4-265-166-11(1) Blu-ray Disc/DVD Home Theatre System Operating Instructions BDV-EF200
WARNING Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. To reduce the risk of fire, do not cover the ventilation opening of the apparatus with newspapers, tablecloths, curtains, etc. Do not place the naked flame sources such as lighted candles on the apparatus. To reduce the risk of fire or electric shock, do not expose this apparatus to dripping or splashing, and do not place objects filled with liquids, such as vases, on the apparatus.
disposal service or the shop where you purchased the product. Notice for customers: the following information is only applicable to equipment sold in countries applying EU directives. The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany.
• “Wi-Fi CERTIFIED™” and “WiFi Protected Setup™” are trademarks of the Wi-Fi Alliance. • “PhotoTV HD” and the “PhotoTV HD” logo are trademarks of Sony Corporation. • MPEG Layer-3 audio coding technology and patents licensed from Fraunhofer IIS and Thomson. • iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.
Table of Contents About These Operating Instructions ....... 4 Unpacking ............................................... 6 Index to Parts and Controls.....................7 Getting Started Step 1: Installing the System....... 12 Step 2: Connecting the System... 13 Step 3: Connecting to the Network.................................... 19 Step 4: Performing the Easy Setup........................................ 21 Step 5: Selecting the Source ....... 22 Step 6: Enjoying Surround Sound.........................
Unpacking • Front speakers (2) • FM wire antenna (aerial) (1) • Dock for iPod/iPhone (TDM-iP30) (1) or • Video cord (1) • USB cable (1) • Subwoofer (1) • Remote commander (remote) (1) • R6 (size AA) batteries (2) • • • • Operating Instructions Quick Setup Guide Speaker Installation Guide Software License Information Preparing the remote Insert two R6 (size AA) batteries (supplied) by matching the 3 and # ends on the batteries to the markings inside the compartment.
Index to Parts and Controls For more information, refer to the pages indicated in parentheses. Front panel FUNCTION VOLUME A Disc tray (page 25) x (stop) B Remote sensor Stops playback and remembers the stop point (resume point). The resume point for a title/track is the last point you played or the last photo for a photo folder. C Front panel display D (USB) port (page 26) Used for connecting a USB device. E Play operation buttons Z (open/close) (page 25) Opens or closes the disc tray.
Front panel display About the indications in the front panel display A Displays the system’s playing status. E Lights up when muting is on. B Lights up when repeat play is activated. F Displays the system’s status, such as radio frequency, etc. C Lights up when stereo sound is received. (Radio only) G Lights up when outputting 720p/1080i/ 1080p video signals from the HDMI (OUT) jack.
Rear panel ONLY FOR SS-TSB105 ONLY FOR SS-WSB103 DIGITAL IN OPTICAL L ANTENNA OUT ARC IN 1 AUDIO IN IN 2 R FRONT R FRONT L SUBWOOFER SPEAKERS VIDEO OUT LAN (100) TV FM COAXIAL 75 AUDIO A SPEAKERS jacks (page 13) F LAN (100) terminal (page 19) B G HDMI (IN 2) jack (page 16) (USB) port (page 26) C AUDIO (AUDIO IN L/R) jacks (page 16) H HDMI (IN 1) jack (page 16) D ANTENNA (FM COAXIAL 75Ω) jack (page 18) I HDMI (OUT) jack (page 14) J VIDEO OUT jack (page 14) E TV (DIGITAL IN OPTICAL
B Number buttons (pages 35, 38) Remote control Enters the title/chapter numbers, preset station number, etc. (audio) (pages 32, 33) SPEAKERS TV AUDIO Selects the audio format/track. TV 1 BRAVIA Sync DIMMER 1 2 3 4 5 6 7 8 9 SLEEP 9 FUNCTION 2 C Color buttons (red/green/yellow/blue) 0 3 POP UP/ MENU TOP MENU (subtitle) (page 48) Selects the subtitle language when multilingual subtitles are recorded on a BDROM/DVD VIDEO.
F Playback operation buttons See “Playback” (page 25). ./> (previous/next) Skip to the previous/next chapter, track, or file. (replay/advance) Briefly replay the current scenes for 10 seconds./Briefly fast forwards the current scenes for 15 seconds. m/M (fast/slow/freeze frame) Fast reverse/fast forward the disc during playback. Each time you press the button, the search speed changes. Activates slow-motion play when pressed for more than one second in pause mode.
