Interchangeable Lens Digital Camera Preparing the camera Before your operation Shooting images Instruction Manual Using the shooting function Using the viewing function A-mount Changing your setup Viewing images on a computer Printing images Others Index Additional information on this product and answers to frequently asked questions can be found at our Customer Support Website. Printed on 70% or more recycled paper using VOC (Volatile Organic Compound)-free vegetable oil based ink.
Owner’s Record The model and serial numbers are located on the bottom. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. Model No. DSLR-A580/A560 Serial No. __________________________ WARNING To reduce fire or shock hazard, do not expose the unit to rain or moisture. IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS. DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS.
• Keep the battery pack out of the reach of small children. • Keep the battery pack dry. • Replace only with the same or equivalent type recommended by Sony. • Dispose of used battery pack promptly described the instructions. interference that may cause undesired operation. This Class B digital apparatus complies with Canadian ICES-003. Battery charger UL is an internationally recognized safety organization. The UL Mark on the product means it has been UL Listed.
If you have any questions about this product, you may call: Sony Customer Information Services Center 1-800-222-SONY (7669) The number below is for the FCC related matters only. Regulatory Information Declaration of Conformity Trade Name: SONY Model No.: DSLR-A580 Responsible Party: Sony Electronics Inc. Address:16530 Via Esprillo, San Diego, CA 92127 U.S.A. Telephone No.: 858-942-2230 This device complies with Part 15 of the FCC Rules.
For Customers in Europe Notice for the customers in the countries applying EU Directives The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents.
Disposal of waste batteries (applicable in the European Union and other European countries with separate collection systems) This symbol on the battery or on the packaging indicates that the battery provided with this product shall not be treated as household waste. On certain batteries this symbol might be used in combination with a chemical symbol. The chemical symbols for mercury (Hg) or lead (Pb) are added if the battery contains more than 0.0005% mercury or 0.004% lead.
Notes on using your camera Shooting procedure • This camera has two modes for shooting: the Live View mode using the LCD monitor, and the viewfinder mode using the viewfinder (OVF). • There may be differences between an image recorded in Live View mode and an image recorded in viewfinder mode, such as exposure, white balance, or Drange optimizer, depending on the method used of metering or the exposure mode.
• Images may trail across on the LCD monitor in a cold location. This is not a malfunction. When turning on the camera in a cold location, the LCD monitor may become temporarily dark. When the camera warms up, the monitor will function normally. • Do not press against the LCD monitor. The monitor may be discolored and that may cause a malfunction. Notes on long-time recording • When you continue to shoot for a long time, the temperature of the camera rises.
Table of Contents Notes on using your camera .............................................. 7 Preparing the camera Checking the accessories supplied .................................. 13 Identifying parts .............................................................. 14 Preparing the battery pack ............................................... 18 Attaching a lens ............................................................... 25 Inserting a memory card ..................................................
Shooting 3D-panoramic images (3D Sweep Panorama) ......................................................... 69 Shooting an image the way you want it (Exposure mode) ..................................................................................... 70 Shooting with program auto .................................. 71 Shooting by controlling the blur of the background (Aperture priority) .............................................
Selecting the flash control mode to set the amount of flash light (Flash control) ................................ 106 Selecting the method for measuring the brightness of a subject (Metering Mode) ................................. 107 Setting ISO .................................................................... 108 Compensating for the brightness and contrast automatically (D-Range) .................................................................
Changing your setup Setting image size and image quality ............................ 140 Setting the method for recording on a memory card ..... 144 Changing the noise reduction setting ............................ 148 Changing the function of the buttons ............................ 149 Changing other settings ................................................. 150 Setting the LCD monitor ............................................... 152 Confirming the version of the camera ...........................
Preparing the camera Checking the accessories supplied The number in parentheses indicates the number of pieces.
Identifying parts See the pages in parentheses for details of operation. Front side A Shutter button (61) M Lens release button (26) B Power switch (31) N Focus mode switch (85, 90) C Control dial (73) * Do not directly touch these parts.
Rear side Preparing the camera A Diopter-adjustment dial (40) J LCD monitor (42, 123, 129) B Microphone** • You can adjust the angle of the LCD monitor to meet various shooting situations.
Q ISO button (108) R Image sensor position mark (87) S For shooting: AEL (AE lock) button (78, 102)/Focus Magnifier button (93, 149) For viewing: (Zoom in) button (126) T For shooting: Fn (Function) button (50, 51) For viewing: (Image rotation) button (125) U Access lamp (28) V Controller (v/V/b/B button) (49) W Controller (Enter) (49)/AF button (89) X (Delete) button (134) * Do not directly touch these parts. ** Do not cover this part during movie recording.
Sides/Bottom B (USB) terminal (164) C Speaker D REMOTE terminal • When connecting the RMS1AM/RM-L1AM Remote Commander (sold separately) to the camera, insert the plug of the Remote Commander into the REMOTE terminal, aligning the guide of the plug with the guide of the REMOTE terminal. Make sure that the cord of the Remote Commander faces forward. E MIC (PLUG IN POWER) jack • When an external microphone is connected, the internal microphone is turned off automatically.
Preparing the battery pack When using the camera for the first time, be sure to charge the NPFM500H “InfoLITHIUM” battery pack (supplied). Charging the battery pack The “InfoLITHIUM” battery pack can be charged even when it has not been fully depleted. It can also be used when it has not been fully charged. 1 Insert the battery pack on the battery charger. Push the battery pack until it clicks. 2 Connect the power cord (mains lead).
To use your camera abroad — Power sources You can use your camera and the battery charger and the AC-PW10AM AC Adaptor (sold separately) in any country or region where the power supply is within 100 V to 240 V AC, 50/60 Hz. Note • Do not use an electronic transformer (travel converter), as this may cause a malfunction. 19 Preparing the camera • Do not charge any battery pack other than the “InfoLITHIUM” M series battery pack in the battery charger (supplied) with your camera.
Representative plug of power supply cord of countries/regions around the world. A Type (American Type) B Type (British Type) BF Type (British Type) B3 Type (British Type) C Type (CEE Type) SE Type (CEE Type) O Type (Ocean Type) The representative supply voltage and plug type are described in this chart. Depend on an area, Different type of plug and supply voltage are used. Attention: Power cord meeting demands from each country shall be used. -For only the United States Use a UL Listed, 1.
230 110 220 220 50 60 50 50 BF A C/BF A/C Voltage 240 230/240 Frequency (Hz) 50 50 Plug type O O Voltage 120 120 Frequency (Hz) 60 60 Plug type A A Voltage 120/240 110 110/220 110 110 120 110 110 120/127 120/240 110/220 Frequency (Hz) 60 60 60 60 60 60 60 50 60 60 60 Plug type A A A/C A A A A A A A A Voltage 220 127/220 220 120 220 120 Frequency (Hz) 50 60 50 60 60 60 Plug type C/BF/O A/C C A A/C A Voltage 220 220 230 127/220 220 240 Frequency (Hz) 50 50 50 50 50 50 Plug type C/BF C/BF C A/
Inserting the charged battery pack 1 While sliding the battery cover open lever, open the battery cover. 2 Firmly insert the battery pack all the way while pressing the lock lever with the tip of the battery. Lock lever 3 Close the battery cover. To remove the battery pack Turn off the camera and slide the lock lever in the direction of the arrow. Be careful not to drop the battery pack.
To remove the battery cover To check the remaining battery level Check the level with the following indicators and percent figures displayed on the LCD monitor. “Battery exhausted.” Battery level High Low You cannot shoot any more pictures. What is an “InfoLITHIUM” battery pack? An “InfoLITHIUM” battery pack is a lithium-ion battery pack that has functions for exchanging information related to operating conditions with your camera.
Effective use of the battery pack • Battery performance decreases in low temperature surroundings. So, the time that the battery pack can be used is shorter in cold places and the speed of continuous shooting slows down. We recommend that you put the battery pack in a pocket close to your body to warm it up, and insert it in your camera immediately before you start shooting.
Attaching a lens 1 Remove the body cap from the camera and the packaging lid from the rear of the lens. Body cap Preparing the camera • When changing the lens, quickly change the lens away from dusty locations so as to keep dust or debris from getting inside the camera. Packaging lid 2 Mount the lens by aligning the orange index marks on the lens and camera. Orange index marks 3 Turn the lens clockwise until it clicks into the locked position. • Be sure to put the lens on straight.
To remove the lens 1 Press the lens release button all the way in and turn the lens counterclockwise until it stops. Lens release button 2 Replace the packaging lid on the lens and attach the body cap to the camera. • Before you attach them, remove dust from them. • A rear lens cap is not supplied with the DT 18-55mm F3.5-5.6 SAM Lens Kit. When you store the lens without attaching it to the camera, purchase the Rear Lens Cap ALC-R55.
Inserting a memory card 1 Open the memory card cover. media or an SD memory card. Face side (SD memory card) Terminal part • Insert the memory card until it clicks as illustrated. Face side (“Memory Stick PRO Duo”) Terminal part 3 Select the type of memory card you want to use using the memory card switch. • If you switch the memory card while the power is turned on, the LCD monitor is turned off for a few seconds. This is not a malfunction. 4 Close the memory card cover.
