned data can be set as wallpaper or create a 3D print. + メッセージ (+Message) You can send/receive text message to/from a mobile phone number as a recipient. You can also send images, videos, stamps, etc. other than texts. → P.114 *1 Stored in the " ドコモ (docomo)" folder. *2 Stored in the " ツール (Tools)" folder. *3 Stored in the "Google" folder. *4 Stored in the "Sony" folder.
❖Information When "Quick add icons" (P.65) is set to ON, you can add application shortcuts to the Home screen just by touching and holding application icon etc. and then dragging to any direction a little in Step 1. ･ When "Remove duplicates" (P.65) is set to ON, previously added shortcut will be deleted automatically if application shortcut added to the Home screen is duplicated.
Rearranging application icons When the order of application icons is set to "Own order" in the menu (P.69), you can rearrange your application icons as you like. 1 On the Application screen, touch and hold an iconuDrag it to any position you like. ❖Information To add a new page of the Application screen, while rearranging the application icons, drag the application icon to the right end of the right end page.
Split screen Split the screen to display and operate two applications at the same time. ･ Activate the applications to display beforehand. ･ Split screen may not be available depending on application. 1 2 . ･ Touch and hold the application thumbnail to displayuDrag to the "Drag here to use split screen" appeared at the top of screen. ･ 3 Applications are displayed as thumbnails. ❖Information ･ ･ ･ ･ ･ Alternatively, touch and hold when the application is activated to open the split screen.
One-handed mode Reduce the screen so that you can easily operate the terminal with one-hand. 1 Swipe (flick) the key icon (P.51) area left or right. ･ When swiping (flicking) left, the reduced screen is shown in the bottom left, or when swiping (flicking) right, the reduced screen is shown in the bottom right. ❖Information ･ ･ ･ ･ ･ ･ Tap [LEARN MORE] at the top of the screen to display "One-handed mode" of the setting menu (P.186).
Searching information in the terminal and websites Enter a word in the search box to search the information in the terminal or on the Internet. 1 From the Home screen, tap the Google search widget. 2 Enter a keyword to search. 3 ･ ･ Character entry (P.80) The search candidate list appears. Tap the search suggestion or on the software keyboard. ❖Information Alternatively, from the Home screen, tap [Google]u [Google] to open the "Google" application.
Switching the input method You can change the input method other than Xperia Japanese keyboard. 1 While entering characters, tap at the bottom of the screen. ･ 2 Software keyboard For Xperia Japanese keyboard, the following software keyboard can be used. ･ Character input method (P.82) Keypad The Change on-screen keyboard screen appears. Select the input method you want to use. QWERTY ❖Information When the language is set to English, the default keyboard is set to "SwiftKey Keyboard".
Keyboard layout Switch to QWERTY/ Switch to keypad One-handed keyboard My Words Settings Set software keyboard (Keypad or QWERTY) for each character mode. Switch to QWERTY/keypad. Change the keyboard size for onehanded operation. P.86 Change Xperia Japanese keyboard settings. Keyboard skins Change software keyboard skin. Online help P.80 For beginners Select "Online help" to display "POBox Plus 日本語入力 使い方ガイド (Online help for Xperia Japanese keyboard)" (in Japanese only) (P.80).
b i Show/hide the quick tool bar. Enter a line feed. Appears when entering using the keypad. Characters assigned to a key appear in reverse order. / Appears when entering numbers, tap to switch onebyte/two-byte character. / / When entering alphabet letters on QWERTY, tap to switch lower case, capitalization and upper case. Appears before fixing character and fixes the character. * In some screens, , , , , etc. appear. c Move the cursor to the left. / Hide/show the list of symbols, facemarks, etc.
Flick input Multi-tap input Touch a key of Keypad to display the character, number, or symbol assigned to the key. Flick to the direction of target character to enter the character. ･ On the QWERTY keyboard, flick each key up or down to enter upper case character, number, or symbol. On the Keypad, tap the same key continuously to enter character, number, or symbol which is assigned to the key.
Editing text When you touch and hold or double-tap a text in the character entry screen or websites, the edit menu appears near the selected text. Drag or to change the character string to select. Cut Copy Paste Share Select all Web search Cut a selected character string. Copy a selected character string. Paste a copied/cut character string. Use the selected text in the other application. Select all text. Search for online information related to the selected character string.
My Words You can add words to My Words beforehand to have them appear as preferred candidates when entering characters. 1 From the character entry screen, in the quick tool bar. Setting character entry You can make settings for character entry by input method such as Xperia Japanese keyboard or check the application information or use method of Moji-Henshu. Details of the quick tool bar (P.82) 1 2 3 4 [My Words]. . Tap entry of "Reading"uEnter a reading.
docomo LIVE UX docomo LIVE UX docomo LIVE UX is a Home application which allows you to customize the Home screen instinctively and use a new search service "My Magazine" which displays public trends or various information according to customer's preferences in magazine format. For details on docomo LIVE UX, from the Home screen, tap u u[Help] to see Help, or refer to the following website. https://www.nttdocomo.co.jp/service/ live_ux/index.
g Customizing area ･ Locate application icons, widgets, folders, etc. h Folder ･ Contains the application icons etc. i My Magazine button ･ Display My Magazine (P.92). ❖Information ･ When there is a notification which indicates update of application is displayed in the Notification panel or there is any application icon which is shown in gray, download the application (P.75). Managing the Home screen Moving application icon, etc. 1 In the Home screen, touch and hold an icon you want to move.
Uninstalling the applications Before uninstalling, back up all of the related contents which you want to save including the data saved in the application. ･ Some applications may not be uninstalled. ･ 1 In the Home screen, touch and hold an icon of application you want to uninstall. ･ ･ 2 The shortcut menu appears. To uninstall applications in a folder, tap a folder and then touch and hold an application to delete. [Uninstall]u[OK]. For applications that cannot be uninstalled, "Uninstall" is not shown.
Changing wallpaper 1 Touch and hold an area of the Home screen where no icons, etc. are displayedu[Wallpaper and Kisekae]. ･ 2 3 Alternatively, in the Home screen, tap u[Wallpaper & Kisekae]. Tap an image to set as wallpaper. ･ Setting Machi-Chara display display 1 Touch and hold an area of the Home screen where no icons, etc. are displayedu[Home setting]u [Machi-Chara setting]. 2 / of " キャラ表示 (Show character)".
Using Osusume Apps Searching an application It is a service which recommends applications according to your usage condition. It is a function which allows you to search an application in a list sorted by used or installed order, or by an application name. 1 2 3 From the Home screen, [Recommends]. ･ . When using for the first time, the use confirmation screen appears. Tap [ENABLE] to the explanation screen appears.
Backing up and restoring the Home screen You can use docomo LIVE UX data backed up on the docomo cloud to restore the layout of applications, widgets, and other items on the Home screen. At that time, a page for docomo services is added to the last (page) of the Home screen. ･ To use the backup and restore features, you need to set up your d ACCOUNT (P.200). Backing up the Home screen 1 2 3 Touch and hold an area of the Home screen where no icons, etc. are displayedu[Home setting].
Setting the category display 1 2 From the Home screen, . u[Display category setting]. Marked categories will be displayed on My Magazine. ･ Tap at the upper right of the screen to sort the categories. ･ Home application information You can check the version information, etc. of docomo LIVE UX. 1 2 From the Home screen, [About]. ･ u . If the update of docomo LIVE UX is available, "Update now" is displayed in the application information screen. Tap it to update docomo LIVE UX.
Phone Making/Receiving a call Making a call/video call 1 2 From the Home screen, u . Enter a phone numberu . 3 When the call is finished, To make a video call, enter a phone numberu u[Make video call]. ･ Tap to delete the number. ･ . ❖Information In Step 2, tap without entering a phone number to enter the phone number registered as the latest call in the call history.
Emergency call Emergency call Police call Fire and emergency rescue Coast guard Phone number 110 119 118 ❖Note ･ When calling 110, 119 or 118 from the terminal, tell that you are calling from a mobile phone, and give your phone number and your current location precisely for checking callback from the Emergency call acceptance organization such as police. Also, make a point to call in a stationary position to prevent the call from being dropped.
Entering pause (,)/(;) to send For using services requiring entry of number during a call such as check of the balance of a bank account, reservation of tickets, etc., enter an additional number to a phone number beforehand and make a call. ■ 1 2 3 ■ Making an international call (WORLD CALL) Using 2-second pause (,) WORLD CALL is a service for making international calls, which is available from DOCOMO's mobile phones in Japan. For details on WORLD CALL, refer to NTT DOCOMO website.
Answering calls with Answering Machine Receiving a call/video call When a call or video call comes in, the incoming call screen appears. ･ If the screen is on (except on the lock screen) or an application is running, the notification appears at the top of the screen (P.98). 1 Swipe (flick) screen. ･ 2 up on the incoming Even when Answering Machine is not set, you can activate Answering Machine manually. 1 ❖Information ･ To receive a video call, swipe (flick) or the image up.
Declining a call 1 Receiving a phone/video call when an application is running On the incoming call screen, swipe (flick) ･ . To decline a video call, swipe (flick) or the image down. Rejecting an incoming call and sending a message If the screen is turned on (except on the lock screen) or an application is running when a call comes in, the notification appears in the upper screen. 1 [ANSWER].
