Handbook
Table Of Contents
- Basic Operations
- Notes on using your camera
- Preparing the camera
- Shooting and viewing images
- Shooting images to suit your subject
- Using the shooting functions
- Using the playback functions
- Function list
- Viewing images on a computer
- Others
- Advanced Operations
- Preparation
- Shooting
- Playback
- Camera Setup
- Computer
- Cleaning
- Troubleshooting/Others
- Index
186
Cleaning the image sensor
If dust or debris enters the camera and adheres to the image sensor (the part
that acts as the film), it may appear as dark spots on the photo image,
depending on the shooting environment. If there is dust on the image
sensor, clean it following the steps below.
Notes
• Do not use a spray-type blower as doing so may scatter water droplets inside the
camera body.
Cleaning the image sensor automatically using the
camera’s cleaning mode
1 Press the MENU button, then
select 3 using b/B on the
control button.
MENU button
2 Select [Cleaning Mode] using v/
V, then press the center of the
control button.
3 Select [Enter] using v, and press the center of the control
button.
The image sensor vibrates for a short time, and eliminates dust from the
sensor.
4 Turn off the camera.