Available memory cards • Only “Memory Stick PRO Duo” media, “Memory Stick PRO-HG Duo” media, SD memory cards, SDHC memory cards and SDXC memory cards can be used with this camera. A MultiMediaCard cannot be used with this camera. However, proper operation cannot be guaranteed for all memory cards functions.
Notes on using memory cards 29 Preparing the camera • Do not strike, bend or drop the memory card. • Do not use or store the memory card under the following conditions: – High temperature locations such as the hot interior of a car parked in direct sunlight. – Locations exposed to direct sunlight. – Humid locations or locations with corrosive substances present. • The memory card may be hot just after it has been used for a long time. Be careful when you handle it.
Notes on the “Memory Stick” media used with the camera The types of “Memory Stick” media that can be used with this camera are listed in the table below. However, proper operation cannot be guaranteed for all “Memory Stick PRO Duo” media functions.
Preparing the camera Setting up the date When you turn the camera on for the first time, the date/time setup screen appears. Preparing the camera 1 Set the power switch to ON to turn the camera on. The screen used for setting date and time appears. • To turn the camera off, set it to OFF. 2 Verify that [Enter] is selected on the LCD monitor, then press the center of the controller. 3 Select your area with b/B on the controller, then press the center of the controller.
5 Repeat step 4 to set other items, then press the center of the controller. 6 Verify that [Enter] is selected, then press the center of the controller. To cancel the date/time setting operation Press the MENU button. To set up the date/time again When you turn the camera on for the first time, the date/time setup screen appears automatically. The next time, set up the date and time from the menu.
Using the accessories supplied This section describes how to use the shoulder strap, the eyepiece cover, and eyecup. The other accessories are described in the following pages. • Rechargeable battery pack (page 18) • Battery charger, Power cord (mains lead) (page 18) • USB cable (page 164) • CD-ROM (page 160) Preparing the camera Attaching the shoulder strap Attach both ends of the strap onto the camera. Eyepiece cover • You can also attach the eyepiece cover (page 34) on the strap.
Using the eyepiece cover and eyecup You can prevent light from entering through the viewfinder and affecting the exposure. When the shutter is released without the use of the viewfinder in viewfinder mode, as in shooting with the self-timer, attach the eyepiece cover. 1 Tilt the LCD monitor downward. 2 Carefully slide the eyecup off by pushing on each side of the eyecup. • Put your fingers under the eyecup, and slide it upward.
Checking the number of recordable images Notes • When “0” (the number of recordable images) flashes in yellow, the memory card is full. Replace the memory card with another one, or delete images in the current memory card (page 134). • When “NO CARD” (the number of recordable images) flashes in yellow, it means no memory card has been inserted. Insert a memory card.
DSLR-A560 Capacity (Units: Images) 2GB 4GB 8GB 16GB 433 875 1778 3626 7172 305 618 1258 2569 5083 RAW & JPEG 84 176 362 745 1478 RAW 122 251 514 1054 2089 Size Standard Fine 32GB * When [Image: Aspect Ratio] is set to [16:9], you can record more images than the numbers shown in the table above (except when [RAW] is selected).
Cleaning Cleaning the camera Cleaning the lens • Do not use a cleaning solution containing organic solvents, such as thinner, or benzine. • When cleaning the lens surface, remove dust using a commercially available blower. In case of dust that sticks to the surface, wipe it off with a soft cloth or tissue paper slightly moistened with lens cleaning solution. Wipe in a spiral pattern from the center to the outside. Do not spray lens cleaning solution directly onto the lens surface.
Cleaning the image sensor If dust or debris enters the camera and lands on the image sensor (the part that acts as the film), it may appear on the photo image, depending on the shooting environment. If there is dust on the image sensor, use a commercially available blower and clean the image sensor following the steps below. You can easily clean the image sensor using only the blower and the anti-dust function. Notes • Cleaning can be performed only when the battery level is 50% or more.
6 Use the blower to clean the image sensor surface and the surrounding area. Preparing the camera • Do not touch the image sensor with the tip of the blower. Complete the cleaning quickly. • Hold the camera's face downward to prevent the dust from resettling in the camera. • When cleaning the image sensor, do not put the tip of a blower into the cavity beyond the mount. 7 Attach the lens and turn the camera off. Note • The camera starts beeping if the battery pack becomes low during cleaning.
Before your operation Switching between the LCD monitor and viewfinder (OVF) You can select either the LCD monitor (Live View) or the viewfinder (OVF) to shoot images. LIVE VIEW: Monitors subjects using the LCD monitor. OVF: Monitors subjects using the viewfinder. On the LCD monitor, the recording information is displayed instead.
When it is hard to rotate the diopter-adjustment dial Put your fingers under the eyecup, and slide it upward to remove the eyecup, then adjust the diopter. Before your operation To focus on a subject quickly using the viewfinder When you look into the viewfinder, the subject located in the AF area comes into focus automatically (Eye-Start AF).
The status of the screen in Live View mode Switching the status of the LCD monitor In Live View mode, each time you press the DISP button, the recording information display changes as follows. DISP button Graphic Display Recording information on Recording information off Note • In focus check Live View mode, the digital level gauge is displayed after “recording information off” (page 91).
Recording information display The Graphic Display graphically shows the shutter speed and aperture value and clearly illustrates how the exposure works. See pages in parentheses for details of operation.
Display Indication E REC 0:12 Recording time of the movie (m:s) Display ISO sensitivity (108) C Display Metering (107) Indication z Focus (86) 1/125 Shutter speed (75) F3.5 Aperture (72) EV scale (78, 121) AE lock (102) Camera shake warning (59) SteadyShot scale (59) D Display Indication Drive mode (118) Flash mode (98)/Red-eye reduction (100) Focus mode (88) AF area (89) Face Detection (95) Smile Shutter (96) Smile Detection Sensitivity indicator (96) 44 Indication +2.
The status of the screen in viewfinder (OVF) mode Switching the status of the LCD monitor Graphic Display (Default setting) Before your operation In viewfinder mode, press the DISP button to switch between the Graphic Display and the Standard Display. When you rotate the camera to a vertical position, the display automatically rotates to adjust to the camera position.
Recording information display on the LCD monitor The Graphic Display graphically shows the shutter speed and aperture value and clearly illustrates how the exposure works. In AUTO or Scene Selection mode, only the items that can be set are displayed. See the pages in parentheses for details of operation.
Display Indication Display 100% Remaining battery (23) Indication Creative Style (112) Overheating warning (188) No audio recording of movies (83) Display Indication 1/125 Shutter speed (75) F2.8 Aperture (72) +1.
Viewfinder A Display Indication AF area (89) Spot metering area (107) Shooting area for aspect ratio 16:9 (142) B Display Indication Flash compensation (105) Flash charging (98) WL Wireless flash (101) High-speed sync Manual focus (90) z Focus 125 Shutter speed (75) 5.
Selecting a function/setting You can select a function for shooting or playback with the one of buttons, such as the Fn (Function) button, or the MENU button. Before your operation When you start an operation, an operation guide of controller functions will be displayed at the bottom of the screen. : Press v/V/b/B on the controller to move the cursor. z: Press the center button to execute the selection.
Selecting a function with the Fn (Function) button This button is used for setting up or executing functions used frequently in shooting. 1 Press the Fn button. 2 Select the desired item with v/V/ b/B on the controller, then press the center z to execute. The setup screen appears. 3 Following the operation guide, select and execute the desired function. • For details on how to set up each item, see the corresponding page.
The functions selected by the Fn (Function) button The items that will be displayed depend on the position of the mode dial. Scene Selection (63) Selects an appropriate mode from among the Scene Selection preset settings to suit shooting conditions. Sweep Shooting (66, Switches between Sweep Panorama and 3D Sweep 69) Panorama. Sets the shooting mode to single-shot adv., continuous adv., self-timer, bracket shooting, etc. Flash Mode (98) Sets the flash mode to Autoflash, Fill-flash, Flash Off, etc.
The functions selected by the MENU button You can set up the basic settings for the camera as a whole or execute functions such as shooting, playback, or other operations. Press the MENU button, select the desired page with b/B on the controller, and select the desired item with v/V. Recording menu Image: Size (140) Selects the size of still images. Image: Aspect Ratio (142) Selects the aspect ratio for still images. Image: Quality (142) Sets the images quality for still images.
Panorama: Size (141) Selects the size of panoramic images. Panorama: Direction Sets the shooting direction for panoramic images. (68) Selects the size of 3D-images. 3D Pan.: Direction (69) Sets the shooting direction for 3D-images. Flash control (106) Sets the method for determining the intensity of flash output. AF Illuminator (100) Sets the AF illuminator, which sheds light on a dark scene to aid focusing. AF method (91) Sets the autofocus system in focus check Live View mode.
Custom menu 54 Eye-Start AF (41) Sets whether or not to use auto focus when you look through viewfinder. Func. of AEL button (149) Sets the function of the AEL button between AE lock and Focus Magnifier in focus check Live View mode. AEL (149) Sets the operation method of the AE lock button for fixing exposure during shooting. Focus Hold Button (149) Sets the function of the focus hold button of the lens. Red Eye Reduction (100) Reduces the red-eye phenomenon during flash use.