Operations during a call c On the Calling screen, you can set voice output or mute, or enter a phone number to make a call to another party. ■ i o j d Screen displayed during a voice call l m a b c d e f i j k g h ■ Screen displayed during a video call While on a video call, the other party's image and your image are displayed and the control icons are hidden. Tap the screen to show the control icons. n h a b c Photo/image set in a contact Name, phone number, etc.
j Speaker: Set ON/OFF of speakerphone. ･ Other party's voice can be heard from the speaker and handsfree call can be made. ･ Video calls are made or received with the speakerphone turned on. ･ When the terminal is connected to Bluetooth device etc., tap it to switch audio output. k Hold call: Hold/resume voice call. l Switch camera ･ Tap this icon to switch between cameras for shooting your image. m Menu ･ To switch the display area between the the other party's image and your image, tap u[Switch videos].
c Call history Incoming calls and outgoing calls are displayed by chronological order in the call history screen. ･ Number of items that can be saved to the call history (P.248) Showing call history 1 ■ u" From the Home screen, tab. " Call history screen a b c f d h g Phone number/name ･ Tap to open the menu of "Call", "Video call", "Create new contact", "Add to a contact", "Send a message", "Number blocking", and "Call details".
Adding a number from the call history to Phonebook u" Displaying missed calls 1 From the Home screen, tab. " 2 Tap a phone numberu[Create new contact]/[Add to a contact]. Alternatively, touch and hold a phone numberu[Edit number before call]u [Create new contact]/[Add to a contact]. ･ When you tap [Add to a contact], tap [Add to the existing contact] and select the contact to add to. ･ 3 On the profile edit screen, enter necessary information such as name. ･ 4 To add items, tap [Add other items].
2 [Settings]u[Calls]u[Answering Machine]. Answering Machine Pick up after Use while roaming Greetings Messages Checking messages in Answering Machine via Phone application Set whether to use Answering Machine. Set a ringing time for answering. Set whether to use Answering Machine when you stay abroad. Switch the answering message language to Japanese or English. Check recorded messages. To check messages in Answering Machine via Phone application, operate as follows.
Call settings You can set the network services, set call rejection, or edit Reject call with message. 1 2 From the Home screen, [Settings]u[Calls]. u . Record caller's message when you cannot answer an incoming call. Call Forward a call when you forwarding cannot answer an incoming service*1 call. Call Put the current call on hold Waiting*1 and answering an incoming call or making a call to another party. Caller ID Set whether to notify your notification caller ID when making a call.
Prefix settings Suguden setting Contact docomo*2 Calling accounts Extension line service setting Register a prefix number added before phone number when making a call. P.105 Make a call to General Inquiries, inquiries for damage, theft or loss overseas or damage overseas. Set Internet phone (SIP) account. Make settings to use the オ フィスリンク (Office link) holding and forwarding line service and prefixes. ･ The Office Link is an extension line service for corporate customer.
Mute, Reject Set whether to mute the incoming ringtone or reject a call by placing the terminal horizontally with the screen faced down while a call is incoming, or shaking the terminal twice. You can select from "Mute", "Reject", or "Reject and send SMS". Call ranking Check the other party whom you called many times. Hide the Set whether to show a name/image name when saved in the phonebook by moving receiving the terminal when receiving call. Sending of Set whether to send your use user information.
･ Suguden does not support video calls, but the "Hide the name when receiving" setting is compatible with video calls. Functions of Suguden ● Disconnect (Motion) ･ When the motion is performed, a call will be disconnected even in the following cases.
Although the voice command function of Suguden uses the voice recognition technology or the language processing technology, DOCOMO is not liable for any accuracy of those technologies. ･ The voice recognition may fail when the volume of voice is too small during a call or calling under a noisy environment, or depending on the way of utterance. ● Dialing A Suguden call can be made from the Home screen or the lock screen (when "Screen lock" is set to "None" or "Swipe").
■ k Contacts screen On the Contacts screen, you can view names of contacts etc. You can set a photo or image to a contact, and display contacts by group. a d bc Managing phonebook Adding a new contact i 1 e a Index ･ Display the index character to search entries in the order of Japanese syllabary, alphabet, etc. f j g h k Group tab ･ Display the phonebook group. b Cloud ･ Log in to cloud ("Use of Cloud" screen is displayed) or log out of cloud ("Suspend sync" screen is displayed).
Making a call/video call from the phonebook 1 2 From the Home screen, [apps folder]u[docomo phonebook]u "Contacts" tabuSelect a contact. On the profile screen, tap . ･ To make a video call, tap of u[Video call]. in the right Editing a contact 1 From the Home screen, [apps folder]u[docomo phonebook]u "Contacts" tabuSelect a contact you want to edit. 2 3 4 On the profile screen, [Edit]. Select a required item and edit. [Save].
■ Phonebook list screen Select and delete several/ all contacts. Cloud menu* Display cloud menu. SD card/SIM card/ Export/import common phonebook entries or send them via Bluetooth, Email (P.113), etc. Settings International Set for using docomo use setting for phonebook overseas. docomo phonebook d ACCOUNT/ Set a d ACCOUNT to use Wi-Fi settings docomo services via Wi-Fi. Set character Set a character code for code when exporting the contacts sharing data.
Setting contacts to Group 1 2 3 From the Home screen, [apps folder]u[docomo phonebook]u "Group" tab. Tap a group. [Add member]uMark contacts to addu[OK]u[OK]. ❖Information To cancel group setting, in Step 3, [Delete member] uMark contactsu[OK]u[OK]. ･ When you set Google account etc., groups are displayed by account. You can set/cancel group in the same account. ･ Creating a new group in the phonebook 1 From the Home screen, [apps folder]u[docomo phonebook]u "Group" tab. 2 3 [Add group].
Importing/Exporting/Sharing phonebook entries Phonebook entries can be imported from a microSD card or docomo nano UIM card, or exported to a microSD card. This is useful, for example, when you want to move the contact information to another phone. Also, sending all phonebook data via Bluetooth function, Email, etc. is available. ･ You can also use an online synchronization service to synchronize your contacts (P.202). ･ For exporting to/importing from a microSD card, insert a microSD card in advance (P.
Mail/Web browser docomo mail ＋メッセージ (+Message) Send/receive mails using DOCOMO mail address (@docomo.ne.jp). Data can be easily transferred when changing models or restored when you have lost the terminal since sent and received mails are saved on the docomo mail server. Also, your d ACCOUNT allows you to use the same email address to send, receive, and view email on several devices, such as tablets and computers. For details of docomo mail, refer to NTT DOCOMO website. https://www.nttdocomo.co.
■ c Contact list screen a d b c e f Message list screen i g h j a It is an icon indicating he/she is a user of +Message. You can exchange group messages, photos, stamps, etc. among the contacts with this icon displayed. e Contacts ･ Tap to check detail of contact. f : Add a contact with QR code/add a new contact g Profile image ･ The other party's profile image is displayed.
Sending a message 1 2 4 Message screen ab From the Home screen, [ ＋メッセー ジ (+Message)]. u u[New message]/[New group message]. ･ 3 ■ Group message is a function which allows multiple +Message users ( icon displayed in the contact) to exchange messages among them. g c d e Select a recipient. To send a recipient who is not registered to Contacts, tap and input a phone number directly. ･ For group message, select multiple recipients and then tap [OK].
e : Display a sharing menu to send photos, stamps, location information, etc. ･ While the sharing menu is displayed, you can use functions such as sending images or recording voice. f Message entry field ･ You can enter a message. g : Send an entered message. h Message delivery status ･ : The recipient has checked the message It is available only when the settings of "Use message read function" of both sender and recipient are ON.
Reading a message Sent/received messages are displayed in thread by recipient/sender. 1 2 From the Home screen, [ ＋メッセー ジ (+Message)]. uSelect a message thread. ･ Deleting a message 1 2 3 Functions used for replying to messages (P.116) From the Home screen, [ ＋メッセー ジ (+Message)]. uSelect a thread. Touch and hold a messageu u[DELETE]. ･ Forwarding a message 1 2 3 4 From the Home screen, [ ＋メッセー ジ (+Message)]. uSelect a thread. Touch and hold a messageu . Enter a recipient and messageu (Send).
Changing the settings of +Message 1 2 From the Home screen, [ ＋メッセー ジ (+Message)]. u[MyPage]u[Settings]. Set for messages, back up/restore, etc. Photos and Set for file attachment, etc. such as videos photos or videos when sending/ receiving. Screen display Set the theme collore, or background of message screen. Notification Set notifications. Privacy Set a passcode, block list, etc. Others Set Transfer user information, Initialize +Message service, etc.
4 Follow the onscreen instructions to configure necessary itemsuTap [NEXT] to finish the setting. ･ 5 If the screen for selecting type of account appears, tap the type of the email account and follow the onscreen instructions to set. Creating and sending email 1 From the Home screen, [apps folder]u[Email]. 2 3 (Write new message). Enter the email address of recipient. Enter your account name and the name to be displayed in your outgoing emailsu[FINISH SETUP].
Receiving and reading email 1 From the Home screen, [apps folder]u[Email]. ･ 2 On the Inbox, flick the screen down. ･ 3 If you have set up more than one email account, tap u uTap the email account to receive the emails. This refreshes the Inbox. Saving attachment file of email 1 From the Home screen, [apps folder]u[Email]. 2 Tap an email with attached files. 3 4 [SAVE] of file to save. Select a saving destinationu [SAVE]. Tap an email you want to read.
❖Information To delete the original email content, unmark "Quoted text". ･ When you forward an email, the attachment file of the original message is attached. To delete attached file, tap . ･ Changing Email account settings Setting up an email account that supports IMAP 1 From the Home screen, [apps folder]u[Email]. u[Settings]. Tap an Email account you want to change the settings for. Deleting email 1 From the Home screen, [apps folder]u[Email]. 2 3 2 3 Tap an email to delete. Tap .
General Account settings name Your name Incoming settings Outgoing settings Signature Quick reply Security Temporary files Delete account Change account name. Change your name (sender name). Specify a username, password, and other settings for the incoming server. Specify a username, password, and other settings for the outgoing server. Change your signature or specify how to insert it. Register phrase that can be inserted when creating an email.
