User manual
Table Of Contents
- Preparing the camera
- Mastering the basic operation
- Using the recording functions
- Zooming
- Setting the function using [Photo Creativity]
- Adjusting the brightness of still images (Exposure compensation)
- Using the self-timer
- Shooting still images continuously
- Changing the screen display (DISP)
- Changing the ISO sensitivity
- Shooting with various shooting modes
- Selecting the flash mode
- Selecting the image size/record setting
- Checking the functions available
- Viewing images on a computer
- Others
GB
18
Preparing the camera
Attaching/removing the lens
Set the power switch of the camera to OFF before you attach or remove the
lens.
• When attaching a lens, do not press the lens release button.
• Do not use excessive force when attaching a lens.
• The Mount Adaptor (sold separately) is required to use an A-mount lens (sold
separately). For details, refer to the operating manual supplied with the Mount
Adaptor.
• When using a lens equipped with a tripod socket, attach the socket on the lens side
to the tripod to maintain balance.
1
If the cap or the packaging lid
is attached, remove it from the
camera or the lens.
• Quickly change the lens somewhere
away from dusty locations so as to
prevent dust or debris from entering
the camera.
2
Mount the lens by aligning the
white index marks on the lens
and the camera.
• Hold the camera’s face downward
to prevent the dust from entering
into the camera.
3
While pushing the lens lightly
toward the camera, turn the
lens clockwise until it clicks
into the locked position.
• Be sure to put the lens on straight.
Notes