Playback menu Deletes images. Still/Movie Select (124) Switches between the still image playback screen and the movie playback screen. Slide Show (127) Shows a slide show. 3D Viewing (137) Plays back 3D-images using a 3D-compatible TV connected to the camera. Protect (133) Protects or cancels protection for an image. Specify Printing (171) Specifies or unspecifies the images for DPOF. Volume Settings (124) Sets the volume for movie playback.
Memory Card Tool menu Format (145) Formats the memory card. File Number (144) Sets the method used to assign file numbers to still images and movies. Folder Name (144) Sets the folder format for still images. Select REC Folder (145) Changes the selected folder for storing still images. New Folder (145) Creates a new folder for storing still images and movies. Recover Image DB (146) Recovers the image database file for movies and enables recording and playback.
Setup menu LCD Brightness (152) Sets the brightness of the LCD monitor. Power Save (LV) (150) Sets the interval after which power save mode engages in Live View mode. Power Save (OVF) (150) Sets the interval after which power save mode engages in viewfinder mode. CTRL FOR HDMI (137) Operates the camera from a TV that support “BRAVIA” Sync. Selects the language.
Shooting images Shooting an image without camera shake “Camera shake” refers to unwanted movement of the camera that occurs after the shutter button has been pressed, resulting in a blurred image. To reduce camera shake, follow the instructions below. Correct posture Stabilize your upper body and take a position that keeps the camera from moving. In Live View mode In viewfinder mode Point 1 One hand holds the grip of the camera, and the other hand supports the lens.
Point 3 Lightly tuck your elbows against your body. When shooting in a kneeling position, steady your upper body by placing your elbow on your knee. Camera shake warning indicator Due to potential camera shake, the (Camera shake warning) indicator flashes. In this case, use a tripod or the flash. Note • The (Camera shake warning) indicator is displayed only in the modes that automatically set the shutter speed. This indicator is not displayed in M/S modes.
Note • The SteadyShot function may not work optimally when the power has just been turned on, right after you point the camera towards a subject, or when the shutter button has been pressed all the way down without stopping halfway. Using a tripod In the following cases, we recommend that you mount the camera on a tripod. • Shooting without a flash under dark conditions. • Shooting with slow shutter speeds, which are typically used in night-time shooting.
Shooting with the automatic setting The “AUTO” mode allows you to easily shoot any subject under any conditions because the camera makes appropriate judgments on the situation to adjust the settings. Select when shooting in a location where the use of a flash is restricted. 1 Set the mode dial to or (Flash Off). or Shooting images 2 Adjust the LCD monitor to an easily viewable angle and hold the camera. 3 Overlay the AF area on the desired subject.
5 Press the shutter button halfway down to focus. When the focus is confirmed, z or (Focus indicator) lights up (page 86). • Waiting until the (SteadyShot scale) indicator is low makes the SteadyShot function more effective. Focus indicator (SteadyShot scale) indicator 6 Press the shutter button fully down to shoot. Note • Since the camera turns on the automatic setting function, many features will be unavailable, such as exposure compensation, ISO setting.
Shooting with a suitable setting for the subject Selecting an appropriate mode for the subject or the shooting conditions allows you to shoot the image with a suitable setting for the subject. Shooting with preset settings according to the scene (Scene Selection) 1 Set the mode dial to Shooting images This mode is suitable for z Shooting with preset settings according to the scene (Scene Selection). 2 Press the center of the controller.
(Portrait) Blurs away backgrounds and sharpens the subject. Expresses skin tones softly. • To blur the background more, set the lens to the telephoto position. • You can shoot a vivid image by focusing on the eye that is closer to the lens. • Use the lens hood (sold separately) to shoot backlit subjects. • Use the red-eye reduction function if the eyes of your subject turn red from the flash (page 100).
(Night View) (Hand-held Twilight) Shoots night scenes with less noise and blur without using a tripod. A burst of shots are taken, and image processing is applied to reduce subject blur, camera shake, and noise.
Shooting panoramic images (Sweep Panorama) This mode is suitable for z Shooting expansive scenery, or high-rise buildings with dynamic composition. 1 Set the mode dial to (Sweep Shooting). 2 Press the center of the controller. 3 Select [Sweep Panorama] with v/V, then press the center of the controller. • To select [3D Sweep Panorama], press the Fn button, then select it. 4 Point the camera at the edge of the subject, then press the shutter button halfway down to adjust the focus.
6 Pan or tilt the camera to the end, following the guidance on the screen. Guidance bar 67 Shooting images Notes • If you cannot pan or tilt the camera across the entire subject within the given time, a gray area occurs in the composed image. If this happens, move the camera fast to record a full panoramic image. • Since several images are stitched together, the stitched part will not be recorded smoothly.
Tips for shooting a panoramic image Pan or tilt the camera in an arc with a Vertical constant velocity and in the same direction direction as the indication on the screen. [Sweep Panorama] is better suited for still subjects, rather than moving ones. Horizontal direction Radius as short as possible • In Sweep Panorama, it is recommended that you use a wide-angle lens. • When you use a lens that has a long focal length, pan or tilt the camera more slowly than when you use a wide-angle lens.
Shooting 3D-panoramic images (3D Sweep Panorama) This mode is suitable for z Shooting 3D-panoramic images and making the images seen alive on a 3Dcompatible TV screen. Shooting images 1 Set the mode dial to (Sweep Shooting). 2 Press the center of the controller. 3 Select [3D Sweep Panorama] with v/V, then press the center of the controller. • To select [Sweep Panorama], press the Fn button, then select it. 4 Shoot a subject in the same way as that of [Sweep Panorama] shooting (pages 66 to 68).
Shooting an image the way you want it (Exposure mode) With an Interchangeable Lens Digital Camera, you can adjust the shutter speed (how long the shutter is open) and aperture (the range that is in focus: depth of field) to enjoy a variety of photographic expressions.
Shooting with program auto This mode is suitable for z Using the automatic exposure, while keeping the custom settings for ISO sensitivity, Creative Style, D-Range optimizer, etc. 2 Set the shooting functions to your desired settings (pages 85 to 122). • To fire the flash, press the button. 3 Adjust the focus and shoot the subject. 71 Shooting images 1 Set the mode dial to P.
Shooting by controlling the blur of the background (Aperture priority) This mode is suitable for z Putting the subject in sharp focus and blur everything in front of and beyond the subject. Opening the aperture narrows the range that is in focus. (Depth of field becomes shallower.) z Shooting the depth of the scenery. Narrowing down the aperture widens the range that is in focus. (Depth of field becomes deeper.) 1 Set the mode dial to A.
2 Select the aperture value (Fnumber) with the control dial. Aperture (F-number) 3 Adjust the focus and shoot the subject. The shutter speed is automatically adjusted to obtain correct exposure. • When the camera judges that the proper exposure is not obtained with the selected aperture value, the shutter speed flashes. In such cases, adjust the aperture again. Shutter speed Shooting techniques • The shutter speed may become slower depending on the aperture value.
To check blurring of the background (Preview button) The LCD monitor and the viewfinder shows an image captured with the widest aperture. The change in aperture affects the sharpness of the subject image, creating a discrepancy between the sharpness of the image before shooting and that of the actual image. While you are pressing the preview button, you can see the image with the aperture used in the actual shot so that you can check the approximate sharpness of the subject before shooting.
Shooting a moving subject with various expressions (Shutter speed priority) This mode is suitable for z Shooting a moving subject at a moment in time. Use a faster shutter speed to crisply shoot an instant of the movement. Shooting images z Tracing the movement to express the dynamism and flow. Use a slower shutter speed to shoot a trailing image of the moving subject. 1 Set the mode dial to S.
2 Select the shutter speed with the control dial. Shutter speed 3 Adjust the focus and shoot the subject. The aperture is automatically adjusted to obtain correct exposure. • When the camera judges that the proper exposure is not obtained with the selected shutter speed, the aperture value flashes. In such cases, adjust the shutter speed again. Aperture (F-number) Shooting techniques • When the shutter speed is slower, use a tripod. • When shooting an indoor sport, select a higher ISO sensitivity.
• Press the button when you shoot with the flash. However, when using the flash, if you close the aperture (a larger F-number) by making the shutter speed slower, the light of the flash will not reach distant subjects. Shooting with the exposure adjusted manually (Manual exposure) This mode is suitable for z Shooting with the desired exposure setting by adjusting both the shutter speed and aperture. Shooting images 1 Set the mode dial to M.
3 Shoot the image after the exposure is set. • Check the exposure value on the EV scale (Metered Manual*). Toward +: Images become brighter. Toward –: Images become darker. The b B arrow appears if the set exposure is beyond the range of the EV scale. The arrow starts flashing if the difference becomes greater. * When the camera is in M mode, it will show an under or over compensation value based on the correct exposure using the index on the exposure compensation indicator.
Shooting trails with long exposure (BULB) This mode is suitable for z Shooting trails of light, such as fireworks. z Shooting trails of stars. Shooting images 1 Set the mode dial to M. 2 Rotate the control dial to the left until [BULB] is indicated. BULB 3 While pressing the button, rotate the control dial to adjust the aperture (F-number).