Getting Started Getting Started Step 1: Installing the System How to position the system Install the system by referring to the illustration below. A B C A Front speaker (L (left)) B Front speaker (R (right)) C Subwoofer D Unit D • Use caution when placing the speakers and/or speaker stands attached to the speakers on a specially treated (waxed, oiled, polished, etc.) floor, as staining or discoloration may result. • Do not lean or hang on a speaker, as it may fall down.
Step 2: Connecting the System • When you connect another component with a volume control, turn down the volume of the other components to a level where sound is not distorted. Connecting the speakers To connect speaker cords to the unit Connect the speaker cords to match the color of the SPEAKERS jacks of the unit. When connecting to the unit, insert the connector until it clicks.
Getting Started Connecting the TV Connect the system to your TV to display the image of the system on your TV, and listen to TV sound via the system’s speakers. Depending on the jacks and functions on your TV, select the connection method.
A HDMI cable connection About Audio Return Channel If your TV is compatible with the Audio Return Channel function, an HDMI cable connection also sends a digital audio signal from the TV. You do not need to make a separate audio connection for listening to TV sound. For setting the Audio Return Channel function, see [Audio Return Channel] (page 49). B Video cord connection If your TV does not have an HDMI jack, make this connection.
Getting Started Connecting the other components When a component you wish to connect to the system has an HDMI (OUT) jack You can connect a component that has an HDMI (OUT) jack such as a set-top box/digital satellite receiver or PLAYSTATION®3, etc., with an HDMI cable. An HDMI cable connection can send both video and audio signals. By connecting the system and the component using an HDMI cable, you can enjoy high-quality digital picture and sound via the HDMI (IN 1) or HDMI (IN 2) jack.
When the component does not have an HDMI OUT jack TV Video out Component Audio out Signal flow System : Video signal : Audio signal If the component plays sound only, connect the audio output of the component to the system. Rear panel of the unit L AUDIO IN R AUDIO Red White : Signal flow Audio cord (not supplied) Red White L R AUDIO OUT To the audio out jacks of the VCR, digital satellite receiver, PlayStation, or portable audio source, etc.
Getting Started Connecting the antenna (aerial) Rear panel of the unit ANTENNA FM COAXIAL 75 or FM wire antenna (aerial) (supplied) • Be sure to fully extend the FM wire antenna (aerial). • After connecting the FM wire antenna (aerial), keep it as horizontal as possible. • If you have poor FM reception, use a 75-ohm coaxial cable (not supplied) to connect the unit to an outdoor FM antenna (aerial).
Step 3: Connecting to the Network Select the method based on your LAN (Local Area Network) environment. Rear panel of the unit 2 Internet 1 LAN (100) ADSL modem/ cable modem ETHER Broadband router WAN LAN 1 LAN 2 LAN 3 LAN 4 LAN cable (not supplied) USB Wireless LAN Adapter (not supplied) 1 Wired Setup Use a LAN cable to connect to the LAN (100) terminal on the unit. 2 USB Wireless Setup Use a wireless LAN via the USB Wireless LAN Adapter (Sony UWA-BR100* only).
Getting Started • The placement distance between the USB Wireless LAN Adapter and your wireless LAN router differs based on your usage environment. If the system cannot connect to the network or the network connection is unstable, move the USB Wireless LAN Adapter to a different position or place the USB Wireless LAN Adapter and the wireless LAN router closer to each other. • You can also get the information for network settings from the following Sony support page: For customers in Europe: http://support.
Depending on the connection method (page 14), perform the following setting. • HDMI cable connection: Follow the instructions that are displayed on the TV screen. • Video cord connection: Select [16:9] or [4:3] so that the picture is displayed correctly. Before performing Step 4 Make sure all connections are secure, and then connect the AC power cord (mains lead). Follow the Steps below to make the basic adjustments for using the system. Displayed items vary depending on the country model.
Getting Started Step 5: Selecting the Source You can select the playback source. FUNCTION 1 2 3 4 5 6 7 8 9 0 Press FUNCTION repeatedly until the desired function appears in the front panel display. Each time you press FUNCTION, the function changes as follows.
