Handbook
Table Of Contents
- Basic Operations
- Notes on using your camera
- Preparing the camera
- Shooting and viewing images
- Shooting images to suit your subject
- Using the shooting functions
- Using the playback functions
- Function list
- Viewing images on a computer
- Others
- Advanced Operations
- Preparation
- Shooting
- Playback
- Camera Setup
- Computer
- Cleaning
- Troubleshooting/Others
- Index
83
Preparation (Advanced Operations)
Shooting a clear image without camera
shake
“Camera shake” refers to unwanted movement of the camera that occurs
during shooting, resulting in a blurred image.
To reduce camera shake, follow the instructions below.
Notes
• The (Camera shake warning) indicator is displayed only in modes that
automatically set the shutter speed. This indicator is not displayed in M/S modes or
when you record movies.
The SteadyShot function is available with this camera to reduce camera
shake. The SteadyShot function can be set separately for still image
shooting and for movie recording.
The SteadyShot function is set to [On] in the default settings.
MENU button t 3 or 1 t [SteadyShot] t Select the
desired setting
Notes
• The SteadyShot function may not work optimally when the power has just been
turned on, right after you point the camera towards a subject, or when the shutter
button has been pressed all the way down without stopping halfway.
Camera shake warning indicator
When the camera detects potential
camera shake, the (Camera shake
warning) indicator flashes. In this case,
use a tripod or the flash.
(Camera shake warning)
indicator
Using the SteadyShot function