Sending Gmail 1 2 3 Early Warning "Area Mail" From the Home screen, [Google]u [Gmail]. (Compose). Enter the email address of recipient. When you enter a name or email address in the email address field, contacts matched to the entered numbers or letters are listed. ･ Tap to add Cc or Bcc recipients. ･ 4 5 Enter a subject and message. (Send). ❖Information To attach a file, when creating a Gmail, tap [Attach file] and select the file. ･ u Refreshing Gmail 1 From the Home screen, [Google]u [Gmail].
･ Area Mail (earthquake early warning) that could not be received cannot be received later. Area Mail (tsunami warning, emergency warning related to weather etc., disaster/ evacuation information) can be resent. In the case you could not receive it, you can receive it again. Checking received Area Mail later 1 From the Home screen, [apps folder]u[Disaster kit]. 2 3 [Early Warning "Area Mail"]. Select an Area Mail from the Area Mail list.
3 u[Settings]. Receive setting Emergency alert history Vibrate Alert reminder sound Use full volume Set whether to receive Area Mail. Display a list of received Area Mail. Set vibration of incoming Area Mail. Set whether to remind of alert after Area Mail is received. You will receive alert reminder with the dedicated beep sound and vibration. ･ When "Once" is set, you have an alert again only once in 2 minutes after Area Mail is received.
❖Information Chrome ･ Use "Chrome" application to view websites like on a PC. You can use "Chrome" application via packet communication and Wi-Fi network with the terminal. Viewing websites 1 2 3 When address entry field is not displayed, flick down the screen to display. Enter a website address or keyword to search. While appears in the address entry field, tap to enter a search word in voice sound. ･ As you enter an address or characters, retrieved website list appears.
Changing tabs 1 2 Changing Chrome settings . ･ Currently opened tabs are displayed with thumbnails in a list. Tap the tab. ❖Information ･ A number in the icon explained in Step 1 varies by the number of tabs that are opened. Closing a tab 1 u ･ of tab you want to close. Alternatively, flick a tab left or right to close it. ❖Information ･ A number in the icon explained in Step 1 varies by the number of tabs that are opened.
Operating links Checking history From the Home screen, [History]. Tap a history to check. Touch and hold a link or an image in a web page to copy the URL or download the image. 1 ❖Information ❖Information In some website, downloading of files etc. may not be available. ･ Managing bookmarks and history 2 ･ ･ u u To delete history, tap of history. To delete all history, [CLEAR BROWSING DATA...
Camera Activating the camera Camera All still pictures or videos that you capture on the terminal are stored into the internal storage or a microSD card. ･ To save still pictures and videos to a microSD card, insert one and specify it as the destination where you want to save them, before using the camera (P.138). ･ When the terminal temperature becomes high, the camera may not activate or may stop.
l Shooting screen a e f g h i j k a b c d l m n o Display area for status icons ･ When the settings such as Smile Shutter (P.137) and Save location (Geotagging) are set, the icons are displayed here. b Auto focus frame c Zooming indicator ･ An image is shot in magnification displayed. d Thumbnail ･ Tap to display the play screen of shot photo or the preview screen of video (P.143). To return to the shooting screen, swipe (flick) the screen up/ down.
You can use the capturing mode such as "Manual", "Slow motion", "Portrait selfie" other than "PHOTO" and "VIDEO" to shoot various photos or videos. Capturing Still image size/Video size mode Slow Super slow motion : motion Full HD/HD (30fps/960fps) Super slow (one-shot) : Full HD/HD (960fps) Slow motion : HD (120 fps) Changing the capturing mode ❖Information Capturing mode ･ 1 2 From the Home screen, [Camera]. On the shooting screen, [MODE]u Select a capturing mode.
■ Notes on shooting with Panorama The following cases are not suitable for shooting with Panorama. - Shooting a moving object - Shooting the main object that is too close to the camera - Shooting an object with repetition of the same pattern such as a sky, beach, grass, etc. - Shooting a big object - Shooting an object with constantly changing pattern such as a wave, waterfall, etc. ･ Because two or more images are joined together, joints may not be recorded smoothly.
Press the camera key 3 ■ When shooting with auto focus function, press the camera key halfway, and after the auto focus frame changes to blue, firmly press the camera key to the rest of the way until it stops. ･ When "Burst with camera key" (P.138) is set to ON, you can shoot continuously (up to 100) while the camera key is kept pressing. 1 2 3 Set "Use Volume key as" (P.138) to "Shutter" in advance. 1 2 From the Home screen, [Camera]. Swipe (flick) the screen to display "PHOTO" mode shooting screen.
■ 1 2 3 4 ■ Shooting with the start/stop icon From the Home screen, [Camera]. Swipe (flick) the screen to display the shooting screen in "VIDEO" mode. Tap the start shooting icon ( Tap the stop icon ( ). ･ Tap the pause/start shooting icon ( ) to pause/resume shooting. 1 2 From the Home screen, [Camera]. Swipe (flick) the screen to display the shooting screen in "VIDEO" mode. 3 Tap the shooting screen. 1 2 ･ Press the camera key again to stop shooting. Shooting with the volume key ･ ).
■ Changing settings when shooting Select capturing mode of "Slow motion". Super slow motion Shoot a moment when is tapped while shooting a video with the Super slow motion mode. Super slow (one-shot) Shoot a moment when is tapped with the Super slow motion mode. Slow motion Shoot video in 120 fps and then select scene to show in slow motion. ･ By shooting with "Slow motion", 120fps video is saved and a separate video file with slow motion scene set is saved as a slow motion file.
■ Touch to adjust : "Manual"*1 Set functions to be adjusted at the tapped position on the shooting screen. Object tracking The camera will keep focusing on an object even if it moves by tapping an object on the shooting screen. Focus only Focus on an object. Focus and brightness Focus on an object and adjust brightness to the object. ■ Spot Measure photometry only at the center of the shooting screen to adjust the exposure. ■ Set the function of shooting automatically.
Standard Reduce camera shake blurring when shooting normally. ■ ■ Set whether to allow the camera to shoot when tapping the shooting screen. If you set "Only front camera", the Touch capture is available by switching to the front camera. File format (4K) : "VIDEO"*1 Select the compression format for shooting videos with 4K from "H.264" or "H.265".
■ Smart launch ■ Set operation for briefly activating the camera in sleep mode or from the lock screen. Touch to launch Tap the circle to open the shooting screen. Touch to launch and capture Tap the circle to open the shooting screen and shoot a photo at the same time. ■ Launch with camera key Set the operation for activating the camera by pressing and holding the camera key for at least 1 second. ■ Help Display Help for the camera function.
■ HDR : "VIDEO" ■ Set whether to shoot videos having presence in a state closer to that seen with the eye even when there is contrast in brightness. On Off ･ To play back as a HDR video with the other device etc., a compatible device and service are required. ■ ■ Set the number of seconds for the selftimer. The shutter icon changes into a timer icon. Tap it to shoot after set period of time (seconds) elapses. Use the self-timer to take a self-portrait or group photo.
■ Manual advanced setting : "Manual" You can set white balance, ISO, etc. manually. Tap to show/hide the setting icons. White balance Set according to the ambient light source. Tap to set. Incandescent Fluorescent Daylight Cloudy AUTO Brightness (EV) uTap a point on the bar or drag the marker. ISO uTap a point on the bar or drag the marker. ･ With ISO sensitivity up, you can shoot clear picture reducing blur even in a place where lightning is poor. However, noise stands out.
To set Slender face, etc. tap the iconuTap a point on the bar or drag the marker. Slender face Eye enlargement Skin brightness Soft skin Bokeh ■ Switch of effect : "Creative effect" Tap ■ Album View/play photos or videos. Displaying photos/videos 1 to switch a type of effect. Resolution : "Bokeh" ■ Set resolution. 8MP (16:9) 8MP (4:3) 2MP (16:9) From the Home screen, [Album]. ･ Images are displayed in a list in chronological order.
f Slow motion file ･ is displayed for a file before editing when it is shot with "Slow motion" (P.136). g Sound Photo file h 4K video file Viewing a photo 1 The photo is played. Tap the screen to show/hide information such as shooting date or icons such as menu. ･ For Sound Photo files, audio is also played back. Each time you tap to play the audio. ･ For the files shot with Predictive Capture, tap [SELECT THE BEST] to select the photo to save.
b Shot date ･ When a location information is saved, its relevant country or place name is displayed. Tap u [Show on map] to view the image on a map. c Share ･ Upload files to online services, send them via Bluetooth or email. d Add to Favorites/remove from Favorites e Menu ･ You can set Play slideshow, Use as, Rotate, Details, Add/Edit geotag (location information), etc. ･ To show the date setting of photo, tap u [Details]u . f Delete g Edit photos Playing a video 1 A preview screen appears.
d e Video file name/Recorded date Show/Hide operation icons ･ Show/hide operation icons such as 10 seconds fast forward or the setting icon for repeat play. f Progress bar ･ Tap on the bar or drag a marker left or right to change a playback position. ❖Information To zoom in/out a video display, pinch out/in on the video playing screen. ･ The display or menu may differ depending on use condition of the application or selected file. Also, some files cannot be operated.
Apps dmarket d メニュー (dmenu) In dmenu, you can easily access sites recommended by DOCOMO or convenient applications. 1 From the Home screen, [d メニュー (dmenu)]. ･ Browser is activated, "d メニュー (dmenu)" appears. ❖Information To use dmenu, make sure that the terminal is connected to the network (P.56). ･ For connecting dmenu and downloading applications introduced in dmenu, packet communication charge is applied separately. Some applications automatically perform packet communications.
Installing an application Play Store Use Google Play to install useful applications or fun games to the terminal. ･ To use Google Play, you need to set a Google account (P.201). ･ For details on purchasing applications, returning your purchases, or requesting a refund, see Google Play Help. ･ Once you accept the installation of an application, you will be held responsible for its use. Be careful especially about applications which access many functions or large amount of data.
