VCR Operating Instructions DSR-85, 85P

54 Chapter 4 Menu Settings
Chapter 4 Menu Settings
Changing Menu Settings
Monitor screen message “INITIALIZE ALL ITEMS TO
FACTORY PRESET
VALUES?”
Message in the time
counter display
“Init setup?”
4 When you have completed the settings, press the
SET (YES) button.
The message “NOW SAVING...” appears on the
monitor screen, and “Saving...” appears in the time
counter display, while the new settings are saved in
the unit’s memory.
When the saving operation is completed, the
monitor screen and time counter display return to
their normal indications.
Returning Menu Settings to Their
Factory Defaults
After making menu setting changes, to return settings
to their factory defaults, use the following procedure.
To return a particular setting to its factory
default
In the display for changing the setting in question,
press the RESET (NO) button.
Carry out the procedure in the section “Changing the
Settings of Basic Items” (page 51) up to step 6, then
with the list of the setting displayed (in the example, if
the setting has been changed it will be “66%” or
“33%”) press the RESET (NO) button, to return the
setting to its factory default of “100%”.
To return all settings to their factory
defaults
1 Press the MENU button on the menu control panel,
to display the menu selection.
2 Press the ÷ button, to display level 1 of the setup
menu.
3 Press the RESET (NO) button.
A message appears, to confirm whether or not you
wish to return all settings to their factory defaults.
4 Press the SET (YES) button.
The message “NOW SAVING...” appears on the
monitor screen, and “Saving...” appears in the time
counter display, while the settings of all items are
returned to their factory defaults, and these factory
defaults are saved in the unit’s memory.
Note
If you power off the unit while settings are being
saved, settings may not be correctly returned to
their factory defaults. Wait until the saving is
completed before powering off the unit.
To abandon the resetting operation
Instead of pressing the SET (YES) button, press the
RESET (NO) button. The display returns to menu level
1, leaving the settings unchanged.