User manual
Table Of Contents
- Preparing the camera
- Mastering the basic operation
- Using the recording functions
- Zooming
- Setting the function using [Photo Creativity]
- Adjusting the brightness of still images (Exposure compensation)
- Using the self-timer
- Shooting still images continuously
- Changing the screen display (DISP)
- Changing the ISO sensitivity
- Shooting with various shooting modes
- Selecting the flash mode
- Selecting the image size/record setting
- Checking the functions available
- Viewing images on a computer
- Others
GB
11
Preparing the camera
A Connection plate cover
Use this when using an AC-PW20
AC Adaptor (sold separately).
Insert the connection plate into the
battery compartment, and then pass
the cord through the connection
plate cover as shown below.
• Make sure that the cord is not
pinched when you close the
cover.
B Tripod socket hole
• Use a tripod with a screw length
of less than 5.5 mm
(7/32 inch). You will be unable to
firmly secure the camera to
tripods using screws longer than
5.5 mm (7/32 inch), and may
damage the camera.
C Speaker
D Battery cover (13)
E Battery compartment (13)
F Lock lever (13, 17)