Osaifu-Keitai This function allows you to use " おサイフケー タイ対応サービス (Osaifu-Keitai compatible service)" by which you can pay money or use as a point card. You can save electronic money and points to an IC card of the terminal and a docomo nano UIM card to check the balance or points on the screen. Also, you can prevent from being used without asking in case of theft or loss by locking Osaifu-Keitai function. For details on Osaifu-Keitai, see NTT DOCOMO website.
Notes on holding over the device Please note the following when holding the terminal over an IC card reader or NFC module equipped device. Using "Osaifu-Keitai compatible service" To use the Osaifu-Keitai compatible service, set services from the Osaifu-Keitai application. 1 From the Home screen, [apps folder]u[Osaifu-Keitai]. ･ Bring mark close to the device slowly without hitting it strongly. ･ Hold mark over the center of the device in parallel.
The Osaifu-Keitai compatible application performs communication which is necessary for providing the Osaifu-Keitai service in the background regardless of "STAMINA mode" (P.184) or the setting of "Data saver" (P.174). ･ Depending on your installed Osaifu-Keitai compatible application or its settings, your terminal may not respond even when you hover it over an IC card reader when the screen is locked, the display is off, or the terminal is powered off.
NFC NFC is an abbreviation for Near Field Communication and a short range wireless communication method of international standard defined by ISO (International Organization for Standardization). You can use a contactless IC card function, Reader/Writer function, P2P function, and others. ■ Tap & pay You can set whether to enable or disable Osaifu-Keitai compatible services or other services that you can use by hovering your terminal over an IC card reader.
TV TV is an application with which you can switch between Full seg and 1Seg and watch according to the air wave reception condition. In addition, since the data broadcasting can be received with images and sounds, interactive service using communication function of mobile devices and receiving detailed information are available. With Full seg, you can watch a terrestrial digital TV broadcasting service in high-vision quality.
Also, even in a terrestrial digital TV broadcasting service area, reception condition may be poor or reception may be unavailable in the following places: ･ A place far from the tower that the airwaves are sent from ･ Mountain-ringed regions or a place between buildings where airwaves are interrupted by geography or buildings ･ Tunnel, underground or far back from a building where airwaves are weak or do not reach Changing the direction of the TV antenna cable or moving to another location may improve signa
h Channel, broadcasting station and program information i Reception signal level j Start recording k Channel selection key ･ Touch and hold / to search available channels. l Data broadcasting ･ On the 1Seg watching screen, data broadcasting can be viewed only in the portrait screen. m Data broadcasting remote control ･ ❖Information ･ ･ ･ ･ ･ ･ ･ In portrait screen in Full seg, you can see a remote control for data broadcasts, and you can display a channel list and program information.
Setting TV You can set TV watching screen, data broadcasting and channel. Using menu Reserve recording/viewing TV program or make each setting. 1 2 From the Home screen, [apps folder]u[TV]. . ･ Alternatively, slide the left end of the TV watching screen right to display the menu. Display the program guide. Display detailed information of the program currently watched. ･ Tap u[Reserve Recording/Viewing] to display a screen of recording reservation.
Subtitle position Set the subtitle position in landscape view in 1Seg. * Some TV links have period of validity. Saving channels in the current location Changing TV remote control number Change TV remote control number assigned to each broadcasting station. Each broadcasting station can be called up via the corresponding TV remote control number. 1 From the Home screen, [apps folder]u[TV]. 2 3 Touch and hold an image.
Recording TV Record images, sound, captions or data broadcasting while displaying. ･ Data broadcasts can be recorded only in 1Seg mode. 1 From the Home screen, [apps folder]u[TV]. 2 3 Tap to start recording. u[Stop recording]/[Stop recording as end of program]. ･ To end the recording when the program ends, tap [Stop recording as end of program]. Playing a recorded program 1 From the Home screen, [apps folder]u[TV]. 2 3 u[Recorded program list]. Tap a program to play.
Music When is displayed at the upper right of screen, music can be played with Google Cast devices. Tap and then follow the onscreen instructions to connect. To play music data on a Google Cast device, connect the terminal to the same Wi-Fi network as the one the Google Cast device connected in advance (P.169). ･ Use Music to play back music stored in the internal storage or a microSD card. ･ File formats of playable data (P.
Location services Your current location can be positioned using GPS, Wi-Fi, or mobile network. GPS function The terminal has a GPS receiver that uses satellite signals to calculate your location. Some GPS features use the Internet. Data rates and charges may apply. When you use GPS function to find your location, make sure you have a clear view of the sky. If GPS does not find your location after several minutes, move to another location.
■ Where radio waves are difficult to receive Note that radio waves may not be received or it may be difficult to receive radio waves in the following conditions, since GPS uses radio waves from a satellite.
Finding the current location on the map You can detect your current location using location information service. ･ To detect current location, enable "Location" (P.160) beforehand. 1 From the Home screen, [Google] u[Maps]. Current location is shown by blue mark. ･ To show the current location when it is not shown, tap . ･ If you tap , the icon changes to , and then the terminal's geomagnetic compass links the direction displayed on the map.
Creating schedule event Schedule Displaying schedule 1 2 From the Home screen, [apps folder]u[Schedule]. u[Monthly]/[Week]/[Daily]. ･ Flick the calendar left or right to display the next or previous month/week/day. ❖Information To move the cursor to the current date, in Step 2, tap u[Jump to]u[TODAY]. To move the cursor to the desired date, in Step 2, u[Jump to]uFlick the calendar left or right to select month and then tap a dayu[JUMP].
Setting display conditions in Schedule When a search criteria is set, specified data can be displayed. 1 2 3 From the Home screen, [apps folder]u[Schedule]. u[Conditions]. Select the display conditionu[OK] u . ❖Information ･ To search the contents entered in "title", "text" and "Where?", in Step 3, [Free word search]uEnter a search wordu[OK]u[OK]u . Clock Use alarm, world clock, stop watch and timer. Setting an alarm 1 2 3 4 From the Home screen, [apps folder]u[Clock]. uSet a timeu[OK].
Stopping alarm 1 Using Stopwatch While alarm is sounding, drag to the right. ❖Information If you tap [SNOOZE], the alarm sounds again when the set time has passed. ･ Alternatively, you can operate by tapping the notification at the top of the screen when the display is on (except on the lock screen). ･ Display the date and time, time difference from the home city, etc. in cities around the world. 2 From the Home screen, [apps folder]u[Clock]u"World clock" tab.
docomo Data Copy docomo Data Copy application allows you to copy the data saved to the terminal to the other terminal or back up/restore the data. Use this application for transferring the data when changing the model or for the regular backup of important data. ･ Data may not be copied, backed up, or restored correctly depending on OS or file type. Data transfer You can copy the phonebook entries, images, etc.
If the battery is low, backup or restoration may not be done. In that case, charge the terminal and retry to back up or restore. ･ You can back up only the data such as still images and movies stored in the internal storage with this application. The data stored in a microSD card cannot be backed up. ･ Backing up Back up the data such as phonebook entries or media files to a microSD card. 1 From the Home screen, [apps folder]u[Data Copy]u[Backup & Restore]. 2 3 4 [Backup]. Mark the data to back up.
Copying contacts to docomo account Backing up/Restoring to/from Data Storage BOX Copy the contacts in your Google account to the docomo account. 1 From the Home screen, [apps folder]u[Data Copy]u[Backup & Restore]. 2 [Phonebook account copy]u [Select] on Google account contacts to copyu[OVERWRITE]/ [ADD]. ･ 3 The copied contacts are saved to your docomo account. You can transfer or back up/restore the data such as call history or music using the Data Storage BOX (Cloud).
Settings Viewing the Settings menu 1 From the Home screen, [apps folder]u[Settings]. Network & internet Device connection Appearance Apps & notifications Battery Display Sound Call Storage Lock screen & security docomo service/cloud Accounts Xperia Assist Accessibility Google System P.168 P.179 P.180 P.180 P.184 P.185 P.188 P.104 P.190 P.191 P.200 P.201 P.202 P.203 P.204 P.205 Network & internet 1 From the Home screen, [apps folder]u[Settings]u[Network & internet].
Wi-Fi With Wi-Fi function, you can connect to an access point for your home, company network or public wireless LAN services to use mail and Internet. ■ Reception interference caused by Bluetooth devices Wireless LAN (IEEE802.11b/g/n) and the Bluetooth devices use the same frequency band (2.4GHz). If you use the terminal near Bluetooth devices, reception interference may occur or the communications speed may lower. Also, you may hear noise or have a connection problem.
❖Information Depending on your usage environment, the connection speed may be decreased, or Wi-Fi may not be available. ･ When the terminal is connected to Wi-Fi network successfully, "Connected" appears. If a different message is displayed, make sure of the password (security key). When the connection is not established even if you enter a correct password (security key), the correct IP address may not have been acquired. Check the signal status and reconnect.
Setting up Wi-Fi 1 From the Home screen, [apps folder]u[Settings]u[Network & internet]u[Wi-Fi]u[Wi-Fi preferences]. Turn on Wi-Fi automatically Open network notification Avoid poor connections* Auto-connect* Set whether to automatically turn on Wi-Fi when the terminal detects a saved high quality Wi-Fi network, and connect to it. Set whether to notify you when a high quality Wi-Fi open network is detected.
Mobile network 1 From the Home screen, [apps folder]u[Settings]u[Network & internet]u[Mobile network]. Mobile data Data roaming App data usage Enable VoLTE* Preferred network type* Carrier video calling* Automatically select network* Network* Access Point Names* P.172 P.222 Check mobile data usage of each application for the usage cycle which is specified in "App data usage cycle" (P.175). ･ To set restriction of background mobile data communication, etc.
