User Guide

8
3 Replace the memory card slot cover
and tighten the fastening screw with a
Phillips screwdriver.
Using slide show playback
When a CF card which contains still images
taken with a digital still camera is inserted
into the BKM-FW50, JPEG format still
image files will be automatically detected,
and the images will be shown on the
display as a slide show. (The input signal
for the display must be set to OPTION 1
RGB at this time. For details, consult the
operating instructions of the display.)
In addition, the BKM-FW50 is set to
automatically display any still image or
video slide show saved on the CF card, as
the factory default.
Note
When inserting a Memory Stick Duo into
the BKM-FW50, insert it into a
commercially available Memory Stick Duo
to CF adaptor first.
Detailed control of playback
method
When the display is connected to a network
via the BKM-FW50, any still image or
video file stored on the CF card can be
shown on the display. For information on
settings and operation in this case, see the
section “Computer Operation” (page 11).
Removing the CF card
Note
When the access indicator is lit, images are
being stored or read. Never eject a CF card
or turn the power off during this time.
Doing so may result in damage to data or
the CF card itself.
1 Remove the memory card slot cover
fastening screw with a Phillips
screwdriver.
2 Press the eject button to remove the
CF card.
3 Replace the memory card slot cover
and tighten the fastening screw with a
Phillips screwdriver.
Playback of Still Images or Video From a CF Card
Insert the CF card completely into the slot,
aliging the label with the arrow facing as
shown.