4 Press the shutter button halfway down to adjust the focus. 5 Press and hold the shutter button for the duration of the shooting. As long as the shutter button is pressed, the shutter remains open. Shooting techniques • Use a tripod. • Set the focus to infinity in manual focus mode when shooting fireworks, etc. When the infinity position of the lens is not known, first adjust the focus on fireworks that is set off in the same general area, then shoot them.
Recording movies 1 Adjust the focus. 2 Press the MOVIE button to start MOVIE button recording. 3 Press the MOVIE button again to stop recording. To obtain your desired aperture values Set the mode dial to “A” and select the aperture value (F number) using the control dial, then start recording your movie. You can record with the selected aperture value. This is convenient when you have to adjust the blurring of a background.
Notes • The autofocus cannot be used during movie recording. Adjust the focus using the autofocus or manual focus before pressing the MOVIE button. • The angle of view of movies is narrower than that of still images (DSLR-A560 only). After you press the MOVIE button, the camera shows the actual range to be recorded. • The Face Detection function cannot be used. • Do not shoot a strong light source, such as the sun. The internal mechanism of the camera may be damaged.
Audio recording When you record movies, the operating noise of the camera or lens may be recorded. You can reduce the noise of the camera by using a tripod, and setting the SteadyShot function to off. You can also record movies without audio. MENU button t 1 t [Movie: Audio Rec.
DSLR-A560 (Units: hour : minute : second) Capacity File format/ Size AVCHD 1920 × 1080 2GB 4GB 8GB 16GB 32GB 0:14:00 0:28:30 0:58:10 1:58:50 3:55:20 MP4 1440 × 1080 0:20:40 0:41:40 1:24:40 2:52:30 5:41:00 MP4 VGA 1:15:10 2:31:10 5:06:20 10:23:50 20:33:00 Note • The values shown are not the continuous recording time. Notes on continuous movie recording • Each continuous recording time value indicated is depending on the temperature or status of the camera.
Using the shooting function Selecting the focus method There are two methods for adjusting the focus: autofocus and manual focus. Depending on the lens, the method for switching between the auto focus and manual focus is different. The switch to be used The lens is Lens (Always set equipped with a the focus mode focus mode switch switch on the camera to AF.) The lens is not Camera equipped with a focus mode switch The type of lens To switch to auto focus Set the focus mode switch on the lens to AF.
3 Press the shutter button halfway down to check the focus and shoot the image. • When the focus is confirmed, the focus indicator changes to z or (below). • The AF area where the focus has been confirmed turns green. AF area Focus indicator Shooting technique • To select the AF area used for focusing, set up [AF area] (page 89). Focus indicator Focus indicator Status z lit Focus locked. Ready to shoot. lit Focus is confirmed. Focal point moves following a moving subject. Ready to shoot.
To measure the exact distance to the subject The mark located on the top of the camera shows the location of the image sensor*. When you measure the exact distance between the camera and the subject, refer to the position of the horizontal line. * The image sensor is the part of the camera that acts as the film. Shooting with your desired composition (Focus-lock) 1 Place the subject within the AF area and press the shutter button halfway down. The focus and exposure are fixed.
Selecting the focus method to suit the movement of the subject (Autofocus Mode) Fn button t (Single-shot AF) (Autofocus Mode) t Select the desired setting The camera focuses and the focus is locked when you press the shutter button halfway down. (Automatic AF) The [Autofocus Mode] is switched between Single-shot AF and Continuous AF according to the movement of the subject.
Selecting the focus area (AF area) Select the desired AF area to suit the shooting conditions or your preference. The AF area where the focus has been confirmed turns green and the other AF areas disappear. • In viewfinder mode, the AF areas that were not used to adjust the focus will disappear. Viewfinder AF area AF area Fn button t (AF area) t Select the desired setting (Wide) The camera determines which of the 15 AF areas (the 11 AF areas in viewfinder mode) is used in focusing.
Notes • The available AF area settings depend on the status of the [AF method] setting (page 91). When [Contrast AF] is selected, [Spot] and [Flexible Spot] are available. When [Phase-detect AF] is selected, [Wide], [Spot], and [Local] are available. • When the exposure mode is set to AUTO or Scene Selection, or the Smile Shutter is activated, [AF area] is fixed to [Wide] and you cannot select the other settings.
• When using a tele converter (sold separately), etc., rotation of the focusing ring may not be smooth. • The correct focus in the viewfinder is not achieved if the diopter is not adjusted properly in viewfinder mode (page 40). Composing your shot using the image sensor (Focus check Live View) The image on the image sensor is displayed on the LCD monitor with 100% frame coverage. 1 Press the FOCUS CHECK LV FOCUS CHECK LV button button. 2 Adjust the focus and shoot the image.
In focus check Live View mode, each AF method has the following differences. Contrast AF Live View works even when the focus is being adjusted. • Only when SAM lenses or SSM lenses are used. • The Face Detection and Smile Shutter functions cannot be used. • The AF area setting can be selected from either [Spot] or [Flexible Spot]. Phase-detect AF This shortens the time the focus is achieved, however, Live View does not work when the focus is being adjusted.
The digital level gauge of this camera In focus check Live View mode, press the DISP button so that the digital level gauge is displayed (page 42). The digital level gauge indicates whether the camera is level in both the horizontal and frontback directions. When the camera is level in both directions, the indicator turns to green. Horizontal direction Front-back direction Checking the focus by enlarging the image You can check the focus by enlarging the image before shooting.
3 Press the AEL button again to enlarge the image and select the portion you want to enlarge with v/V/b/B on the controller. • Each time you press the AEL button, the zoom scaling changes as follows: Full display t Approx. ×7.5 t Approx. ×15 (DSLR-A580)/Full display t Approx. ×7 t Approx. ×14 (DSLR-A560) 4 Adjust the focus and shoot the subject. • You can record images when an image is enlarged, however the recorded image is for full display. • The Focus Magnifier function will be released after shooting.
Detecting faces Using the Face Detection function The camera detects faces, adjusts the focus, exposure, performs image processing, and adjusts flash settings. The Face Detection function is set to [On] in the default setting. The Face Detection frame To deactivate the Face Detection function Fn button t (Face Detection) t [Off] Shooting technique • Compose to overlay the Face Detection frame and the AF area.
• Up to eight faces can be detected. • The camera may not detect any faces, or may detect some other object, depending on the shooting conditions. Capturing smiling faces (Smile Shutter) When the camera detects a smile, the shutter is released automatically.
• Do not obscure the face with a hat, a mask, sunglasses, etc. • Try to orient the face in front of the camera and keep it as level as possible. • Hold a clear smile with an open mouth. The smile is easier to detect when the teeth are showing. • If you press the shutter button while the Smile Shutter function is activated, the camera shoots the image, and then returns to Smile Shutter.
Using the flash In a dark location, using the flash allows you to shoot the subject brightly, and it also helps to prevent camera shake. When shooting into the sun, you can use the flash to shoot a bright image of the backlit subject. 1 Fn button t 2 Press the (Flash Mode) t Select the desired setting button. button The flash pops up. • In AUTO or Scene Selection mode, the flash automatically pops up if the amount of light is insufficient or the subject is backlit.
(Flash Off) Does not fire even the built-in flash pops up. (Autoflash) Fires if it is dark or against light. (Fill-flash) Fires every time you trigger the shutter. When the exposure mode is set to P, A, S, or M, press the button to pop the flash up before shooting. (Slow Sync.) Fires every time you trigger the shutter. Slow sync shooting allows you to shoot a clear image of both the subject and the background by slowing the shutter speed. (Rear Sync.
The flash range The range of the built-in flash depends on the ISO sensitivity and aperture value. Refer to the following table. Aperture ISO setting F2.8 F4.0 F5.6 100 1 m– 4.3 m (3.3 feet– 14 feet) 1 m– 3 m (3.3 feet– 9.8 feet) 1 m– 2.1 m (3.3 feet – 6.9 feet) 200 1 m– 6 m (3.3 feet – 1 m– 4.3 m (3.3 feet 1 m– 3 m (3.3 feet – 20 feet) – 14 feet) 9.8 feet) 400 1.4 m– 8.6 m (4.6 feet – 28 feet) 1 m– 6 m (3.3 feet – 1 m– 4.3 m (3.3 feet 20 feet) – 14 feet) 800 2 m– 12 m (6.6 feet – 39 feet) 1.
Performing wireless flash shooting With a flash that has a wireless shooting function (sold separately), you can shoot with the flash without a cord, even when the flash is not attached to the camera. By changing the position of the flash, you can shoot an image with a three dimensional feel by highlighting the contrast of light and shadow on the subject. For the actual steps of shooting, refer to the operating instructions of the flash.
Adjusting the brightness of the image (Exposure, Flash compensation, Metering) Shooting with fixed brightness (AE Lock) When shooting into the sun or by a window, the exposure may not be appropriate for the subject because of the big difference in lighting between the subject and the background. In such cases, use the light meter where the subject is bright enough and lock the exposure before shooting.
3 Press the AEL button to lock the exposure. (AE lock mark) appears. AEL button 4 While pressing the AEL button, focus on the subject, and shoot the subject. Note • In focus check Live View mode (page 91), set [Func. of AEL button] to [AEL] in the Custom menu. Using brightness compensation for the entire image (Exposure compensation) Except for exposure mode M, the exposure is automatically selected (Automatic exposure).
