Handbook
Table Of Contents
- Basic Operations
- Notes on using your camera
- Preparing the camera
- Shooting and viewing images
- Shooting images to suit your subject
- Using the shooting functions
- Using the playback functions
- Function list
- Viewing images on a computer
- Others
- Advanced Operations
- Preparation
- Shooting
- Playback
- Camera Setup
- Computer
- Cleaning
- Troubleshooting/Others
- Index
188
Cleaning the image sensor
Notes
• After cleaning is finished, confirm that the mirror is locked down firmly when you
attach the lens. Otherwise the lens may be scratched or additional problems may be
caused. Also, if the mirror is not locked down firmly, the autofocus will not work
while shooting.
• You cannot shoot while the mirror is lifted up.
5 After cleaning is finished, lower
the mirror with a finger until it
clicks.
• Lower the mirror frame back down
with a finger. Be careful not to touch
the mirror surface.
• Lower the mirror down until it locks
firmly.
6 Attach the lens and turn the camera off.
• Confirm that the mirror is locked down firmly when you attach the lens.