Instruction Manual

22
GB
Table of
contents
Operation
Search
Settings
Search
Index
Charging the camera
The camera’s battery is continuously charged whenever the camera is connected to a running
computer.
1 Press the ON/OFF (Power) button to turn off
the camera.
2 Slide the multi-connector cover knob in
the direction of the arrow as illustrated
and open the multi-connector cover.
3 Slide the USB jack knob.
The Built-in USB arm comes out as shown in the illustration.
4 Connect the camera to the computer that
is turned on.
The charge lamp lights up in orange, and charging
starts.
When the charge lamp turns off, charging is finished.
• The charge lamp may turn off when the temperature is
outside of the recommended operating temperature
(10°C to 30°C (50°F to 86°F)).
• The charge icon is displayed on the LCD screen when
charging is started. However, the icon disappears after a
while.
• If the battery level is low (low battery), the charge icon
may not be displayed on the LCD screen. In this case,
check if the charge lamp is lighting up.
• If the charging lamp does not light correctly, reconnect
the camera to the computer.
ON/OFF (Power)
button
Built-in USB
arm
USB jack knob
Charge
lamp
Continued r