■ 1 Checking the access point in use From the Home screen, [apps folder]u[Settings]u[Network & internet]u[Mobile network]u [Advanced]u[Access Point Names]. ･ ■ 1 2 3 4 5 6 The radio button on the right of current access point is marked. Setting an access point additionally From the Home screen, [apps folder]u[Settings]u[Network & internet]u[Mobile network]u [Advanced]u[Access Point Names]. . ･ ❖Information Do not change the MCC/MNC.
Data usage Check the data usage or make settings for mobile data communication. 1 From the Home screen, [apps folder]u[Settings]u[Network & internet]u[Data usage]. Amount of usage mobile data for the usage cycle which is specified in "App data usage cycle" (P.175) is displayed. Data saver P.174 Mobile data Enabling/Disabling mobile data communication (P.172). App data usage Check mobile data usage of each application for the usage cycle which is specified in "App data usage cycle" (P.175).
2 [Data warning & limit] App data usage cycle Set data warning Data warning Set data limit Data limit Set a usage cycle (measuring period) for amount of mobile data usage. Set whether to display the notification when the mobile data usage reaches to the set warning volume. Set a warning volume of mobile data usage. Set whether to temporarily suspend the mobile data communication when the mobile data usage reaches to the limit volume. Set a limit volume of mobile data usage.
❖Information If the portable hotspot starts while connecting to Wi-Fi network, Wi-Fi connection is disconnected. Wi-Fi network is automatically connected when the portable hotspot ends. ･ To connect a wireless LAN device via NFC, tap [Onetouch portable hotspot] in Step 2. ･ If you operate from [Portable hotspot] in Step 2u [Power save] to enable power saving, the portable hotspot will turn off automatically when the specified time has passed without connecting to wireless LAN devices.
❖Information System requirements (OS) for USB tethering are as follows. - Microsoft Windows 10 - Microsoft Windows 8.1 - Microsoft Windows 7 ･ In USB tethering, you cannot access your terminal's internal storage or microSD card from the PC. Airplane mode ･ Enabling Bluetooth tethering Up to 4 Bluetooth devices can be connected to the Internet. 1 2 From the Home screen, [apps folder]u[Settings]u[Network & internet]u[Hotspot & tethering]. of "Bluetooth tethering".
Connecting to a VPN (Virtual Private Network) Use Virtual Private Network (VPN) to connect to the information in a protected local network such as companies, schools or other facilities from outside. Connecting to a VPN 1 2 3 Adding a VPN 1 2 From the Home screen, [apps folder]u[Settings]u[Network & internet]u[Advanced]u[VPN]. . ･ When the note appears, follow the onscreen instructions to set unlocking method of screen lock or fingerprints (P.195, P.196).
Device connection 1 From the Home screen, [apps folder]u[Settings]u[Device connection]. Pair new device Previously connected devices Bluetooth*1 Received files*1 Cast*1 Screen mirroring*1*2 Media server*1 NFC / Osaifu-Keitai settings*1 P.212 P.213 Turn On/Off of Bluetooth device, or pair with a Bluetooth device. P.214 Display the terminal's screen on a device that supports Google Cast, etc. Connect to a TV or tablet compatible with Screen mirroring to display the screen on the terminal. P.218 P.
Appearance 1 Apps & notifications From the Home screen, [apps folder]u[Settings]u[Appearance]. Wallpaper Xperia Loops Grid size* Pane transitions* Widgets* Shortcuts* P.63, P.90 Set whether to notify you of charging, low battery level, the fingerprint authentication, etc. with an animation display like wave pattern. Set the grid size of Home screen (Xperia Home) or Application screen (P.64). Set the operation of page switch when swiping (flicking) the Home screen (Xperia Home) left or right (P.64).
Managing applications 1 From the Home screen, [apps folder]u[Settings]u[Apps & notifications]u[See all XX apps]. Tap u[Show system] to show all applications. ･ To select the displaying option, tap of "All apps" in the upper part of the screen. ･ 2 ❖Information ･ The displayed items may differ or the item may not be selected depending on application or usage condition. Force-quitting an application 1 ･ Tap an application.
❖Information ❖Information Some pre-installed applications may not be uninstalled. You can disable some applications or services which cannot be uninstalled (P.182). ･ Applications downloaded from Google Play are recommended to be uninstalled from the Google Play screen (P.147). ･ When in Step 3, u[UNINSTALL UPDATES] is displayed, tap it to restore the application to the default. ･ ･ Disabling application You can disable some applications or services, that cannot be uninstalled.
Configure notifications Set the notifications of each application or function. Also, you can change the operation of the notification LED or the setting of notifications for the lock screen. 1 From the Home screen, [apps folder]u[Settings]u[Apps & notifications]u[Configure notifications]. Show notifications Allow notification dots Use LED light to show incoming notifications Notification sound Set whether to show notification details on the lock screen.
Recently sent See all from last 7 days A list of applications whose notifications are recently displayed is displayed and you can set ON/OFF of each notification setting. A list of applications whose notifications are displayed for last 7 days is displayed and you can set ON/OFF of each notification setting. * Displayed items vary depending on the settings of "Screen lock" (P.195). Battery 1 From the Home screen, [apps folder]u[Settings]u[Battery].
Set whether to display battery level (%) on the status bar. Set whether to detect applications which consuming a lot of battery. Displays the elapsed time from the last full charge to the present time and the time used by the screen. Use since last full Displays applications or functions charge*2 which use the battery since the last full charge. Battery percentage*2 Adaptive Battery*2 Device usage*2 *1 The display may differ depending on usage condition. *2 Appeared when [Advanced] is tapped.
Video image enhancement* Enhance patterns and outlines when playing a video so that sharp images with detailed textures are produced. P.187 P.79 Side sense* One-handed mode* Cover selection* Set to correct the screen brightness or turn off the screen according to the cover (commercially available) you use. Glove mode* Increase touch sensitivity to enable touch operation with gloved hand. ･ Depending on the material of gloves, touch operation may be difficult.
Setting Side sense Sensor enabled Make settings for using Side sense feature (P.49). 1 2 From the Home screen, [apps folder]u[Settings]u[Display]u [Advanced]u[Side sense]. Tap . Side sense Select apps to Set applications to be menu be shown displayed in the Side sense menu. Show Side Set whether to display sense menu the Side sense menu on on lock the lock screen.
Sound 1 From the Home screen, [apps folder]u[Settings]u[Sound]. Audio settings Set whether to reproduce sound with the quality equivalent to highresolution audio when playing back compressed music files. It is available only when the highresolution audio headphones are connected to the terminal using the supplied 3.5mm Earphone jack conversion/TV Antenna cable SO01. ClearAudio+ The sound setting for music recommended by Sony.
Do not disturb Phone ringtone Notification sound Default alarm ringtone Dialpad tones* Screen locking sounds* Charging sounds* Touch sounds* Touch vibration* P.183 P.190 Set whether to emit sound when tapping the dialpad. Set whether to emit sound when pressing the power key to lock the screen, or unlocking the screen lock. Set whether to notify of start of charging with sound and vibration. Set whether to emit sound when selecting menu etc.
Setting the ringtone/ notification sound/alarm ringtone 1 From the Home screen, [apps folder]u[Settings]u[Sound]. 2 Tap any one of [Phone ringtone]/ [Notification sound]/[Default alarm ringtone]. 3 Select a sound optionu[OK]. ❖Information To set a ringtone other than ringtone, notification sound, or alarm ringtone stored by default, tap [Add ringtone] in Step 3. ･ A ringtone or notification sound selected in Step 3 sounds in the volume set in "Ring and notification volume".
❖Information To increase available memory of the internal storage by selecting files and applications to delete/uninstall them, tap [Internal shared storage]u[FREE UP SPACE]. ･ Tap [Internal shared storage]u[Files], or tap [USB drive]/[SD card] to display the data list. You can check the saved data or copy/move/delete/share the data (P.210). ･ To release the recognition of USB storage/microSD card, tap of "USB drive"/"SD card". To recognize again, tap [USB drive]/[SD card]u[MOUNT].
SIM card lock*2*3 P.194 The internal storage is encrypted by default. Show type of credential storage*4. Display trusted CA credentials. Manage the user credentials saved in the terminal. Install from Install certificates. device memory/SD card Clear Clear all certificates or credentials credential information stored in the credential storage.* 5 Trust agents*2 Set whether to enable trusted agents. Screen pinning*2 Set whether to enable screen pinning.
･ ■ The PUK code is written on the subscription form (copy for customer) handed at the subscription in the docomo Shop. If you subscribed other than docomo Shop, you must bring your official identification (such as driver's license), the docomo nano UIM card with you to the nearest docomo Shop or contact the "General Inquiries" on the last page.
■ PIN Unlock Key (PUK code) The PUK code is an 8-digit number for canceling the locked PIN code. The PUK code cannot be changed by yourself. ･ If you failed to enter PUK code 10 times consecutively, the docomo nano UIM card is locked. Please contact a docomo Shop. ■ ■ d ACCOUNT Enabling SIM card lock By entering PIN code when powered on, you can protect from improper use. 1 d ACCOUNT is an ID/password to use applications or services provided by DOCOMO.
Unlocking PIN lock 1 2 3 Enter the PUK codeu . Enter a new PIN codeu . Enter the PIN code againu 4 . Setting screen unlock method Set to enter the screen unlock method (pattern/PIN/password) when powering on the terminal or canceling the sleep mode. 1 2 3 From the Home screen, [apps folder]u[Settings]u[Lock screen & security]u[Screen lock]. Tap any one of [Pattern]/[PIN]/ [Password]. Follow the onscreen instructions to set. When the setting is complete, "Lock screen & security" menu screen reappears.
■ 1 To turn off the screen lock From the Home screen, [apps folder]u[Settings]u[Lock screen & security]u[Screen lock]uEnter the set unlock pattern/PIN/password u[None]u[YES, REMOVE]. ❖Information Entering incorrect pattern/PIN/password 5 times consecutively disables canceling the screen lock. Wait for approximately 30 seconds and then operate the canceling of screen lock again. ･ If you forget set pattern/PIN/Password, contact a docomo Shop.
