User Manual

45
Controlling Remote Cameras
Basic Operations
Controlling Remote
Cameras
You can control and perform adjustments for cameras
connected to the unit via VISCA cable, and save the
adjustments as presets to be recalled later.
To control a camera, you must assign the VISCA camera
as an input source in the [Input] list and perform
configurations to enable remote control beforehand. For
details, see “Remote Camera Connections and Settings”
on page 82.
Controlling Cameras
1 In the [Input] list of the main screen, select the camera
input source you want to control and display its video
in the [NEXT] viewer.
The [Camera] tab appears in the sub screen.
2 Tap the [Camera] tab.
The [Camera] screen appears.
3 Perform pan/tilt, zoom, iris, and other operations
while viewing the video in the [NEXT] viewer.
Enabled
Displayed
Pan/tilt (page 46)
Zoom (page 46)
Backlight compensation (page 46)
Camera settings (page 46)
Iris (page 46)
White balance (One Push)
(page 46)
Focus
(page 46)