1 Press the button. button • The exposure compensation screen is displayed in the viewfinder mode. 2 Adjust the exposure with the control dial. Toward + (over): Brightens an image. Toward – (under): Darkens an image. Standard exposure 3 Adjust the focus and shoot the subject. Shooting techniques • Adjust the compensation level by checking the recorded image. • Using bracket shooting, you can shoot multiple images with the exposure shifted to the plus or minus sides (page 120).
Notes • The histogram displayed in Live View mode does not indicate the final recorded image. It indicates the condition of the image just monitored on the screen. The histogram will differ based on aperture setting, etc. • The histogram differs between shooting and playback in the following situations: – When firing the flash. – When the subject has low intensity, such as night scenery.
Notes • This item cannot be set when the exposure mode is set to AUTO, Sweep Shooting, or Scene Selection. • If you have adjusted the flash level, appears in the viewfinder when the built-in flash is pulled up. When you adjust it, be careful not to forget to reset the value. • The higher flash effect may not be visible due to the limited amount of flash light, if the subject is outside the maximum range of the flash. If the subject is very close, the lower flash effect may not be visible.
Notes • When the distance between the subject and the external flash (sold separately) cannot be determined (wireless flash shooting using an external flash (sold separately), shooting with an off-camera flash using a cable, shooting with a macro twin flash, etc.), the camera automatically selects Pre-flash TTL mode. • Select [Pre-flash TTL] in the following cases, as the camera cannot perform flash compensations with ADI flash. – A wide panel is attached to the HVL-F36AM flash.
Setting ISO Sensitivity to light is expressed by the ISO number (recommended exposure index). The larger the number, the higher the sensitivity. 1 Press the ISO button to display ISO button the ISO screen. 2 Select the desired setting with v/V on the controller. • The larger the number, the higher the noise level. • If you select [Multi Frame Noise Reduct.], select the desired value with b/ B.
Compensating for the brightness and contrast automatically (D-Range) D-RANGE button t Select the desired setting (Off) D-RANGE button Does not use the DRO/Auto HDR functions. By dividing the image into small areas, the camera analyses the contrast of light and shadow between the subject and the background, producing the image with the optimal brightness and gradation.
Notes • The setting is fixed to [Off] when [Sunset], [Night View], [Night Portrait], or [Handheld Twilight] is selected in Scene Selection. The setting is fixed to [Auto] when other modes are selected in Scene Selection. • When shooting with the D-Range optimizer, the image may be noisy. Select the proper level by checking the recorded image, especially when you enhance the effect.
• When the exposure mode is set to AUTO, Sweep Shooting, or Scene Selection, you cannot select [Auto HDR]. • You cannot select [Auto HDR] during Smile Shutter. If you turn on the Smile Shutter function with [Auto HDR] selected, the camera will temporarily use with the DRO setting. • You cannot start the next shoot until the capture process is completed after you shoot. • You may not obtain a desired effect depending on the luminance difference of a subject and the shooting conditions.
Image processing Selecting your desired image processing (Creative Style) In addition to the desired image processing, you can adjust the exposure (shutter speed and aperture) as you like with [Creative Style], unlike Scene Selection where the camera adjusts the exposure. 1 Fn button t (Creative Style) t Select the desired setting 2 When you want to adjust (Contrast), (Saturation), or (Sharpness), select the desired item with b/B on the controller, then adjust the value with v/V.
(Contrast), (Saturation), and Creative Style item. (Sharpness) can be adjusted for each (Contrast) The higher the value selected, the more the difference of light and shadow is accentuated, thus making an impact on an image. (Saturation) The higher the value selected, the more vivid the color. When a lower value is selected, the color of the image is restrained and subdued. (Sharpness) Adjusts the sharpness.
Adjusting the color tones (White balance) The color tone of the subject changes depending on the characteristics of the light source. The table below shows how the color tone changes based on various light sources, compared with a subject that appears white under the sunlight. Daylight Cloudy Fluorescent Incandescent White Bluish Green-tinged Reddish Weather/ lighting Characteristics of light White balance is a feature that adjusts the color tone to approximate what you see.
AWB (Auto WB) The camera automatically detects a light source and adjusts the color tones. (Daylight) If you select an option to suit a specific light source, the color tones are adjusted for the light source (preset white balance). (Shade) (Cloudy) (Incandescent) (Fluorescent) (Flash) Shooting techniques Setting the color temperature and a filter effect (Color Temperature/Color Filter) Fn button t AWB (White Balance) t [5500K] (Color Temp.
5500K*1 (Color Temp.) Sets the white balance by the color temperature. The higher the number, the more reddish the image and the lower the number, the more bluish the image. 0*2 (Color Filter) Achieves the effect of CC (Color Compensation) filters for photography. Based on using the set color temperature as the standard, the color can be compensated to G (Green) or M (Magenta). *1 The value is the color temperature value currently selected. *2 The value is the color filter value currently selected.
Note • The message “Custom WB error” indicates that the value is beyond the expected range. (When the flash is used on a subject in close proximity or a subject with a bright color is in the frame.) If you register this value, the indicator turns yellow on the recording information display on the LCD monitor. You can shoot at this point, but it is recommended that you set the white balance again to get a more correct white balance value.
Selecting the drive mode This camera has seven drive modes, such as single-shot advanced, and continuous advanced. Use them to suit your purpose. Shooting single shot This mode is for normal shooting. button t (Single-shot Adv.) Note • When the exposure mode is set to [Sports Action] in Scene Selection, you cannot shoot single shot. Shooting continuously The camera records the images continuously at the following speeds*.
The maximum number of continuous shots The number of continuous shooting images obtainable has an upper limit. DSLR-A580 DSLR-A560 Fine 44 images 27 images Standard 45 images 47 images RAW & JPEG 20 images 7 images RAW 22 images 7 images To shoot continuously at higher speeds The camera shoots continuously at a maximum of seven images per second. The exposure and focus are set at the first shot. button t (Speed Priority Cont.
To cancel the self-timer Press the button. Notes • When you shoot images using the viewfinder, use the eyepiece cover (page 34). • Do not aim the lens at the sun during the 2-second self-timer. The heat of the sun burns the shutter curtain and this results in shutter curtain damage. Shooting images with the exposure shifted (Exposure bracket) Base exposure – direction + direction Bracket shooting allows you to shoot several images, each with different degrees of exposure.
Notes • When the mode dial is set to M, the exposure is shifted by adjusting the shutter speed. • When you adjust the exposure, the exposure is shifted based on the compensated value. • The bracket cannot be used when the exposure mode is set to AUTO or Scene Selection. The EV scale in bracket shooting Ambient light* bracket 0.3 steps, three shots Exposure compensation 0 Flash bracket 0.7 steps, three shots Flash compensation –1.0 Shown in the top row. Shown in the bottom row.
Shooting with white balance shifted (WB bracket) Based on the selected white balance, and the color temperature/color filter, three images are recorded with the white balance shifted. 1 button t (WB bracket) t Select the desired setting • When Lo is selected, it is shifted by 10 mired*, and when Hi is selected, it is shifted by 20 mired. 2 Adjust the focus and shoot the subject. * Mired: a unit to indicate the color conversion quality in color temperature filters.
Using the viewing function Playing back images The last recorded image is displayed on the LCD monitor. 1 Press the button. DISP button button 2 Select an image with b/B on the controller. Using the viewing function To return to the shooting mode Press the button again. To switch the recording data display Press the DISP button. Each time you press the DISP button, the screen changes as follows.
Note • When you play back the image on a TV or a computer, the image will be displayed in the portrait position even if [Manual Rotate] is selected. To scroll panoramic images Select a panoramic image, then press the center of the controller. Pressing it again pauses the playback. 3D Sweep Panorama images cannot be scrolled. Scrolling playback is not available for images that were recorded with [3D Pan.: Image Size] set to [16:9].
To select the date of movies to be played back Movies are stored by date. MENU button t date 2 t [Select Date] t Select the desired Note • Movies recorded with other devices may not be played back on this camera. Rotating an image 1 Display the image you want to rotate, then press the button. button The image is rotated counter-clockwise. When you want to do another rotation, repeat step 2. • Once you rotate the image, the image is played back in the rotated position, even if you turn off the power.
Enlarging images A still image can be enlarged for closer examination. This is convenient to check the focus condition of a recorded image. 1 Display the image you want to enlarge, then press the button. button 2 Zoom the image in or out with the button or button. • Rotating the control dial switches the image at the same display magnification. When you shoot multiple images with the same composition, you can compare their focus conditions.
Switching to the display of the image list 1 Press the button. button The screen changes to the image index screen. 2 Press the DISP button repeatedly to select the desired screen format. • The screen changes in the following order: 9 images t 4 images DISP button To turn to the movie index screen To display movies on the image index screen, select (movie) on the tab with b/B/v/V on the controller, then press the center of the controller.
To end in the middle of the slide show Press the center of the controller. To choose the interval between the images in slide show MENU button t 1 t [Slide Show] t [Interval] t Select the desired number of seconds To play back repeatedly MENU button t 1 t [Slide Show] t [Repeat] t [On] To play back movies You cannot play back still images and movies in the same slide show. Switch to a movie playback with [Still/Movie Select], then select the movie type.