- Dirty with mud, oil, or other contamination - Rough or injured (for example, cut or inflamed) - Extremely dry - Different in size than before, so that the fingerprint has changed - Worn so much that the fingerprint is unclear - Totally different in texture than when you registered your fingerprint ･ Fingerprint authentication technology does not guarantee completely accurate personal authentication or identification.
❖Information ･ On the fingerprint setting screen, you can perform the following actions: - To rename a fingerprint, tap a registered fingerprintuEnter a nameuTap [OK]. - To delete a fingerprint data, tap of registered fingerprintu[YES, REMOVE]. - To register the other fingerprint, tap [Add fingerprint]. Using your fingerprint for authentication 1 When the lock screen is displayed, touch the fingerprint sensor with the registered finger.
Show lockdown Display "Lockdown" option to the option*1 menu which is displayed when the power key is pressed for at least 1 second. You can disable unlock by Smart Lock or fingerprint authentication, or hide notifications by tapping "Lockdown". Add users from Set whether to add a guest or user lock screen from the Quick settings panel (P.60) on the lock screen when the unlocking method of the screen lock is "Pattern"/"PIN"/"Password".
docomo service/cloud 1 From the Home screen, [apps folder]u[Settings]u[docomo service/cloud]. Set up your d ACCOUNT to use docomo applications. You can also use your biological information (fingerprint) registered on the terminal to set up your d ACCOUNT. docomo cloud Make settings for docomo cloud compatible service. docomo Set whether to use the function of Application Data automatic back up/restore data of Backup docomo apps, or check the list of apps whose backup data stored.
Accounts 1 From the Home screen, [apps folder]u[Settings]u[Accounts]. Add account Automatically sync data P.201 P.202 Adding accounts Add or remove online service accounts. ･ Auto-sync data (P.202) ❖Information Google account can be registered as backup account by turning on the item of backing up data to your Google Drive on the "Google Services" screen when registering (P.205).
❖Information Xperia Assist You cannot remove the docomo account. ･ Setting auto-sync of accounts The information of online service can be synchronized with the terminal automatically. You can display and edit information on the terminal or a PC. ･ Setting Auto-sync data, communication occurs to synchronize and a packet communication charge may be applied. 1 From the Home screen, [apps folder]u[Settings]u[Accounts]. 2 / of "Automatically sync data"u[OK].
Accessibility 1 From the Home screen, [apps folder]u[Settings]u[Accessibility]. Volume key shortcut Osusume hint Text-to-speech output Font size Display size Set whether to enable activation of accessibility function using the volume key shortcut, or set shortcut services to be activated. Set whether to use Osusume hint service. ･ Use setting is required in advance (P.200). P.204 Set font size. Enlarge/reduce of the size of the icon etc. displayed in the screen.
Setting Text-to-speech output 1 From the Home screen, [apps folder]u[Settings]u[Accessibility] u[Text-to-speech output]. Preferred engine Language Speech rate Pitch PLAY RESET Select and set the engine for Text-tospeech output. Set language for Text-to-speech output. Set speed at reading out text. Set the pitch of voice to read out text. Playback reading sample. Reset setting of "Speech rate" and "Pitch" to the default.
System 1 From the Home screen, [apps folder]u[Settings]u[System]. P.205 P.206 Set an application/ function to be activated by pressing the power key twice. Date & time P.207 Backup*1 Back up to Set whether to back up Google Drive data of applications, settings of the terminal, etc. to Google Drive. Account*2 Set an account for backup to Google Drive. ･ When the account is set, items of backup contents appear and you can set autorestoration, etc. Reset Reset Reset the network options*1 network settings.
SIM status Model IMEI Show IMEI barcode Android version Battery life IP address Wi-Fi MAC address Bluetooth address Build number Check the version, various numbers, status of docomo nano UIM card, battery life, etc. Languages & input 1 From the Home screen, [apps folder]u[Settings]u[System]u [Languages & input]. Languages On-screen SwiftKey keyboard Keyboard Physical keyboard P.207 Make settings of SwiftKey Keyboard. This item is displayed when the language is set to English. P.
Spell checker*1*2 Autofill service*1 Personal dictionary*1 Pointer speed*1 Text-to-speech output*1 Set whether to run the spell checker. Select autofill services or make the settings. Add words used in the spell checker and other applications. Set pointer speed when a mouse or trackpad is used. P.204 *1 Appeared when [Advanced] is tapped. *2 Downloading a spell checker application is required.
Resetting the terminal Resetting the terminal deletes all data and accounts, and resets the terminal back to the initial (default) state. ･ The downloaded applications and data in the internal storage (music, images, etc.) are included to the data to be deleted. ･ Make sure to back up the important data you have on the terminal before resetting. ･ Reset the terminal while charging the battery, or when the battery is sufficiently charged. ･ Initial settings (P.47).
Multiple users Add users to share the terminal with multiple users (function that allows users and guests to use the terminal). To switch users, etc. operate from the Quick settings panel (P.60). 1 From the Home screen, [apps folder]u[Settings]u[System]u [Advanced]u[Multiple users]. You (Owner)* Guest Add user Check or edit profile information. Tap this item to add a guest or switch to the guest when the owner uses the terminal. Also, set whether to allow a guest to use the phone by tapping .
File management microSD card (External storage) Storage structure Phone (Internal shared storage) Folders in the internal storage (/storage/ emulated/0) by default are as follows. ･ Displayed folders may differ depending on the terminal operations. Alarms Android DCIM Download Movies Music Notifications Pictures Podcasts Ringtones Stores alarm sounds etc. Stores setting data for system or each application, temporary files, etc. Stores still pictures/videos shot by Camera.
■ 1 2 3 4 ■ 1 2 3 4 Creating a folder From the Home screen, [apps folder]u[File manager]. Tap the folder as required. u[New folder]. Enter a folder nameu[OK]. ■ 1 2 3 4 Renaming a folder or file From the Home screen, [apps folder]u[File manager]. Tap the folder as required. Touch and hold a folder or file you want to rename. u[Rename]uEnter a nameu [OK]. ■ 1 2 3 4 5 Deleting a folder or file From the Home screen, [apps folder]u[File manager]. Tap the folder as required.
･ Data communication Bluetooth function Bluetooth function is a technology which enables to connect with Bluetooth device such as PC, handsfree headset wirelessly. ･ The terminal does not connect wirelessly with all types of Bluetooth devices. ･ Supported Bluetooth profiles (P.247) ❖Information On/OFF setting of the Bluetooth function is kept even if you turn off the power. ･ When you do not use Bluetooth function, turn it off to save the battery.
1 From the Home screen, [apps folder]u[Settings]u[Device connection]u[Pair new device]. ･ 2 3 Tap a name of Bluetooth device for pairing. Confirm the Bluetooth pairing code (pass code) on the confirmation screenu[PAIR]. ･ ■ Detected Bluetooth device names are displayed in "Available devices". Paired Bluetooth device names are displayed in "Currently connected".
Sending/Receiving data via Bluetooth function Turn on Bluetooth function in advance, then pair with a target Bluetooth device. NFC communication You can send/receive data to/from a device with NFC such as a mobile phone. Sending data via Bluetooth function 1 [Bluetooth] from the sharing menu of each application. 2 Tap the other Bluetooth device. Receiving data 1 Send data from the other Bluetooth device. ･ 2 appears on the status bar. Drag the status bar downwards u[Incoming file]u[ACCEPT].
Even if mark is placed face to face, sending/receiving may fail. In such case, operate again to send/receive. ･ The terminal does not communicate with all NFC devices. ･ For notes when holding over the other device (P.149). ･ Enabling NFC Reader/Writer, P2P function 1 2 Sending/Receiving data by one-touch function By using the Android Beam with a NFC compatible Android device, you can send or receive images, music, photos or videos taken with the terminal with simple operations.
Receiving data 1 Perform data sending operation on a sender's terminal. 2 Place marks face to face with the terminal for sending. ･ When the data is received, the application which corresponds to the data activates. When data such as still image or video, or music is received, may appear on the status bar. Drag the status bar downwardsuTap [Beam complete] to launch the application associated with the received data. Follow the onscreen instructions.
External device connection Connecting to PC 1 Connect to a PC to exchange data between the internal storage or the microSD card and a PC. When a screen for installing driver software appears, wait for a while until the installation is complete. ･ When the confirmation screen of installing software appears on the terminal, tap [SKIP] or [CANCEL]. ･ ❖Information Appeared screen may vary depending on the operating system (OS) of a PC.
Removing USB cable A to C safely ･ 3 Do not remove the USB cable A to C during while transferring data. Data may be damaged. 1 Confirm that it is not transferring data, remove the USB cable A to C from the terminal and a PC. ･ 4 5 Access request for media server is notified to the terminal. On the Media server settings screen of the terminal, tap the pending DLNA deviceuSet the access level.
Connecting earphones or headphones To output audio sound from commercially available headphones or earphones, connect them to the supplied 3.5mm Earphone jack conversion/TV Antenna cable SO01. ･ When connecting headphones or earphones, insert them firmly, straight into the headset jack of 3.5mm Earphone jack conversion/TV Antenna cable SO01. 1 Insert a connecting plug of commercially available headphones or earphones into the headset jack of 3.5mm Earphone jack conversion/TV Antenna cable SO01.
International roaming Overview of International roaming (WORLD WING) With the international roaming (WORLD WING), you can use the terminal without changing phone number or mail address in the service area of the overseas network operator affiliated with DOCOMO. You do not need to change the settings of call and SMS. For details of International Roaming Service (WORLD WING), refer to NTT DOCOMO website. https://www.nttdocomo.co.
