3-875-096-61(1) Wireless Stereo Headset DR-BT140Q ©2008 Sony Corporation Operating Instructions US Mode d’emploi FR
WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To reduce the risk of electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. To reduce the risk of fire, do not cover the ventilation of the apparatus with newspapers, tablecloths, curtains, etc. And do not place lighted candles on the apparatus.
For the customers in the Canada RECYCLING LITHIUM-ION BATTERIES Table Of Contents Lithium-Ion batteries are recyclable. You can help preserve our environment by returning your used rechargeable batteries to the collection and recycling location nearest you. For more information regarding recycling of rechargeable batteries, call toll free 1-800-822-8837, or visit http://www.rbrc.org/ What is Bluetooth wireless technology? ..................
What is Bluetooth wireless technology? Bluetooth® wireless technology is a short-range wireless technology that enables wireless data communication between digital devices, such as a computer or digital camera. Bluetooth wireless technology operates within a range of about 10 meters (about 30 feet). Connecting two devices as necessary is common, but some devices can be connected to multiple devices at the same time.
Welcome! Thank you for purchasing this Sony Wireless Stereo Headset. This unit uses Bluetooth wireless technology. • Enjoy music wirelessly from Bluetooth Stereo-enabled music players and mobile phones.*1 • Talk hands-free with Bluetooth technology-enabled mobile phones.*2 • Enjoy basic remote control operation (play, stop, etc.) of music player functions via Bluetooth connection.*3 • Bluetooth version 2.0 + EDR*4 for higher quality audio with less interference and lower power consumption.
3 steps to Bluetooth function Pairing First, register (“pair”) a Bluetooth device (mobile phone, etc.) and this unit with each other. Once pairing is established, there is no need for pairing again. Bluetooth mobile phone, etc. Wireless Stereo Headset Pairing c Page 10 - 11 V V Listening to music Calling Bluetooth connection Bluetooth connection Operate the Bluetooth device to make the Bluetooth connection.
GETTING STARTED Location and Function of Parts 1 Jog switch 7 RESET button Controls various functions when listening to music. Push this button when this unit does not operate properly. Pairing information is not deleted by this operation. 2 Indicator (red) Indicates the power status of the unit. 3 Indicator (blue) Indicates the communication status of the unit. 4 VOL (Volume) – button 5 VOL (Volume) +* button 6 POWER button 8 Microphone 9 Multi function button Controls various call functions.
Charging the unit The unit contains a rechargable Lithium-Ion battery, which should be charged before using for the first time. 1 Connect the supplied AC power adaptor to the DC IN 3 V jack on the unit. To an AC outlet AC power adaptor (supplied) To DC IN 3 V jack Tips • If the AC power adaptor is connected to an AC outlet while the unit is turned on, the unit will be turned off automatically. • This unit cannot be turned on while charging. 8 (red) lights up while charging.
Notes • If the battery is not used for a long time, battery may be quickly depleted, however, after a few recharges, battery life will improve. • If the life of the built-in rechargeable battery drops to half the normal length, the battery should be replaced. Consult your nearest Sony dealer for replacement of the rechargeable battery. • Avoid exposure to temperature extremes, direct sunlight, moisture, sand, dust or mechanical shock. Never leave in a car parked in the sun.
Pairing What is pairing? Bluetooth devices need to be “paired” with each other beforehand. Once Bluetooth devices are paired, there is no need for pairing again, except in the following cases: • Pairing information is deleted after repair, etc. • This unit is paired with 9 or more devices. This unit can be paired with up to 8 devices; if a new device is paired after 8 devices have been paired, the device whose latest connection time is the oldest among the 8 paired devices is replaced by the new one.
3 Perform pairing procedure on the Bluetooth device to detect this unit. The list of detected devices appears on the display of the Bluetooth device. This unit is displayed as “DR-BT140Q.” If “DR-BT140Q” is not displayed, repeat from step 1. Notes • For details, refer to the operating instructions supplied with the Bluetooth device.
Wearing the unit 1 Place the tip of the 2 Adjust the cord of the unit. hanger at the upper base of the ear and push it down along the back of the ear. You can adjust the cord by using the cord slider. Wear the housing marked R in your right ear and the one marked L in your left ear. Tip After using this unit, you can bundle up it with the cord slider.
Indications of Bluetooth function B : Indicator (blue) R : Indicator (red) B R Connectable – – B R – – – – – – – – – ... Connecting B R – – – – – – – – – – – – – – – – – – – – ... ... Phone Music Connected Pairing Flashing patterns Searching Connecting Status HFP/HSP or A2DP B (standby for receiving audio signal) – – – – – – – – – – – – – – – ... – ... – – – – – – – – – – – – – – ... – – R – HFP/HSP and A2DP B – – – – – – – – – – ...
OPERATING THE UNIT Listening to music When not calling with this unit, do not make the last connected Bluetooth device ready for HFP or HSP connection. To make or receive a call while playing back music, see page 20. VOL – button VOL + button POWER button 2 Make the Bluetooth connection (A2DP) from a Bluetooth device to this unit. > Refer to the operating instructions supplied with the Bluetooth device on how to operate it. Nx . Check the following before operating the unit.