Checking the information of recorded images Each time you press the DISP button, the information display changes (page 123).
B Display Indication 2010 1 1 10:37AM Date of recording Auto HDR image warning (110) 1/125 Shutter speed (75) F3.
Histogram display A B Display Indication Display Memory card (27) Histogram* (104) Still image 100-0003 Indication Exposure mode (61 – 80) PAS M Image size of still images (140)/Aspect ratio of still images (142)/Image size of Sweep Shooting (141) 1/125 Shutter speed (75) F3.5 Aperture (72) ISO200 ISO sensitivity (108) Image quality of still images (142) –0.3 Exposure compensation (103) –0.
Display Indication 2010 1 1 10:37AM Date of recording 3/7 File number/total number of images * When the image has a high-key or low-key portion, that portion is flashed on the histogram display (Luminance limit warning).
Protecting images (Protect) You can protect images against accidental erasure. Protecting selected images/canceling the protection of the selected images 1 MENU button t 1 t [Protect] t [Multiple Img.] 2 Select the image you want to protect with b/B on the controller, then press the center of the controller. - 3 To protect other images, repeat step 2. 4 Press the MENU button. 5 Select [Enter] with v, then press the center of the controller.
Deleting images (Delete) Once you have deleted an image, you cannot restore it. Check whether to delete the image or not beforehand. Note • Protected images cannot be deleted. Deleting the image that is currently displayed 1 Display the image you want to delete and press the button. button 2 Select [Delete] with v on the controller, then press the center of the controller. Deleting the selected images 1 MENU button t 1 t [Delete] t [Multiple Img.
5 Select [Delete] with v, then press the center of the controller. Deleting all the images in the folder Deletes all still images in the folder. This appears during still image playback only. 1 MENU button t 1 t [Delete] t [All in Folder] 2 Select [Delete] with v on the controller, then press the center of the controller. Deleting all the movies with the same date 1 MENU button t 1 t [Delete] t [All in Date Rng.] 2 Select [Delete] with v on the controller, then press the center of the controller.
Viewing images on a TV screen To view images recorded on the camera on a TV set, an HDMI cable (sold separately) and an HD TV equipped with an HDMI connector are required. 1 Turn off both your camera and the TV, and connect the camera to the TV. 1 To the HDMI connector HDMI cable (sold separately) 2 To the HDMI terminal 2 Turn on the TV and switch the input. • See also the operating instructions supplied with the TV. 3 Turn on the camera. Images shot with the camera appear on the TV screen.
• Do not connect the output connector of the device with the HDMI terminal on the camera. This may cause a malfunction. On “PhotoTV HD” This camera is compatible with the “PhotoTV HD” standard. By connecting Sony’s PhotoTV HD-compatible devices using an HDMI cable, a whole new world of photos can be enjoyed in breathtaking Full HD quality. “PhotoTV HD” allows for a highly-detailed, photo-like expression of subtle textures and colors.
The items for Sync Menu Slide Show Plays back images automatically (page 127). 1 Image Display Returns to the single-image screen. Still/Movie Select Selects still images or movies to be played back. Image Index Switches to the image index screen. 3D Viewing Plays back 3D-images when connected to a 3D-compatible TV. Select Folder Selects the folder of images to be played back. Select Date Selects the date of movies to be played back. Delete Deletes images.
PAL-N system (1080 50i) Argentina, Paraguay, Uruguay SECAM system (1080 50i) Bulgaria, France, Greece, Guiana, Iran, Iraq, Monaco, Russia, Ukraine, etc.
Changing your setup Setting image size and image quality Image: Size MENU button t size 1 t [Image: Size] t Select the desired [Image: Aspect Ratio]: [3:2] DSLR-A580 Image size Usage guidelines L:16M 4912 × 3264 pixels For prints up to A3+ size M:8.4M 3568 × 2368 pixels For prints up to A4 size S:4.0M 2448 × 1624 pixels For prints L/2L size DSLR-A560 Image size Usage guidelines L:14M 4592 × 3056 pixels For prints up to A3+ size M:7.4M 3344 × 2224 pixels For prints up to A4 size S:3.
Setting the size of panoramic images You can set the image size of panoramic images. The image size varies depending on the setting of the shooting direction (page 68). MENU button t 2 t [Panorama: Size] or [3D Pan.: Image Size] t Select the desired size [Panorama: Size] (Standard) (Wide) Vertical: 3872 × 2160 Horizontal: 8192 × 1856 Vertical: 5536 × 2160 Horizontal: 12416 × 1856 [3D Pan.
Image: Aspect Ratio MENU button t desired ratio 1 t [Image: Aspect Ratio] t Select the 3:2 A normal ratio. 16:9 An HDTV ratio. Note • This item cannot be set when the exposure mode is set to Sweep Shooting. Image: Quality MENU button t setting (RAW) (RAW & JPEG) (Fine) (Standard) 142 1 t [Image: Quality] t Select the desired File format: RAW (Records using the RAW compression format.) This format does not perform any digital processing on the images.
Notes • This item cannot be set when the exposure mode is set to Sweep Shooting. • For details on the number of images that can be taken when the image quality is changed, see page 35. About RAW images You need the “Image Data Converter SR” software included on the CD-ROM (supplied) in order to open a RAW image recorded on this camera. With this software, a RAW image can be opened and converted to a common format, such as JPEG or TIFF, and its white balance, color saturation, contrast, etc.
Setting the method for recording on a memory card Selecting the method for assigning file numbers to images MENU button t setting 1 t [File Number] t Select the desired Series The camera does not reset numbers and assigns numbers to files in sequence until the number reaches “9999.” Reset The camera resets numbers in the following cases and assigns numbers to files from “0001.” When the recording folder contains a file, a number one higher than the largest number is assigned.
Creating a new folder You can create a folder in a memory card for recording images. A new folder is created with a number incremented one higher than the largest number currently used, and the folder becomes the current recording folder. A folder for still images and a folder for movies are created at the same time. MENU button t 1 t [New Folder] Notes • When you insert a memory card that was used with other equipment into the camera and shoot images, a new folder may be automatically created.
• Formatting may take several minutes depending on the memory card. Recovering image database When inconsistencies are found in the image database file of movies, caused by processing movies on computers, etc., movies on the memory card will not be played back in this form. If this happens, the camera repairs the file. MENU button t 1 t [Recover Image DB] t [Enter] Note • Use a sufficiently charged battery. Low battery power during repairing can cause damage to data.
Changing your setup Notes • Before using an Eye-Fi card, set up the wireless LAN access point and forwarding destination. For details, refer to the operating manual supplied with the Eye-Fi card. • Eye-Fi cards are sold in the U.S.A, Canada, Japan, and some countries in the EU (as of May in 2010). • For more information, please contact the manufacturer or vendor directly. • Eye-Fi cards can be used only in the countries/regions where they were purchased.
Changing the noise reduction setting Disabling the noise reduction during long exposure shootings When you set the shutter speed to a second or longer (Long exposure shooting), noise reduction is turned on for the same duration that the shutter is open. This is to reduce the grainy noise typical in a long exposure. When noise reduction is in progress, a message appears and you cannot take another picture. Select [On] to prioritize the image quality. Select [Off] to prioritize the timing of shooting.
Changing the function of the buttons Changing the operation of the AEL button The function of the AEL button can be selected from the following two functions: – Holding the locked exposure value by pressing the AEL button while the button is held down ([Hold]). – Holding the locked exposure value by pressing the AEL button until the button is pressed again ([Toggle]).
Changing other settings Setting the sound on/off Selects the sound produced when the shutter is locked, during self-timer countdown, etc. MENU button t setting 2 t [Audio signals] t Select the desired Removing the Help Guide from the screen You can turn off the Help Guide that is displayed when you operate the camera. This is convenient when you want to perform the next operation quickly.
Note • Correct metering cannot be achieved when you use lenses that do not provide a lens contact, such as the lens of an astronomical telescope. In such cases, adjust the exposure manually by checking it on the recorded image. Selecting the language MENU button t 1t[ Language] t Select the language Setting the demonstration playback of a movie You can set the camera to start the demonstration playback of a movie if you do not operate the camera for about one minute.
Setting the LCD monitor Setting the brightness of the LCD monitor The brightness of the LCD monitor is automatically adjusted to the surrounding lighting conditions using the light sensor (page 15). You can set the brightness of the LCD monitor manually. MENU button t setting 1 t [LCD Brightness] t Select the desired Notes • When it is set to [Auto], do not cover the light sensor with your hand and so on.
Keeping the LCD monitor tuned on while looking into the viewfinder When the LIVE VIEW/OVF switch is set to “OVF,” looking into the viewfinder turns off the LCD monitor. In the default setting, while looking into the viewfinder, the LCD monitor is turned off to prevent the battery pack from wearing down. If you want to turn on the LCD monitor while looking into the viewfinder, select [Off].
Confirming the version of the camera Displays the version of your camera. Confirm the version when a firmware update is released. MENU button t 2 t [Version] Note • An update can be performed only when the battery level is 50% or more. We recommend that you use a sufficient battery or the AC-PW10AM AC Adaptor (sold separately).
