Handbook
Table Of Contents
- Basic Operations
- Notes on using your camera
- Preparing the camera
- Shooting and viewing images
- Shooting images to suit your subject
- Using the shooting functions
- Using the playback functions
- Function list
- Viewing images on a computer
- Others
- Advanced Operations
- Preparation
- Shooting
- Playback
- Camera Setup
- Computer
- Cleaning
- Troubleshooting/Others
- Index
189
Troubleshooting/Others (Advanced Operations)
Troubleshooting/Others
Troublesho oting/Othe rs (Advanced Operations)
Troubleshooting
If you experience trouble with the camera, try the following solutions.
The battery pack cannot be installed.
• As you insert the battery pack, use the tip of the battery pack to push the
lock lever (page 21).
• Only an NP-FM500H battery pack can be used. Make sure that the battery
is NP-FM500H.
The remaining battery level indicator shows incorrect level or power runs
out quickly despite the indicator showing sufficient battery level. Cannot
turn on the camera.
• This phenomenon occurs when you use the camera in an extremely hot or
cold location (page 200).
• The battery pack is discharged. Install a charged battery pack (page 19).
• The battery pack is dead (page 208). Replace it with a new one.
• Install the battery pack correctly (page 21).
1
Check the following items.
2
Remove the battery pack and reinsert it after about 1 minute, and
turn on the power.
3
Reset the settings (page 170).
4
Consult your dealer or local authorized service facility.
Battery pack and power