Interchangeable Lens Digital Camera Instruction Manual
Table Of Contents
- Notes on using your camera
- Table of Contents
- Preparing the camera
- Before your operation
- Shooting images
- Using the shooting function
- Selecting the focus method
- Detecting faces
- Using the flash
- Adjusting the brightness of the image (Exposure, Flash compensation, Metering)
- Shooting with fixed brightness (AE Lock)
- Using brightness compensation for the entire image (Exposure compensation)
- Adjusting the amount of flash light (Flash Compensation)
- Selecting the flash control mode to set the amount of flash light (Flash control)
- Selecting the method for measuring the brightness of a subject (Metering Mode)
- Setting ISO
- Compensating for the brightness and contrast automatically (D-Range)
- Image processing
- Adjusting the color tones (White balance)
- Selecting the drive mode
- Using the viewing function
- Changing your setup
- GPS setting (SLT-A55V only)
- Setting image size and image quality
- Setting the method for recording on a memory card
- Changing the noise reduction setting
- Changing the function of the buttons
- Changing other settings
- Setting the LCD monitor/electronic viewfinder
- Confirming the version of the camera
- Resetting to the default
- Viewing images on a computer
- Printing images
- Others
- Index
185
Others
You do not know if the OS of your computer is compatible with the
camera.
• Check “Using with your computer” (page 159).
Your computer does not recognize your camera.
• Check that the camera is turned on.
• When the battery level is low, install the charged battery pack (page 18), or
use the AC Adaptor (sold separately).
• Use the USB cable (supplied) (page 165).
• Disconnect the USB cable, and connect it again firmly.
• Set [USB Connection] to [Mass Storage] (page 165).
• Disconnect all equipment other than the camera, the keyboard and the
mouse from the USB jacks of your computer.
• Connect the camera directly to your computer without passing through a
USB hub or other device (page 165).
You cannot copy images.
• Make the USB connection by properly connecting the camera with your
computer (page 165).
• Follow the designated copy procedure for your OS (page 165).
• When you shoot images with a memory card formatted by a computer, you
may not be able to copy the images to a computer. Shoot using a memory
card formatted by your camera (page 146).
The image cannot be played back on a computer.
• If you are using “PMB,” refer to the “PMB Help.”
• Consult the computer or software manufacturer.
After making a USB connection, “PMB” does not start automatically.
• Make the USB connection after the computer is turned on (page 165).
Cannot insert a memory card.
• Insertion direction of the memory card is wrong. Insert it in the correct
direction (page 20).
Computers
Memory card