Resetting to the default You can reset the main functions of the camera. MENU button t 2 t [Reset Default] t [Enter] The items to be reset are as follows. Items Reset to Exposure compensation (103) ±0.0 Recording information display (42) Graphic Display Playback display (123) Single-image screen (with recording information) Drive mode (118) Single-shot Adv.
Items Reset to Movie: Size (141) 1920 × 1080 Movie: File Format (82) AVCHD Movie: Audio Rec. (83) On SteadyShot (59) On Panorama: Size (141) Standard Panorama: Direction (68) Right 3D Pan.: Image Size (141) Standard 3D Pan.: Direction (69) Right Flash control (106) ADI flash AF Illuminator (100) Auto AF method (91) Contrast AF Color Space (113) sRGB Long Exposure NR (148) On High ISO NR (148) Auto Custom menu Items Reset to Eye-Start AF (41) Off Func.
Items Reset to Specify Printing – Date Imprint (172) Off Volume Settings (124) 2 Playback Display (123) Auto Rotate Memory Card Tool menu Items Reset to File Number (144) Series Folder Name (144) Standard Form Setup menu Items Reset to LCD Brightness (152) Auto Power Save (LV) (150) 1 Min Power Save (OVF) (150) 10 Sec CTRL FOR HDMI (137) On On USB Connection (164) Mass Storage Upload Settings (146) On Audio signals (150) On Demo Mode (151) Off Changing your setup Help Guide
Viewing images on a computer Using with your computer Following applications are contained on the CD-ROM (supplied) to allow more versatile use of images shot with your camera. • Sony Image Data Suite “Image Data Converter SR” “Image Data Lightbox SR” • “PMB” (Picture Motion Browser) Note • “PMB” is not compatible with Macintosh computers. Recommended computer environment (Windows) The following computer environment is recommended when using the supplied software and importing images via a USB connection.
Recommended computer environment (Macintosh) The following computer environment is recommended when using the supplied software and importing images via a USB connection. OS (pre-installed) USB Connection: Mac OS X (v10.3, 10.4, 10.5, 10.6) “Image Data Converter SR Ver.3”/“Image Data Lightbox SR”: Mac OS X (v10.4, 10.5, 10.6 (Snow Leopard)) “Image Data Converter SR Ver.3” “Image Data Lightbox SR” CPU: Power PC G4/G5 series (1.
Using the software Installing the software (Windows) Log on as Administrator. 1 Turn on your computer, and insert the CD-ROM (supplied) into the CD-ROM drive. The installation menu screen appears. • If it does not appear, double-click [Computer] (For Windows XP: [My Computer]) t (SONYPMB) t [Install.exe]. • If the AutoPlay screen appears, select “Run Install.exe” and follow the instructions that appear on the screen to proceed with the installation. 2 Click [Install].
• If “PMB” has already been installed on the computer, and the version of the previously installed “PMB” is higher than that of the “PMB” on the CD-ROM (supplied), installation is not required. The usable functions are activated when the camera is connected to the computer using the USB cable. • If a version of “PMB” under 5.0.00 has been installed on your computer, you may be unable to use some functions of those “PMB” when installing the “PMB” from the supplied CD-ROM.
To use “Image Data Converter SR,” refer to Help. Click [Start] t [All Programs] t [Sony Image Data Suite] t [Help] t [Image Data Converter SR Ver.3]. “Image Data Converter SR” support page (English only) http://www.sony.co.jp/ids-se/ Using “Image Data Lightbox SR” With “Image Data Lightbox SR” you can do the following, etc.: • To display and compare RAW/JPEG images recorded with this camera. • To rate the images on a scale of five. • To set color labels and so on.
Notes • “PMB” is not compatible with Macintosh computers. • The confirmation message of the Information tool appears on the screen when starting “PMB” for the first time. Select [Start]. This function informs you of news, such as software updates. You can change the setting later. To use “PMB,” refer to “PMB Help.” Double-click the shortcut of (PMB Help) on the desktop. Or, click [Start] t [All Programs] t [PMB] t [PMB Help]. “PMB” support page (English only) http://www.sony.co.
Connecting the camera to the computer 1 Insert a sufficiently charged battery pack into the camera, or connect the camera to a wall outlet (wall socket) using the ACPW10AM AC Adaptor (sold separately). 2 Turn on the computer, then press the 3 Check that [USB Connection] in 4 Connect the camera to your computer. • When a USB connection is established for the first time, your computer automatically runs a program to recognize the camera. Wait for a while. (Playback) button. 1 is set to [Mass Storage].
File name Folder The type of file File name DCIM folder JPEG file DSC0ssss.JPG MP_ROOT folder JPEG file (Adobe RGB) _DSCssss.JPG RAW file DSC0ssss.ARW RAW file (Adobe RGB) _DSCssss.ARW MP4 file (1440 × 1080) MAH0ssss.MP4 MP4 file (VGA) MAQ0ssss.MP4 • ssss (file number) stands for any number within the range of 0001 to 9999. • When [Image: Quality] is set to [RAW & JPEG], the numerical portions of the name of a RAW data file and its corresponding JPEG file are the same.
Note • Use “iMovie” bundled with a Macintosh computer to import or operate AVCHD format movies. Deleting the USB connection Perform the procedures from step 1 to 3 below before: • Disconnecting the USB cable. • Removing the memory card. • Turning off the camera. 1 Double-click the disconnect icon Windows Vista on the tasktray. Windows XP Disconnect icon 2 Click (USB Mass Storage Device) t [Stop]. 3 Confirm the device on the confirmation window, then click [OK].
Creating a movie disc You can create a disc from AVCHD format movies recorded on the camera. Selecting the method for creating a disc Select the method that best suits your disc player. See “PMB Help” for details on creating a disc using “PMB.” To import movies, see page 164. Player Method Blu-ray disc playback devices (Blu-ray disc player, PlayStation®3, etc.) Create a Blu-ray disc of movies and photos imported to a computer using “PMB.
Characteristics of each type of disc A Blu-ray disc enables you to record high definition image quality (HD) movies of a longer duration than DVD discs. High definition image quality (HD) movie can be recorded on DVD media, such as DVD-R discs, and a high definition image quality (HD) disc is created. • You can play a high definition image quality (HD) disc on AVCHD format playback devices, such as a Sony Blu-ray disc player and a PlayStation®3. You cannot play the disc on ordinary DVD players.
Notes • Install “PMB” beforehand. • Still images and MP4 movie files cannot be recorded on the AVCHD format disc. • It may take a long time to create a disc. Playing AVCHD format disc on a computer You can play back AVCHD format discs using “Player for AVCHD” that is installed together with “PMB.” To start the software, click on [Start] t [All Programs] t [PMB] t [PMB Launcher] t [View] t [Player for AVCHD]. For detailed operations, see the Help for “Player for AVCHD.
Creating a standard definition image quality (STD) disc You can create a standard definition image quality (STD) disc from AVCHD format movies imported to a computer using supplied software “PMB.” 1 Select the AVCHD format movies you want to write on “PMB.” 2 Click (Create Discs) to select [Create DVD-Video Format Discs (STD)]. The screen used for creating a disc appears. • For details, see “PMB Help.” Notes • Install “PMB” beforehand. • MP4 movie files cannot be recorded on a disc.
Printing images Specifying DPOF Using the camera, you can specify the still images and the number of images to print before you print images at a shop or with your printer. Follow the procedure below. DPOF specifications are left with images after printing. It is recommended that you unspecify them after printing. Specifying /unspecifying DPOF on selected images 1 MENU button t 1 t [Specify Printing] t [DPOF Setup] t [Multiple Img.] 2 Select the image with b/B on the controller.
Dating images You can date images when printing them. The position of the date (inside or outside the image, character size, etc.) depends on your printer. MENU button t [On] 1 t [Specify Printing] t [Date Imprint] t Note • This function may not be provided, depending on the printer.
Others Specifications image sensor-shift mechanism [Auto focus system] Camera System [System] Camera Type Interchangeable Lens Digital Camera Lens A-mount lens [Image sensor] Image format DSLR-A580 23.5 mm×15.6 mm (APSC format) “Exmor” CMOS image sensor DSLR-A560 23.4 mm×15.6 mm (APSC format) “Exmor” CMOS image sensor Total pixel number of image sensor DSLR-A580 Approx. 16 700 000 pixels DSLR-A560 Approx. 14 600 000 pixels [SteadyShot] System Image sensor-shift mechanism Effect Approx. 2.
[Focus check Live View] equivalent with F1.4 lens) DSLR-A560 –2 EV to 16 EV on all metering modes (ISO 100 equivalent with F1.4 lens) Image format Image sensor for shooting Frame coverage Approx. 100% [LCD monitor] LCD panel 7.5 cm (3.
[Recording format] File format JPEG (DCF Ver. 2.0, Exif Ver. 2.3, MPF Baseline) compliant, DPOF compatible Movie (AVCHD format) AVCHD Ver. 1.0 compliant Video: MPEG-4 AVC/ H.264 Audio: Dolby Digital 2ch, equipped with Dolby Digital Stereo Creator • Manufactured under license from Dolby Laboratories. Movie (MP4 format) Video: MPEG-4 AVC/ H.264 Audio: MPEG-4 AAC-LC 2ch Dimensions Approx. 137 mm × 104 mm × 84 mm (5 1/2 inches × 4 1/8 inches × 3 3/8 inches) (W/H/D, excluding protrusions) Mass Approx.