Before using overseas Advance preparation Network service settings Before leaving Japan To use the terminal overseas, check the following in Japan. ■ Subscription ･ ■ Charging ･ ■ Check if you subscribe WORLD WING. For details, contact "General Inquiries" on the last page. For charging, refer to NTT DOCOMO website. Usage charge Overseas usage charges (call and packet communication) differ from those in Japan. For details, refer to NTT DOCOMO website.
After arriving overseas When you arrive overseas and turn on the terminal, the terminal connects an available network automatically. Connectivity When "Automatically select network" (P.222) is set to ON, the most suitable network will be selected automatically. Setting network By default, the terminal automatically searches available network and connect to it. To switch network manually, set as follows.
Setting the preferred network type 1 From the Home screen, [apps folder]u[Settings]u[Network & internet]. 2 [Mobile network]u[Advanced]u [Preferred network type]. 3 Tap any one of [4G (preferred)/3G/ GSM]/[4G/3G]/[3G (preferred)/ GSM]/[GSM only]. ･ Select "4G (preferred)/3G/GSM" to switch available network type automatically. Using VoLTE during international roaming Set to enable VoLTE when VoLTE is available during international roaming.
Making/Receiving a call in the country you stay When you arrive overseas and turn on the terminal, an available network is automatically set. ･ Check that the battery and signal levels are high enough. ･ Depending on the network operator, even if the Caller ID notification is active, the caller ID may not be notified or appear properly. In this case, calls cannot be made from the call log. u If the area code (city code) begins with "0", omit "0".
3 4 . ･ Making a call to WORLD WING user overseas When the International dial assist screen is displayed, tap [CALL]. When the call is finished, When the other party uses international roaming service, make a call as an international call to Japan even when you stay in the same country as the other party. . Making a call within the country you stay You can make a call by entering the phone number of the other party's land-line phone or mobile phone in the same way you do in Japan.
Making a call from the other party ■ To have the other party make a call from a land-line phone or mobile phone in Japan to the terminal in the country you stay, the other party only needs to dial the phone number as in Japan.
Setting International dialing assist 1 2 From the Home screen, u . [Settings]u[Calls]u[Roaming settings]. 3 [International dial assist]. Auto Add international prefix or country conversion code automatically. Country code Select a country code used for auto conversion. International Select an international prefix used for prefix auto conversion. Setting Network service (overseas) Set network service such as voice mail from overseas. ･ You need to set "Remote operation settings" (P.
After returning to Japan After returning to Japan, restore to the settings which are made before you traveled. ■ When using packet communication overseas Turn off "Data roaming" (P.222). ■ If you cannot connect to DOCOMO network automatically after returning to Japan Set "Preferred network type" (P.223) to "4G (preferred)/3G/GSM". ･ Turn on "Automatically select network" (P.222).
* Note that some data and settings may be erased due to force-quit operation. Appendix/Index Troubleshooting ■ Troubleshooting When you have a vague idea of malfunctioning, you can perform diagnosis by yourself. For details, refer to NTT DOCOMO website. https://www.nttdocomo.co.jp/support/ trouble/repair/ (in Japanese only) ･ Check if the software update is necessary for the terminal. If necessary, perform the software update (P.243, P.246).
Battery Care charging does not start. ･ Battery Care charging cannot start when learning is not complete because regularity in your charging habit has not been found. → P.39 Cannot charge fully. ･ If you remove charging equipment during Battery Care charging, the terminal may not be fully charged. To charge fully, from the Home screen, tap [apps folder]u[Settings]u[Battery]u [Battery Care]u of "Use Battery Care" to turn off Battery Care and then switch to normal charge. → P.
When the Wi-Fi function or Bluetooth function is not used, turn off the setting. → P.169 , P.212 ･ When STAMINA mode is set, the operations and a part of functions of the terminal are restricted so that the consumption of the battery power can be reduced. → P.184 Operations are not possible when tapping or pressing keys. ･ Check if the power is turned off. → P.45 ･ Check if you activate the screen lock. → P.
* Back up necessary data before using safe mode. * Some applications or widgets may not be shown. * Safe mode is not a normal booting state. To use ordinarily, exit the safe mode. Applications cannot be operated properly (applications cannot be activated, or errors occur frequently). ･ Are there any applications being disabled? Enable disabled applications, then retry. → P.182 ･ Are the permissions for the application granted? → P.54, P.181 ■ Phone call Cannot make a call even if you tap .
■ Display The display is dim. ･ Check if "Sleep" is set in short time period. → P.185 ･ Check if the brightness of screen is changed. → P.186 ･ When "Adaptive brightness" is ON, screen brightness is changed according to the ambient brightness. → P.185 ･ Check if you cover the Proximity/Light sensor with a sticker etc. → P.31 ･ When the temperature of the terminal becomes high while using, the display may become darker. It is not abnormal. ■ Mail Mail is not received automatically.
■ International roaming Cannot use the terminal overseas (when is displayed). ･ Do you subscribe to WORLD WING? Check if you subscribe to WORLD WING. Cannot use the terminal overseas (when is displayed). ･ Check if you are out of the international roaming service area or in an area with poor signal strength. Check if the service area and network operator are available or not, refer to NTT DOCOMO website. ･ Change the network settings or overseas network operator settings.
■ Data management Data transfer is not performed. ･ Check if USB hub is used. If you use USB hub, operations may not be performed correctly. Data saved in microSD card is not displayed. ･ Remove and attach the microSD card. → P.35 " "/"u" appears when displaying images or images are not displayed correctly. ･ When image data is destroyed, " "/"u" may appear or no image may appear. ■ Bluetooth function The terminal cannot be connected to a Bluetooth device/A Bluetooth device cannot be found by search.
Cannot hear sound from connected headphones or earphones. ･ Check the procedures for connecting them with the supplied 3.5mm Earphone jack conversion/TV Antenna cable SO01. → P.219. ■ Map/GPS Cannot set AUTO-GPS service information. ･ Check if the battery level is low and AUTOGPS function stops. If AUTO-GPS stops due to "Low-power operation settings", AUTO-GPS service information cannot be set. In this case, set "Low-power operation settings" to "Not suspend" or charge the battery.→ P.38 , P.
● Call not sent ● PIN lock disable code is locked. This appears when making a voice call or video call is not available. During a video call, making a voice call to another party is not available. Also, if the other party's phone is not compatible with video call, or during a voice call, making a video call is not available. ● Normal calls restricted by access control. Appears when normal voice call service is hard to receive because communication lines are busy. ● Calls restricted by access control.
あんしん遠隔サポート (Anshin Enkaku Support) By sharing screens of your terminal with an operator of Anshin Enkaku Support center, you can receive technical support to make settings, use applications, or connect peripheral devices such as PC. (in Japanese only) ･ This service is not available when your docomo nano UIM card is not inserted, during international roaming, or in Airplane mode. ･ Anshin Enkaku Support is a paid service requiring subscription. ･ Some operations and settings are not supported.
Checking in Q & A site 1 From the Home screen, [apps folder]u[ 遠隔サポート (Enkaku support)]. 2 [Q&A サイト／アプリで調べる (Q&A site/check with app)]. Inquiring via LINE 1 From the Home screen, [apps folder]u[ 遠隔サポート (Enkaku support)]. 2 [LINE で問い合わせる (Inquire via LINE)]. Warranty and After Sales Services Warranty The terminal comes with a year's warranty starting from the date of purchase. ･ 3.5mm Earphone jack conversion/TV Antenna cable SO01 is not covered by the cost-free repair warranty.
Free repair service provisions a In case the product has a malfunction under normal-use conditions in line with the directions given in the instruction manual etc., it will be repaired free of charge on the condition that the warranty period has not expired. (In some cases, the product may be replaced with the substitute.) b Even if the warranty period has not expired, a fee will be charged for repair under the following circumstances. 1.
After Sales Services If you have problems with the terminal Before asking repair, see "Troubleshooting" (P.229) in this manual to check the problem. If the problem still persists, contact "Repairs (Inquiries/Request)" on the last page (in Japanese only). If repair is required resultingly Bring the terminal to the DOCOMO-specified repair office. However, it must be taken during business hours of the repair office. Note that repair may take some days depending on the problem.
● Do not remove the nameplate attached to the terminal. ･ Note that if the content of the nameplate cannot be confirmed due to deliberate removal, replacement, etc., it may disqualify the terminal from repairs. ● Note that the settings and other information may be reset (cleared) as a result of malfunction, repair or other handling. In this case, make the settings again. In that case, packet communication charge may incur depending on the settings.
Software Update Software Update Software update is a function which updates the software so as to use the terminal safer and more comfortable. The followings are included. Be sure to update the software to the latest one. There are the following 4 types' updates for Software update. ･ Android OS version upgrade Upgrade Android OS and the version of the pre-installed applications to improve the function/operability/quality resulting in using the terminal more comfortable and safer.
Terms of use When using packet communication via Xi/ FOMA, set the access point for Mobile network to sp モード (sp-mode) or mopera. ･ For using packet communication via Xi/ FOMA, communication charge is not applied for downloading. ･ To execute the software update overseas, WiFi connection without docomo nano UIM card insertion is required. ･ When the software is modified, update is not available.
Flow of updating 2 Restart. 3 Notification of update completion. Updating can be executed as follows. For detail operation steps, follow the onscreen instructions on the terminal. 1 Download an update file and install. Depending on update type, downloading an update file and installing will be executed automatically. ･ The confirmation of "PERFORM NOW" and "LATER" may appear before downloading and installing the update file.
Notes Once the software update is complete, you cannot restore the previous software. ･ While the software is updating, the unique information of the terminal (model, serial number, etc.) is sent to the server of DOCOMO. DOCOMO does not use the sent information for purposes except software update. ･ While the software is updating, each function may not be available temporarily. ･ By executing software update, some settings may be initialized. Make the settings again.
