VCR Operating Instructions DSR-85, 85P

Chapter 4 Menu Settings 53
Chapter 4 Menu Settings
Changing the Settings of
Enhanced Items
To change the settings of enhanced items, first carry
out the procedure in the previous section “Displaying
Enhanced Items”, then proceed as follows.
1 Press the MENU button on the menu control panel.
The menu selection level display appears on the
monitor.
2 Press the ÷ button.
This displays all basic and enhanced items in the
menu level 1.
Level-1 menu display
Menu grade
SETUP MENU
OPERATIONAL FUNCTION
DISPLAY CONTROL
TIME CODE
TAPE PROTECTION
VIDEO CONTROL
AUDIO CONTROL
MENU GRADE







•ENHAN
3 Follow the same procedure as in steps 3 to 8 of the
procedure in the section “Changing the Settings of
Basic Items”, using the arrow buttons to select an
item and change its setting.
On-screen indication Meaning
Right-pointing arrow at the
right of a menu item
(See
step 1 on page 51.)
Pressing the ÷ button
switches to the next lower
menu level or to a setting
selection screen.
Left-pointing arrow at the
left of a menu item
(See
step 4 on page 52.)
Pressing the ¿ button returns
to the previous (higher) menu
level.
Character string at the
right of a menu item
(See
step 4 on page 52.)
Current setting of the menu
item.
When shown with a colon: the
current setting is the same
as the factory default.
When shown with a raised dot:
the current setting is
different from the factory
default.
(See step 2 on this
page.)
An asterisk by a complete
list of settings
(See step 6
on page 52.)
Factory default setting.
Monitor screen
Time counter display
Current settings
(Continued)
Meanings of indications on the monitor
screen
Displaying Enhanced Items
The factory default setting is not to display enhanced
items.
To display enhanced items, use the procedure in the
previous section, “Changing the Settings of Basic
Items”, to set the item “MENU GRADE” to
“ENHANCED”. (In step
3 on page 51 select “MENU
GRADE”, and select “ENHANCED”, then press the
SET (YES) button to save the setting in memory).
Once the menu item “MENU GRADE” is set to
“ENHANCED”, when you press the MENU button
and the ÷ button to display the SETUP menu, all
basic and enhanced items in the menu level 1 appear.
2
1
3
4
SYNC PHASE SC PHASE MENU
MONITOR SELECT
RESET(NO)
SET(YES)
CH-
1/2
CH-
3/4
CH-
1/3
CH-
2/4
MIX
TC PRESET