User manual

78
GB
Dimensions (approx.) 275 mm × 405 mm × 275
mm (w/h/d)
Mass (approx.) 7.5 kg
General
Power requirements 220 V - 240 V AC,
50/60 Hz
Power consumption On: 110 W
Standby: 0.3 W (at the
Power Saving mode)
Dimensions (approx.) 430 mm × 83 mm × 355
mm (w/h/d) incl.
projecting parts such as the
wireless transceiver slot;
430 mm × 83 mm × 384
mm (w/h/d) incl. the
wireless transceiver
(EZW-RT10)
Mass (approx.) 5.3 kg
Surround amplifier (TA-SA200WR)
Amplifier Section
POWER OUTPUT (rated) 80 W + 80 W (at 3 ohms, 1
kHz, 1% THD)
POWER OUTPUT (reference)
167 W (per channel at 3
ohms, 1 kHz)
Rated impedance 3 - 16 Ω
General
Power requirements 220 V - 240 V AC,
50/60 Hz
Power consumption On: 50 W
Standby power consumption
1 W (standby mode)
0.18 W (turned off)
Dimensions (approx.) 206 mm × 60 mm × 256
mm (w/h/d) with the
wireless transceiver
inserted
Mass (approx.) 1.3 kg
Wireless transceiver (EZW-RT10/EZW-
RT10A)
Communication system S-AIR Specification
version 1.0
Frequency band 2.4000 GHz - 2.4835 GHz
Modulation method DSSS
Power requirements DC 3.3 V, 350 mA
Dimensions (approx.) 50 mm × 13 mm × 60 mm
(w/h/d)
Mass (approx.) 24 g
Design and specifications are subject to change
without notice.
• Standby power consumption 0.3W (main unit),
0.18W (surround amplifier).
• Halogenated flame retardants are not used in the
certain printed wiring boards.
• Over 85% power efficiency of amplifier block is
achieved with the full digital amplifier, S-Master.