User manual
Table Of Contents
- Preparing the camera
- Mastering the basic operation
- Using the recording functions
- Zooming
- Setting the function using [Photo Creativity]
- Adjusting the brightness of still images (Exposure compensation)
- Using the self-timer
- Shooting still images continuously
- Changing the screen display (DISP)
- Changing the ISO sensitivity
- Shooting with various shooting modes
- Selecting the flash mode
- Selecting the image size/record setting
- Checking the functions available
- Viewing images on a computer
- Others
GB
27
Mastering the basic operation
Recording movies
• The sound of the camera and the lens in operation might be recorded while
recording a movie.
• When you use a lens with a power zoom and find the sound of the zooming ring
during recording distracting, it is recommended that you use the zooming lever.
When you move the zooming lever, place your finger lightly on the lever and
operate so that you do not flip the lever.
• You can disable the sound recording by selecting MENU t [Setup] t [Movie
Audio Rec] t [Off] (page 55).
• The continuous recording time of a movie depends on the ambient temperature or
the condition of the camera.
• When you record a movie continuously for a long time, the temperature of the
camera tends to rise, and you may feel that the camera is warm. However, this is
not a malfunction. Also, “Internal temp. high. Allow it to cool.” may appear. In
such cases, turn the camera off and wait until the camera is ready to shoot again.
1
Point the camera to the subject.
2
Press the MOVIE button to
start recording.
• Focus and brightness are adjusted
automatically.
• You can focus quickly by pressing
the shutter button down halfway
while recording.
3
Press the MOVIE button again to stop recording.
Notes
MOVIE button