Rechargeable battery pack NP-FM500H Used battery Lithium-ion battery Maximum voltage DC 8.4 V Nominal voltage DC 7.2 V Maximum charge voltage DC 8.4 V Maximum charge current 2.0 A Capacity Typical 11.8 Wh (1 650 mAh) Minimum 11.5 Wh (1 600 mAh) Maximum dimensions Approx. 38.2 mm × 20.5 mm × 55.6 mm (1 9/16 inches × 13/16 inches × 2 1/4 inches) (W/ H/D) Mass Approx. 78 g (2.8 oz) Design and specifications are subject to change without notice.
• Intel, Intel Core, MMX, and Pentium are trademarks or registered trademarks of Intel Corporation. • SDXC, SDHC Logo are trademarks of SD-3C, LLC. • Eye-Fi is a trademark of Eye-Fi Inc. • MultiMediaCard is a trademark of MultiMediaCard Association. • “PlayStation” is a registered trademark of Sony Computer Entertainment Inc. • Adobe is a registered trademark or a trademark of Adobe Systems Incorporated in the United States and/or other countries.
Troubleshooting If you experience trouble with your camera, try the following solutions. Check the items on pages 178 to 186. Consult your Sony dealer or local authorized Sony service facility. 1 Check the following items. 2 Remove the battery pack, and insert the battery pack again after about one minute, and turn on the power. 3 Reset the settings (page 155). 4 Consult your Sony dealer or local authorized Sony service facility. Battery pack and power The battery pack cannot be installed.
The power turns off suddenly. • If you do not operate the camera for given period of time, the camera turns to power saving mode and nearly shuts down. To cancel the power save, operate the camera, such as pressing the shutter button halfway down (page 150). The CHARGE lamp flashes when charging the battery pack. • You can use an NP-FM500H battery pack only. Make sure that the battery is NP-FM500H. • If you charge a battery pack that has not been used for a long time, the CHARGE lamp may flash.
The screen of the viewfinder is dark. • The battery pack is discharged. Install a charged battery pack (page 18). A red light is reflected on the right side in the viewfinder • When you press the shutter button halfway down to focus on a dark subject, AF areas may be lit in red automatically. In such a case, a red light is reflected on the right side in the viewfinder. This is not a malfunction. The shutter does not release.
Eye-Start AF does not work. • Set [Eye-Start AF] to [On] (page 41). • Press the shutter button halfway down. The flash does not work. • The flash mode is set to [Autoflash]. If you want to make sure the flash fires without fail, set the flash mode to [Fill-flash] (page 98). The flash takes too long to recharge. • The flash has been fired in succession in a short period. When the flash has been fired in succession, the recharging process may take longer than usual to avoid overheating of the camera.
lenses may cause the periphery of the image to appear too dark (insufficient light). The eyes of the subject come out red. • Activate the red eye reduction function (page 100). • Get close to the subject, and shoot the subject within the flash range using the flash (page 100). Dots appear and remain on the LCD monitor. • This is not a malfunction. These dots are not recorded (page 7). • You may reduce the effect of these issues using the “Pixel mapping” function.
Deleting/Editing images Your camera cannot delete an image. • Cancel the protection (page 133). You have deleted an image by mistake. • Once you have deleted an image, you cannot restore it. We recommend that you protect images that you do not want to delete (page 133). You cannot mark a DPOF mark. • You cannot mark DPOF marks on RAW images. Computers You do not know if the OS of your computer is compatible with the camera. • Check “Using with your computer” (page 158).
The image cannot be played back on a computer. • If you are using “PMB,” refer to the “PMB Help.” • Consult the computer or software manufacturer. After making a USB connection, “PMB” does not start automatically. • Make the USB connection after the computer is turned on (page 164). Memory card Cannot insert a memory card. • Insertion direction of the memory card is wrong. Insert it in the correct direction (page 27). Cannot record on a memory card. • The memory card is full.
• When printing images using your own printer, cancel the trimming or borderless settings. Consult the printer manufacturer as to whether the printer provides these functions or not. • When having images printed at a digital print shop, ask the shop whether they can print the images without cutting off both edges. Cannot print images with the date. • Using “PMB,” you can print images with date (page 162). • This camera does not have a feature for superimposing dates on images.
The camera does not work properly. • Turn off the camera. Remove the battery pack and insert it again. If the camera is hot, remove the battery pack, and allow it to cool down before trying this corrective procedure. • If an AC Adaptor (sold separately) is used, disconnect the power plug. Connect the power plug and turn on the camera again. If the camera does not work after doing these solutions, consult your Sony dealer or local authorized Sony service facility.
Warning messages If the following messages appear, follow the instructions below. Incompatible battery. Use correct model. • An incompatible battery pack is being used. Set Area/Date/Time. • Set the area and date, time. If you have not used the camera for a long time, charge the internal rechargeable battery (pages 31, 190). If the message still appears, change the memory card. Memory Card Error • An incompatible memory card is inserted or the format has failed. Unable to read “Memory Stick” properly.
Processing... • When Long exposure noise reduction will be done for the same amount of time that the shutter was open. You cannot do any further shooting during this reduction. Camera overheating. Allow it to cool. • The camera has become hot because you have been shooting continuously. Turn the power off. Cool the camera and wait until the camera is ready to shoot again. Unable to display. • Images recorded with other cameras or images modified with a computer may not be able to be displayed.
Camera Error System Error • Turn the power off, remove the battery pack, then re-insert it. If the message appears frequently, consult your Sony dealer or local authorized Sony service facility. Image Database File error. Reboot. • There is something wrong occurred in the Image Database File. Execute [Recover Image DB] (page 146). Image Database File error. Recover? • You cannot record or play back AVCHD format movies because the Image Database File is damaged.
Precautions On operating temperatures Do not use/store the camera in the following places Your camera is designed for use under the temperatures between 0°C and 40°C (32°F and 104°F). Shooting in extremely cold or hot places that exceed this range is not recommended. • In an extremely hot, dry or humid place In places such as in a car parked in the sun, the camera body may become deformed and this may cause a malfunction.
This rechargeable battery is continually charged as long as you are using the camera. However, if you use the camera for only short periods, it discharges gradually, and if you do not use the camera at all for about 3 months it becomes completely discharged. In this case, be sure to charge this rechargeable battery before using the camera. However, even if this rechargeable battery is not charged, you can still use the camera as long as you do not record the date and time.
• Clean the flash surface before use. The heat of flash emission may cause dirt on the flash surface to become discolored or to stick to the flash surface, resulting in insufficient light emission. • Keep the camera, supplied accessories, etc., out of the reach of children. A memory card, etc., may be swallowed. If such a problem occurs, consult a doctor immediately.
AVCHD format The AVCHD format is a high definition digital video camera format used to record a high definition (HD) signal of either the 1080i specification*1 or the 720p specification*2 using efficient data compression coding technology. The MPEG-4 AVC/H.264 format is adopted to compress video data, and the Dolby Digital or Linear PCM system is used to compress audio data. The MPEG-4 AVC/H.
3D-shootings Notes on recording • [3D Panorama] is not suitable when shooting: – Subjects are moving. – Subjects are too close to the camera. – Subjects with a repeating pattern such as tiles, and subjects with little contrast such as sky, sandy beach, or lawn. • [3D Panorama] recording may be discontinued in the following situations: – You pan or tilt the camera too fast or too slow. – There is too much camera shake.
Index Index Numerics C 3D....................................... 69, 194 Center weighted ....................... 107 Charging battery pack ................ 18 Cleaning mode ........................... 38 Color filter................................ 115 Color Space .............................. 113 Color temperature .................... 115 Compression ratio .................... 142 Continuous AF ........................... 88 Continuous bracket .................. 120 Continuous shooting ...............
D-Range Optimizer ..................109 Drive mode ...............................118 G E H Enlarged image .........................126 EV scale......................78, 103, 121 Exposure .....................................70 Exposure compensation............103 Exposure mode ...........................70 Eye-Fi .......................................146 Eyepiece sensors.........................41 Eye-Start AF ...............................41 Hand-held Twilight....................
Memory card.............................. 27 “Memory Stick PRO Duo” ........ 27 Menu .......................................... 52 Metering mode ......................... 107 Moisture condensation ............. 190 Movie Audio Rec....................... 83 Movie File Format ..................... 82 Multi Frame Noise Reduct....... 108 Multi segment .......................... 107 N New Folder .............................. 145 Night Portrait ............................. 63 Night View........................
Spot...........................................107 SteadyShot function....................59 Sunset .........................................63 Sweep Panorama ................66, 141 Sweep Shooting ..........................66 U USB connection........................164 V Version .....................................154 Viewing image..........................123 Viewing images on a TV screen ..............................................136 W White balance ...........................
Notes on the License “C Library”, “Expat”, “zlib”, “dtoa”, “pcre”, and “libjpeg” software are provided in the camera. We provide this software based on license agreements with their owners of copyright. Based on requests by the owners of copyright of these software applications, we have an obligation to inform you of the following. Please read the following sections. Read “license1.pdf” in the “License” folder on the CD-ROM.