Operating Instructions Super Audio CD/DVD RECEIVER AVD-S10

Enjoying Movies
53
GB
BIT RATE
05
10
kbps
Mbps
384
To close the ADVANCED window
Select “OFF” in Step 3.
To turn off the Control Menu
Press DVD DISPLAY repeatedly until the
Control Menu is turned off.
Displays of each item
By pressing DVD DISPLAY repeatedly, you
can display either “BIT RATE” or
“LAYER,” whichever was selected in
“ADVANCED.”
BIT RATE
When playing MPEG audio sound tracks
Bit rate refers to the amount of video/audio
data per second in a disc. When the bit rate
level is high, there is a large amount of data.
However, this does not always mean that
you can get higher quality pictures or
sounds.
LAYER
Indicates the approximate point where the
disc is playing.
If it is a dual-layer DVD, the receiver
indicates which layer is being read (“Layer
0” or “Layer 1”).
For details on the layers, see page 76
(DVD).
Checking the Play
Information (ADVANCED)
You can check information such as the bit
rate or the disc layer that is being played.
While playing a disc, an approximate bit
rate of the playback picture is always
displayed as Mbps (Mega bit per second)
and the audio as kbps (kilo bit per second).
1 Press DVD DISPLAY during
playback.
The Control Menu is displayed.
2 Press X/x to select
(ADVANCED), then press ENTER.
The options for ADVANCED appear.
3 Press X/x to select the items.
For each item, please refer to
“Displays of each item.”
• BIT RATE: displays the bit rate.
• LAYER: displays the layer and the
pick-up point.
4 Press ENTER.
Audio
Video
Appears when the DVD
has dual layers
Audio
Video
1 8
(
3 4
)
1 2
(
2 7
)
T 1 : 3 2 : 5 5
BIT RATE
DVD
BIT RATE
05
10
kbps
Mbps
384
OFF
BIT RATE
LAYER
BIT RATE
05
10
kbps
Mbps
0
1000
DVD DISPLAY
ENTER
X/x