Step 6: Enjoying Surround Sound 1 2 3 4 5 6 7 8 9 0 X/x/c, OPTIONS Selecting surround settings based on your listening preference The setting method differs depending on the function. When playing via the “BD/DVD”* or “FM” function 1 Press OPTIONS. The option menu appears on the TV screen. 2 3 Press X/x to select [Surround Setting], then press . Press X/x repeatedly until the surround setting you want appears on the TV screen. See the table below for surround sound setting descriptions.
Getting Started • When the home menu is displayed on the TV screen, this setting can be changed by selecting the surround setting via [Surround Setting] in [Audio Settings] of [Setup] (page 48). About speaker output The default setting is [Auto] (“AUTO”). Surround setting Effect [Auto] “AUTO” The system outputs the sound with suitable effect automatically depending on the source. • 2 channel source: Outputs 2 channel sound as it is. • Multi-channel source: Simulates 7.1 or 5.
2 • Connect the system to a network (page 19). • Set [BD Internet Connection] to [Allow] (page 48). Playback Playing a Disc 1 2 3 The operation method differs depending on the disc. Refer to the operating instructions of the disc. Switch the input selector on your TV so that the signal from the system appears on your TV screen. Press Z, and place a disc on the disc tray. Insert a BD-ROM with BONUSVIEW/ BD-LIVE. Playback For playable discs, see “Playable Discs” (page 58).
Displaying the play information You can check the playback information, etc., by pressing DISPLAY. The displayed information differs depending on the disc type and system status. Example: when playing a BD-ROM Playing from a USB Device You can play video/music/photo files on the connected USB device. For playable types of files, see “Playable Types of Files” (page 59). 1 Connect the USB device to the (USB) port on the unit. Refer to the operating instructions of the USB device before connecting.
Enjoying an iPod/iPhone Front panel You can enjoy the music/video/photo and charge the battery of an iPod/iPhone via the system. Rear panel TV or The compatible iPod/iPhone models are as follows. Update your iPod/iPhone with the latest software before using with the system.
5 Press C/X/x/c and to select the file that you want to play. The sound from the iPod/iPhone is played on the system. When you play a video file, switch the input selector on your TV so that the signal from the iPod/iPhone appears on your TV screen. You can operate the iPod/iPhone using the buttons on the remote. For operation details of the iPod/iPhone, also refer to the operating instructions of the iPod/iPhone.
D Network transmission speed Playing via a Network E The next video file name F The currently selected video file name BRAVIA Internet Video serves as a gateway delivering selected Internet content and a variety of on-demand entertainment straight to your unit. Available Options Various settings and playback operations are available by pressing OPTIONS. The available items differ depending on the situation.
Items Details Items Details [Video Settings] • [Picture Quality Mode]: Selects the picture settings for different lighting environments. • [FNR]: Reduces the random noise appearing in the picture. • [BNR]: Reduces the mosaic-like block noise in the picture. • [MNR]: Reduces minor noise around the picture outlines (mosquito noise). [Slideshow BGM] • [Off]: Turns off the function. • [My Music from USB]: Sets the music files registered in [Add Slideshow BGM].
When playing via the “HDMI1,” “HDMI2,” “TV,” or “AUDIO” function 1 Press OPTIONS. 2 3 Press X/x repeatedly until “A/V SYNC” appears in the front panel display, then press or c. Playback The option menu appears in the front panel display. Press X/x to adjust the delay between the picture and sound. You can adjust from 0 ms to 300 ms in 25 ms increments. 4 Press . The setting is made. 5 Press OPTIONS. The option menu in the front panel display turns off.
Sound Adjustment Selecting the Effect to Suit the Source You can select a suitable sound mode for movies or music. 1 2 3 4 5 6 7 8 9 0 Selecting the Audio Format, Multilingual Tracks, or Channel When the system is playing a BD/DVD VIDEO recorded in multiple audio formats (PCM, Dolby Digital, MPEG audio, or DTS) or multilingual tracks, you can change the audio format or language.
x DVD-VR • [ Stereo (Audio1)] and [ Stereo (Audio2)] do not appear when only one audio stream is recorded on the disc. x CD • [ Stereo]: The standard stereo sound. • [ 1/L]: The sound of the left channel (monaural). • [ 2/R]: The sound of the right channel (monaural). • [ L+R]: The sound of both the left and right channels output from each individual speaker.