Main specification Changes may occur because of software update, etc. For the latest information, refer to NTT DOCOMO website. ■ The terminal SO-XXX Hight : Approx. 158 mm, Width : Approx. 73 mm, Thickness : Approx. 9.9 mm Weight Approx. 193 g Display Type Organic EL (Triluminos® Display for Mobile) Size Approx. 6.0 inches Colors 16,777,216 colors Resolution 1,440 pixels (H)u2,880 pixels (V) (QHD+) Internal memory ROM : 64GB*1 RAM : 4GB Internal Battery Lithium Ion Battery battery type Voltage DC3.
Image pickup device Type Size Camera effective pixels Camera recorded pixels (Max.) Recording Video file format Still image Zoom Video (digital) Still image Video shooting time Camera : Backsideillumination layered CMOS Front camera : Backsideillumination layered CMOS Camera : 1/2.3 inches Front camera : 1/3.06 inches Camera : Approx. 19.2 million pixels Front camera : Approx. 13.2 million pixels Camera : Approx. 19.2 million pixels Front camera : Approx. 13.
*6 It supports MIMO. *7 It supports MU-MIMO (client). *8 It is confirmed that the terminal and all Bluetooth devices are compliant with Bluetooth standards designated by Bluetooth SIG, and they are authenticated. However, procedures may differ or data transfer may not be possible depending on the Bluetooth device's characteristics or specifications. *9 May vary by the signal status and/or whether there is an interference between communication devices.
■ Display language Malaysian/Bosanski jezik/Catalan language/ Czech/Danish/German/Estonian/English/ Spanish/Filipino/French/Croatian/ Indonesian/Icelandic/Italian/Latvian/ Lithuanian/Hungarian/Dutch/Norwegian (language for books)/Polish/Portuguese/ Romanian/Albanian/Slovakian/Slovenian/ Serbian/Finnish/Swedish/Vietnamese/ Turkish/Greek/Bulgarian/Kazakh language/ Macedonian language/Russian/Ukrainian language/Hebrew/Arabic/Persian (Dari language)/Marathi/Hindi/Bengali/Tamil/ Telugu/Kannada/Malayalam/Thai/Ko
Kannada/Kashmiri (India)/Kashubian language/Kazakh language/Khasi/Khmer/ Khoekhoe language/Kikuyu/Gilbertese language/Konkani (devanagari)/Konkani (Kannada)/Korean/Kurdish (Kurmanji)/ Kurdish (Central)/Kyrgyz language/Lao language/Latgalian language/Latvian/ Limburgish language/Lingala/Lisu language/Lithuanian/Low German/ Dolnoserbski/Luxembourgish language/ Macedonian language/Maithili language/ Makhuwa language/Malagasy/Malaysian/ Malayalam/Maltese/Meithei language/ Manx/Maori language/Maranao language/ M
Certificate and compliance You can check details of certificate and compliance mark specific to the terminal (including certificate number/compliance number). 1 From the Home screen, [apps folder]u[Settings]u[System]. 2 [About phone]u[Certificates]. ■ VCCI The terminal complies with a technical standards based on VCCI RULES FOR VOLUNTARY CONTROL MEASURES and the mark of conformity is depicted electronically on the screen.
Sony Mobile and its third party suppliers and licensors retain all rights, title and interest in and to the Software. To the extent that the Software contains material or code of a third party, such third parties shall be beneficiaries of these terms. This license is governed by the laws of Japan. When applicable, the foregoing applies to statutory consumer rights.
Intellectual Property Right About the Copyright and Portrait rights Copyrighted contents you recorded or obtained from sites or Internet home pages using this product by downloading or other means, such as documents, images, music data, software, are prohibited from reproduction, transformation and transmission over public lines without consent of the copyright holders, unless intended for personal use or any other purpose permitted by law.
"Catch Phone (Call waiting service)" is a registered trademark of Nippon Telegraph and Telephone Corporation. ･ Xperia is a trademark or registered trademark of Sony Mobile Communications Inc. ･ PlayStation and DUALSHOCK are trademarks or registered trademarks or Sony Interactive Entertainment Inc. ･ Sony, FeliCa, Reader, Triluminos and STAMINA, and the Video & TV SideView logo are trademarks or registered trademarks of Sony Corporation.
"Microsoft", "Windows", "Microsoft Excel", "Microsoft PowerPoint" and "Microsoft Exchange ActiveSync" are trademarks or registered trademarks of Microsoft Corporation in the United States and other countries. ･ "Microsoft Word" is a product name of Microsoft Corporation in the United States. ･ This product contains technology subject to certain intellectual property rights of Microsoft.
SIM unlock This terminal supports SIM unlock. If you release SIM lock, you can use SIM by a carrier other than NTT DOCOMO. ･ Available services and functions may be limited. DOCOMO is not liable to any failures or malfunctions. ･ For details of SIM unlock procedure, refer to NTT DOCOMO website. 1 2 3 Insert SIM card provided by other company. Power on the terminal. Enter the SIM unlock codeu [UNLOCK].
Index A About phone ････････････････････････ 205 Access point Initializing ･････････････････････････ 173 Setting････････････････････････････ 172 Accessibility ･････････････････････････ 203 Accounts ････････････････････････････ 201 Add account ･････････････････････････ 201 Adjusting sound volume ･･･････････････ 189 Airplane mode ･･･････････････････････ 177 Alarm ･･･････････････････････････････ 163 Alarm ringtone ･･･････････････････････ 190 Alarm volume ････････････････････････ 189 Album ･････････････････････
C Calculator ････････････････････････････ 71 Calendar ･････････････････････････････ 70 Call･･････････････････････････････････ 94 Answering with Answering Machine ････ 97 Audio output ･･････････････････････ 100 Calling screen ･･･････････････････････ 99 Declining a call ･･････････････････････ 98 Ending ･････････････････････････････ 99 Hold call ･･････････････････････････ 100 Making a call ････････････････････････ 94 Mute ･･････････････････････････････ 99 Receiving ･･････････････････････････ 97 Speaker ･･･････
d POINT ･･････････････････････････････ 73 Data Storage BOX ･･････････････････････ 70 Data usage ･･････････････････････････ 174 Date & time ･･････････････････････････ 207 Device connection ････････････････････ 179 Disaster kit ･･･････････････････････････ 70 Display･･････････････････････････････ 185 dmarket･････････････････････････････ 146 dmenu ･･････････････････････････････ 146 docomo Data Copy････････････････････ 165 docomo mail ･････････････････････････ 114 docomo nano UIM card ･････････････････ 32 Precau
GPS Activate ･･･････････････････････････ 160 GPS function ･････････････････････････ 159 H Hanashite Hon'yaku ････････････････････ Home app Simple Home ･･･････････････････････ Home application docomo ････････････････････････････ Switching ･･････････････････････････ Xperia ･････････････････････････････ Home screen ･･････････････････････････ Adding (docomo LIVE UX) ･････････････ Adding (Xperia Home) ････････････････ Backup ････････････････････････････ Deleting (docomo LIVE UX) ････････････ Deleting (Xperia Ho
Memo ･･･････････････････････････････ 72 Messenger ･･･････････････････････････ 74 MHXR ･･･････････････････････････････ 74 microSD card ･････････････････････････ 35 Formatting ････････････････････････ 191 Unmounting ･･･････････････････････ 191 Missed call･･･････････････････････････ 102 Mobile network ･･････････････････････ 172 Moji-Henshu ･･････････････････････････ 86 Movie Creator ･････････････････････････ 74 Multiple users ････････････････････････ 209 Multi-tap input ････････････････････････ 84 Music ･･････
Share ･････････････････････････････ 111 Sharing ･･･････････････････････････ 113 Photos ･･･････････････････････････････ 71 PIN code ････････････････････････････ 193 PIN Unlock Key (PUK code) ･････････････ 194 Play Movies & TV･･･････････････････････ 74 Play Music ････････････････････････････ 74 Play Store ･･･････････････････････････ 147 Installing ･･････････････････････････ 147 Uninstalling････････････････････････ 147 Playing video ････････････････････････ 144 Portrait view ･･････････････････････････ 52 Power
Storage ･････････････････････････････ 190 External storage ･････････････････････ 35 Internal shared storage ･･････････････ 210 Suguden Suguden setting ････････････････････ 105 System･･････････････････････････････ 205 T Take screenshot ･･･････････････････････ 53 Task manager ･････････････････････････ 77 Tethering ････････････････････････････ 175 Bluetooth tethering ･････････････････ 177 Portable hotspot････････････････････ 175 USB tethering ･･････････････････････ 176 Text editing ･･･････････････････････････
World clock ･･････････････････････････ 164 WORLD WING ････････････････････････ 220 X Xperia Assist ･････････････････････････ 202 Xperia Japanese keyboard ･･･････････････ 86 Online help ･････････････････････････ 80 Xperia Lounge Japan ･･･････････････････ 74 Y YouTube ･････････････････････････････ 74 Symbols +Message Deleting a message ･････････････････ 118 Receiving ･････････････････････････ 118 Setting････････････････････････････ 119 Numerics 1Seg ･･･････････････････････････････ 152 3D Creator ･････････
Check usage charge, usage status, subscription information, or make various application online The terminal: d メニュー (dmenu) u [My docomo（お客様サポート）(My docomo (Customer support))] PC: My docomo (https://www.nttdocomo.co.jp/mydocomo/ ) (in Japanese only) * There are cases where the site may not be available due to system maintenance, etc. * To use "My docomo", "Network security code" and "ID/password of d ACCOUNT" are required. Don't forget your mobile phone ...
General Inquiries 0120-005-250 (toll free) Repairs (Inquiries/Request) ■From DOCOMO mobile phones (In Japanese only) (No prefix) 113 (toll free) *Service available in: English, Portuguese, Chinese, Spanish. *Unavailable from part of IP phones. (Business hours: 9:00 a.m. to 8:00 p.m.) *Unavailable from land-line phones, etc.
