Operating Instructions Super Audio CD/DVD RECEIVER AVD-S10

C/X/x/c/ENTER

AMP MENU

To specify the size, distance, position and height of the speakers

1 Press AMP MENU repeatedly to display 9 SP. SETUP on the front panel display.

2 Sit in your listening position and select the item to be set using X/x.

• Items set in 9 SP. SETUP

–Size of 5 speakers (front L/R, centre, rear L/R)

–with or without the subwoofer

–Distance of the front, rear, and centre speakers

–Position and height of the rear speakers

3 Set the parameter using C/c.

The selected parameter will appear on the front panel display.

4 Repeat Steps 2 and 3 to set other parameters in 9 SP. SETUP.

If you do not operate the remote for a few seconds, the parameter turns off and is stored in

the receiver.

xSIZE

When you do not connect centre or rear speakers, or move the rear speakers, set the parameters

for F.SP., C.SP., R.SP., and S.W. The default settings are underlined.

• F.SP. (front speaker)

–

LARGE: Normally select this.

–SMALL: Select this if the small speakers are used for the front speaker.

• C.SP. (centre speaker)

–

LARGE: Normally select this.

–SMALL: Select this if the small speaker is used for the centre speaker.

–NO: Select this if no centre speaker is used.