3 Tuner Adjust the volume by pressing 2 +/–. If an FM program is noisy Listening to the Radio You can enjoy radio sound with the system’s speakers. If an FM program is noisy, you can select monaural reception. There will be no stereo effect, but reception will improve. 1 Press OPTIONS. The option menu appears on the TV screen. "/1 FUNCTION 1 2 3 4 5 6 7 8 9 Number buttons 0 2 3 Press X/x to select [FM Mode], then press . Press X/x to select [Monaural]. • [Stereo]: Stereo reception.
Selecting the preset station 1 Press FUNCTION repeatedly until “FM” appears in the front panel display. Using the Radio Data System (RDS) The last received station is tuned in. 2 Press PRESET +/– repeatedly to select the preset station. • You can select the preset station number directly by pressing the number buttons. The Radio Data System (RDS) is a broadcasting service that allows radio stations to send additional information along with the regular program signal.
Other Operations Using the Control for HDMI Function for “BRAVIA” Sync This function is available on TVs with the “BRAVIA” Sync function. By connecting Sony components that are compatible with the Control for HDMI function via an HDMI cable, operation is simplified. • Some functions can only be used if the connected TV is compatible, and require prior setting via the TV. Refer to the operating instructions of the TV.
• Make sure that the component is connected to the system via an HDMI cable, and the Control for HDMI function of the connected component is set to on. The speakers in the illustration correspond to the following: 1Front left speaker (L) 2Front right speaker (R) 3Subwoofer 1 3 2 Setting the Speakers [Speaker Settings] 1 Press HOME. The home menu appears on the TV screen. 2 3 4 Press C/c to select [Front Left/Right] 3.0 m: Set the front speaker distance. [Subwoofer] 3.
3 4 5 6 7 Press X/x to select the desired speaker type, then press . Press C/c to select the left or right speaker, then press X/x to adjust the level. Press . Repeat Steps 3 to 5. Press RETURN. The system returns to the previous display. 8 9 Press X/x to select [Test Tone], then press . Press X/x to select [Off], then press . • The test tone signals are not output from the HDMI (OUT) jack. • To adjust the volume of all the speakers at one time, press 2 +/–.
Code numbers of controllable TVs If more than one code number is listed, try entering them one at a time until you find the code that works with your TV. Code number SONY 01 (default) LG 05 PANASONIC 06 PHILIPS 02, 03, 07 SAMSUNG 02, 08 TOSHIBA 04 You can connect to the Internet and enjoy websites like the Sony homepage using the system. 1 Prepare for Internet browsing. Connect the system to a network (page 19). 2 Press HOME. The home menu appears on the TV screen.
Internet Browser display Items Details [Browser Setup] Displays the Internet Browser settings. • [Zoom]: Increases or decreases the size of the displayed contents. • [JavaScript Setup]: Sets whether to enable or disable JavaScript. • [Cookie Setup]: Sets whether or not to accept browser cookies. • [SSL Alarm Display]: Sets whether to enable or disable SSL. [Input] Displays the software keyboard to enter characters while browsing a website.
Setting up the Network 4 Press X/x to select [Internet Settings], then press . The [Internet Settings] display appears. [Internet Settings] Before setting, connect the system to the network. For details, see “Step 3: Connecting to the Network” (page 19). To open the setting display 1 Press HOME. 2 3 4 5 6 7 8 9 • The [Internet Settings] items are necessary to connect to the Internet. Enter the respective (alphanumeric) values for your broadband router or Wireless LAN router.
4 Press X/x to select [Save & Connect], then press . 4 The system starts checking the network connection. 5 Manual setting 1 2 3 Press X/x to select [Wired Setup] on the [Internet Settings] display, then press . Press X/x to select [Custom], then press . 5 6 Press c. Press X/x to select [Save & Connect], then press . The system starts checking the network connection. 7 Press X/x to select the network setting type, then press .
4 Check that the message [Wi-Fi Protected Setup was successful.] appears, then press c. 4 When your wireless router is not compatible with the WPS function 2 Press X/x to select [USB Wireless Setup] on the [Internet Settings] display, then press . Press X/x to select [Scan], then press . The system searches for available wireless LANs, then the list of wireless LANs appears. 3 Press X/x to select the wireless LAN name, then press .
