Interchangeable Lens Digital Camera Instruction Manual
Table Of Contents
- Notes on using your camera
- Table of Contents
- Preparing the camera
- Before your operation
- Shooting images
- Using the shooting function
- Selecting the focus method
- Detecting faces
- Using the flash
- Adjusting the brightness of the image (Exposure, Flash compensation, Metering)
- Shooting with fixed brightness (AE Lock)
- Using brightness compensation for the entire image (Exposure compensation)
- Adjusting the amount of flash light (Flash Compensation)
- Selecting the flash control mode to set the amount of flash light (Flash control)
- Selecting the method for measuring the brightness of a subject (Metering Mode)
- Setting ISO
- Compensating for the brightness and contrast automatically (D-Range)
- Image processing
- Adjusting the color tones (White balance)
- Selecting the drive mode
- Using the viewing function
- Changing your setup
- GPS setting (SLT-A55V only)
- Setting image size and image quality
- Setting the method for recording on a memory card
- Changing the noise reduction setting
- Changing the function of the buttons
- Changing other settings
- Setting the LCD monitor/electronic viewfinder
- Confirming the version of the camera
- Resetting to the default
- Viewing images on a computer
- Printing images
- Others
- Index
135
Using the viewing function
• Do not connect the output connector of the device with the HDMI terminal on the
camera. This may cause a malfunction.
On “PhotoTV HD”
This camera is compatible with the “PhotoTV HD” standard.
By connecting Sony’s PhotoTV HD-compatible devices using an HDMI
cable, a whole new world of photos can be enjoyed in breathtaking Full HD
quality.
“PhotoTV HD” allows for a highly-detailed, photo-like expression of
subtle textures and colors.
On “<BRAVIA> Photo Map” (SLT-A55V only)
This camera is compatible with the “<BRAVIA> Photo Map” standard.
By connecting the camera to a TV that supports “<BRAVIA> Photo Map”
using a USB cable, you can display the shooting location on the map when
the image is recorded with the location information.
To view 3D-images with a 3D-compatible TV
If you connect the camera to a 3D-compatible TV using an HDMI cable
(sold separately), you can play back 3D-images recorded with the 3D
Sweep Panorama mode automatically. For details on 3D-shooting, see page
198. Also refer to the operating instructions supplied with the TV.
MENU button t 1 t [3D Viewing]