Operation Manual

22 Part 2. Preparation
DIP Switch Positions
(for the AITe260, AITe260V, AITe130, AITe130V, AITe90, and
AITe90V Drives)
Default
ON
OFF
12345678
Emulation Mode
*
To enable Emulation Mode, set DIP switches 1 to 4 [Drive Mode] to ON.
ON
OFF
12345678
*
Emulation Mode for the AITe260/AITe260V drives return the following as
the Product Identification field of the Inquiry command.
SDX-700C
*
Emulation Mode for the AITe130/AITe130V drives return the following as
the Product Identification field of the Inquiry command.
SDX-500C
*
Emulation Mode for the AITe90/AITe90V drives return the following as the
Product Identification field of the Inquiry command.
SDX-400C
Terminator Power
To enable terminator power, set DIP switch 5 [Terminator Power] to ON.
ON
OFF
12345678
1 Drive Mode (OFF)
2 Drive Mode (OFF)
3 Drive Mode (OFF)
4 Drive Mode (OFF)
5 Terminator Power (ON)
6 Periodic Cleaning Req
(OFF)
7 DC Control (1) (ON)
8 DC Control (2) (OFF)