WEP WEP applies security to communications to prevent outsiders from intercepting communications or intruding into your wireless network. WEP is a legacy security technology that enables older device which do not support TKIP/AES to be connected. WPA-PSK (TKIP), WPA2-PSK (TKIP) TKIP is a security technology developed in response to the deficiencies of WEP. TKIP assures a higher security level than WEP.
Icon Settings and Adjustments Using the Setup Display You can make various adjustments of items such as picture and sound. Select (Setup) on the home menu when you need to change the settings of the system. The default settings are underlined. Explanation [Audio Settings] (page 47) Makes the audio settings according to the type of connecting jacks. [BD/DVD Viewing Settings] (page 48) Makes detailed settings for BD/ DVD playback.
For customers in other countries/regions: http://www.sony-asia.com/support During a software update, “UPDATING” appears in the front panel display. After the update completes, the main unit automatically turns off. Please wait for the software update to complete; do not turn the main unit on or off, or operate the main unit or TV. x [DVD Aspect Ratio] [Letter Box]: Displays a wide picture with black bands on the top and bottom.
[RGB]: Select this when connecting to a device with an HDCP-compliant DVI jack. x [HDMI Deep Colour Output] [Auto]: Normally select this. [16bit], [12bit], [10bit]: Outputs 16bit/12bit/ 10bit video signals when the connected TV is compatible with Deep Colour. [Off]: Select this when the picture is unstable or colors appear unnatural. x [Pause Mode] (BD/DVD VIDEO/DVD-R/ DVD-RW only) [Audio Settings] You can compress the dynamic range of the sound track.
x [Sound Effect] x [Subtitle] You can set the system’s sound effects (SOUND MODE and [Surround Setting]) to on/off. You can select the default subtitle language for BD-ROMs or DVD VIDEOs. When you select [Select Language Code], the display for entering the language code appears. Enter the code for your language by referring to “Language Code List” (page 62). [On]: Enables all of the system’s sound effects. The upper limit of sampling frequency is set to 48 kHz. [Off]: The sound effects are disabled.
replaced with different scenes. Follow the on-screen instructions and enter your four-digit password. [System Settings] You can make the system-related settings. x [Internet Video Parental Control] Playback of some Internet videos can be limited according to the age of the users. Scenes may be blocked or replaced with different scenes. Follow the on-screen instructions and enter your four-digit password.
x [Auto Standby] [On]: Turns on the [Auto Standby] function. When you do not operate the system for about 30 minutes, the system enters standby mode automatically. [Off]: Turns off the function. x [Auto Display] [On]: Automatically displays information on the screen when changing the viewing titles, picture modes, audio signals, etc. [Off]: Displays information only when you press DISPLAY. [Easy Setup] Re-runs the Easy Setup to make the basic settings. Follow the on-screen instructions.
On operation Additional Information Precautions On safety • To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the system, or place the system near water, such as near a bathtub or shower room. Should any solid object or liquid fall into the cabinet, unplug the system and have it checked by qualified personnel before operating it any further. • Do not touch the AC power cord (mains lead) with wet hands. Doing so may cause an electric shock.
On moving the system • Before moving the system, make sure that there is no disc inserted, and remove the AC power cord (mains lead) from the wall outlet (mains). Notes about the Discs On handling discs • To keep the disc clean, handle the disc by its edge. Do not touch the surface. • Do not stick paper or tape on the disc.
Troubleshooting If you experience any of the following difficulties while using the system, use this troubleshooting guide to help remedy the problem before requesting repairs. Should any problem persist, consult your nearest Sony dealer. Note that if service personnel changes some parts during repair, these parts may be retained. General Symptom Problems and solutions The power is not turned on. • Check that the AC power cord (mains lead) is connected securely. The remote does not function.
Picture Symptom Problems and solutions There is no picture. • Check the output method on your system (page 14). There is no picture when you make an HDMI cable connection. • The unit is connected to an input device that is not HDCP (High-bandwidth Digital Content Protection) compliant (“HDMI” on the front panel does not light up) (page 14). 3D images from the HDMI (IN 1) or HDMI (IN 2) jack do not appear on the TV screen. • Depending on the TV or video component, 3D images may not appear.
Symptom Problems and solutions There is no sound from the TV • Set [Control for HDMI] in [HDMI Settings] of [System Settings] to [On] via the HDMI (OUT) jack when (page 49). Also, set [Audio Return Channel] in [HDMI Settings] of [System using the Audio Return Channel Settings] to [Auto] (page 49). function. • Make sure that your TV is compatible with the Audio Return Channel function.
