Operation Manual

38 Appendix
Specifications (AITe130/AITe130V)
■ Performance
Storage Capacity 130 GB compressed (with SDX2-50C)
*
50 GB uncompressed (with SDX2-50C)
Bit Error Rate less than 10
-17
Data Transfer Rate 6 MB/s uncompressed
15.6 MB/s compressed
*
Burst Data Transfer Rate 12 MB/s maximum, asynchronous
(SCSI) 40 MB/s maximum, synchronous
Initialize Time less than 5 seconds
Load Time average of 14 seconds
**
Unload Time average of 20 seconds
**
Rewind Time average of 105 seconds (with SDX2-50C)
**
■ Operating Environment
Operating Temperature: 10 to 35 °C (∆T<10 °C / h)
(50 to 95 °F (∆T<18 °F / h))
Humidity: 30 to 80% (no condensing)
Maximum wet bulb temperature: 26 °C (78.8 °F)
Non-operating Temperature: –40 to 70 °C (∆T<20 °C / h)
(–40 to 158 °F (∆T<36 °F / h))
Humidity: 10 to 90% (∆RH<30% / h)
Maximum wet bulb temperature: 45 °C (113 °F)
■ Power Supply & Miscellaneous
Power Supply 100 V to 240 V AC, 50/60 Hz
1.2 A
Case Dimensions 198 × 64.5 × 246 mm (W × H × D)
(excluding protruding parts)
Weight 2.4 kg
Specifications may be subject to change, in the interest of technological
improvement, without notice or obligation.
*
This is assuming 2.6:1 compression ratio.
The degree of data compression attained while recording data varies according to system
environment and data type.
**
No retries.