VCR Operating Instructions DSR-85, 85P

Location and Function of Parts
Chapter 1 Overview
8 Chapter 1 Overview
)
0
6
r
p
Front Panel
3 POWER switch
Press on the “1” side to power on the unit. This causes
the audio level meter and time counter display to light.
Press on the “¬” side to power off the unit.
4 HEADPHONES control knob
Controls the volume of the headphones connected to
the HEADPHONES connector.
5 HEADPHONES connector (stereo phone jack)
Connect stereo headphones for headphone monitoring
during recording or playback.
The audio signal you want to monitor can be selected
with the MONITOR SELECT switches on 4 menu
control panel.
6 CONTROL S connector (stereo minijack)
Connect a SIRCS-system remote controller such as the
DSRM-10.
Location and Function of Parts
1 Cassette compartment
Accepts standard-size or mini-size DVCAM digital
videocassettes. When using a mini-size cassette, insert
it into the middle of the compartment.
For details of usable cassettes, see page 22.
2 REMOTE/LOCAL switch
Selects whether the unit is operated from its front
panel or from external (remote) equipment.
REMOTE : The unit is operated from an editing
controller connected to the REMOTE connector
on the rear panel.
LOCAL : The unit is operated from its front panel or
from a SIRCS-system remote controller connected
to the CONTROL S connector on the front panel.
1 Display section (A) and
video/audio input setting
section (see page 9)
2 Display section (B) and
COUNTER SELECT button
(see page 11)
3 Tape transport control
section (see page 12)
4 Menu control panel
(inside of the door)
(see page 13)
1 Cassette compartment
4 HEADPHONES control knob
2 REMOTE/LOCAL switch
5 HEADPHONES connector
6 CONTROL S connector
3 POWER switch