USB device Symptom Problems and solutions The USB device is not recognized. • Try the following: 1 Turn the system off. 2 Remove and reconnect the USB device. 3 Turn the system on. • Make sure that the USB device is securely connected to the (USB) port. • Check if the USB device or a cable is damaged. • Check if the USB device is on. • If the USB device is connected via a USB hub, disconnect it and connect the USB device directly to the unit.
USB wireless LAN connection Symptom Problems and solutions You cannot connect your PC to the Internet after [Wi-Fi Protected Setup (WPS)] is performed. • The wireless settings of the router may change automatically if you use the Wi-Fi Protected Setup function before adjusting the settings of the router. In this case, change the wireless settings of your PC accordingly. You cannot connect the system to your wireless LAN router. • Check if the wireless LAN router is on.
Playable Discs Blu-ray Disc BD-ROM1) BD-R/BD-RE2) DVD3) DVD-ROM DVD-R/DVD-RW DVD+R/DVD+RW CD3) CD-DA (Music CD) CD-ROM CD-R/CD-RW Super Audio CD 1)Since the Blu-ray Disc specifications are new and evolving, some discs may not be playable depending on the disc type and the version. Also, the audio output differs depending on the source, connected output jack, and selected audio settings. 2)BD-RE: Ver.2.1 BD-R: Ver.1.1, 1.2, 1.
Playable Types of Files Video File format Extensions MPEG-1 Video/PS1) “.mpg,” “.mpeg,” “.m2ts,” MPEG-2 Video/PS, TS1) “.mts” Xvid “.avi” MPEG4/AVC1) “.mkv,” “.mp4,” “.m4v,” “.m2ts,” “.mts” WMV91) “.wmv,” “.asf” AVCHD 2) • To avoid data corruption or damage to USB memory or other devices, turn the system off before connecting or removing USB memory or other devices. • The system may not play high bit rate video files from a DATA CD smoothly.
Supported Audio Formats Audio formats supported by this system are as follows. Format LPCM 2ch Function LPCM 5.1ch LPCM 7.1ch Dolby Digital Dolby TrueHD, Dolby Digital Plus DTS DTS-ES Discrete 6.1, DTS-ES Matrix 6.1, DTS96/24 DTS-HD High Resolution Audio DTS-HD Master Audio “BD/DVD” a a a a a a a a “HDMI1” “HDMI2” a – a – a – – – “TV” (DIGITAL IN) a – a – a – – – a: Supported format. –: Unsupported format.
Speakers Specifications Amplifier Section Video Section Outputs Mass (approx.) 85 mm × 220 mm × 95 mm (w/h/d) 0.5 kg Subwoofer (SS-WSB103) Dimensions (approx.) Mass (approx.) 260 mm × 265 mm × 270 mm (w/h/d) 3.8 kg General Power requirements Power consumption Dimensions (approx.) Mass (approx.) 220 V - 240 V AC, 50/60 Hz On: 95 W Standby: 0.3 W (at the Power Saving mode) 400 mm × 65 mm × 315 mm (w/h/d) incl. projecting parts 3.2 kg Design and specifications are subject to change without notice.
Language Code List The language spellings conform to the ISO 639: 1988 (E/F) standard.
Index Numerics H S 3D 25 3D Output Setting 46 HDMI YCbCr/RGB (HDMI) 46 HDMI Deep Colour Output 47 Screen Format 46 Screen Saver 50 Screen Settings 46 SLEEP 38 Slideshow 30 Sound Effect 48 Speaker Settings 37, 48 Distance 37 Level 37 Subtitle 48 Super Audio CD Playback Channels 49 Super Audio CD Playback Layer 49 Surround Setting 48 System Information 50 A A/V SYNC 30 Attenuate - AUDIO 47 Audio 48 Audio DRC 47 Audio Output 47 Audio Return Channel 49 Audio Settings 47 Auto Display 50 Auto Standby 50 B
The software of this system may be updated in the future. To find out details on any available updates, please visit the following URL. For customers in Europe: http://support.sony-europe.com For customers in Taiwan: http://www.sony-asia.com/support/tw For customers in other countries/regions: http://www.sony-asia.
