Operating instructions

75
GB
BDV-N9100W/BDV-N9100WL/BDV-N8100W/BDV-N7100W/BDV-N7100WL
4-456-335-12(1)
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF
01)\4456335121_GB (CE)\100ADD.fm
masterpage: Right
Additional Information
The system cannot connect to the
network or the network connection is
unstable.
t Check if the wireless LAN router is on.
t Check the network connection
(page 25) and the network settings
(page 65).
t Depending on the usage environment,
including the wall material, radio wave
reception conditions, or obstacles
between the system and the wireless
LAN router, the possible
communication distance may be
shortened. Move the system and the
wireless LAN router closer to each
other.
t Devices that use a 2.4 GHz frequency
band, such as a microwave, Bluetooth,
or digital cordless device, may
interrupt communication. Move the
main unit away from such devices, or
turn off such devices.
t The wireless LAN connection may be
unstable depending on the usage
environment, especially while using
the Bluetooth function of the system.
In this case, adjust the usage
environment.
The wireless router you want is not
shown in the wireless network list.
t Press RETURN to return to the
previous screen, and try [Wireless
Setup(built-in)] again. If the wireless
router you want is still not detected,
select [Add a new address.] from the
network list, then select [Manual
Registration] to input a network name
(SSID) manually.
Pairing cannot be done.
t Move the Bluetooth device closer to
the main unit.
t Pairing may not be possible if other
Bluetooth devices are present around
the main unit. In this case, turn off the
other Bluetooth devices.
t Delete the system from your Bluetooth
device and perform pairing again
(page 35).
Connecting cannot be done.
t The pairing registration information
has been erased. Perform the pairing
operation again (page 35).
There is no sound.
t Make sure this system is not too far
from the Bluetooth device, or this
system is not receiving interference
from a Wi-Fi network, other 2.4 GHz
wireless device, or microwave oven.
t Check that the Bluetooth connection is
made properly between this system
and the Bluetooth device.
t Pair this system and the Bluetooth
device again.
t Keep the system away from metal
objects or surfaces.
t Make sure “BT” function is selected.
t Adjust the volume of the Bluetooth
device first, if the volume level is still
too low, adjust the volume level on the
main unit.
The sound skips or fluctuates, or the
connection is lost.
t The main unit and the Bluetooth device
are too far apart.
t If there are obstacles between the main
unit and your Bluetooth device,
remove or avoid the obstacles.
Bluetooth device