To adjust the volume Press the VOL +/– button while listening to the music. Tips • Depending on the Bluetooth device, it may be necessary to adjust the volume on the connected Bluetooth device as well. • Volume for calling and listening to music can be adjusted independently. Even if you change the volume while calling, the volume for music playback does not change. • The volume level on this unit may vary depending on the connected Bluetooth device.
Tip Depending on the Bluetooth device, the fast-forward or fast-rewind operation can be done by performing the following procedures on this unit. 1 Press and hold the POWER button for about 2 seconds to turn off the unit. 2 Press and hold the POWER button and jog switch (Nx) for about 7 seconds. The indicator (blue) flashes once. The setting can be released by repeating the above procedures. At this time, the indicator (blue) flashes twice.
Calling VOL – button VOL + button When this unit does not connect to a Bluetooth mobile phone automatically POWER button You can make a connection by operating Bluetooth mobile phone or by operating this unit to connect the last connected Bluetooth device. Multi function button Check the following before operating the unit. – The Bluetooth function is active on the mobile phone. – Pairing of this unit and the Bluetooth mobile phone is complete.
B To make a connection with the last connected Bluetooth device by operating this unit 1 Press the multi function button. When listening to music with this unit, a Bluetooth connection cannot be made with the multi function button. To call To adjust the volume 1 Use the buttons on your Press the VOL +/– button. Note mobile phone when making a call. If no dial tone is heard on this unit, press and hold the multi function button for about 2 seconds.
Controlling the Bluetooth mobile phone – HFP, HSP The operation of the buttons on this unit varies depending on your mobile phone. HFP (Hands-free Profile) or HSP (Headset Profile) is used for Bluetooth mobile phone. Refer to the operating instructions supplied with your Bluetooth mobile phone on supported Bluetooth profiles or how to operate. *1 Some functions may not be supported depending on the Bluetooth mobile phone. Refer to the operating instructions supplied with your mobile phone.
Calling while playing back music The Bluetooth connection using HFP or HSP as well as A2DP is necessary to make a call while playing back music. For example, to make a call using a Bluetooth mobile phone while listening to music on a Bluetooth compatible music player, this unit needs to be connected to the mobile phone using HFP or HSP. Make a Bluetooth connection between this unit and the device in use following the procedures outlined below.
ADDITIONAL INFORMATION Precautions On Bluetooth communication • Bluetooth wireless technology operates within a range of about 10 meters (about 30 feet). Maximum communication range may vary depending on obstacles (human body, metal, wall, etc.) or electromagnetic environment. • The antenna is built into the right housing as illustrated in the dotted line. The sensitivity of the Bluetooth communication will improve by placing a connected Bluetooth device on your right side.
On the supplied AC power adaptor • Use the AC power adaptor supplied with this unit. Do not use any other AC power adaptor since it may cause the unit to malfunction. Polarity of the plug • If you are not going to use this unit for a long time, unplug the AC power adaptor from the AC outlet. To remove the AC power adaptor from the wall outlet, grasp the adaptor plug itself; never pull the cord.
Troubleshooting If you run into any problems using this unit, use the following checklist and read the product support information on our website. Should any problem persist, consult your nearest Sony dealer. Common The unit is not turned on. The correspondence distance is short. (Sound skips.) , Bring this unit and the Bluetooth device closer together.
When listening to music No sound , Check that both this unit and the Bluetooth device are turned on. , A2DP Bluetooth connection is not made between this unit and the Bluetooth device. Make an A2DP Bluetooth connection (page 14). , Check that music is being played back by the Bluetooth device. , Check that the volume of the unit is not set too low. , Turn up the volume on the connected device if necessary. , Pair this unit and Bluetooth device again (page 10).
Initializing the unit You can reset this unit to its default (such as volume setting) and delete all pairing information. 1 If this unit is turned on, press and hold the POWER button for about 2 seconds to turn off this unit. 2 Press and hold the POWER button and multi function button together for about 7 seconds. The indicator (blue) and indicator (red) flash together four times, and this unit is reset to the default setting. All pairing information is deleted.
Specifications General Communication System Bluetooth Specification version 2.0 + EDR*1 Output Bluetooth Specification Power Class 2 Power source DC 3.7 V: Built-in lithium-ion rechargeable battery Frequency band 2.4 GHz band (2.4000 GHz – 2.4835 GHz) Mass Approx. 53 g (1.9 oz) Modulation method FHSS Receiver Supported Codecs*4 SBC*5, MP3 Supported content protection method SCMS-T Transmission range (A2DP) 20 – 20,000 Hz (Sampling frequency 44.
US
AVERTISSEMENT Afin de réduire les risques d’incendie ou de choc électrique, n’exposez pas cet appareil à la pluie ni à l’humidité. N’installez pas l’appareil dans un espace restreint, comme une bibliothèque ou un meuble encastré. Cet appareil est conforme à la section 15 de la réglementation FCC ainsi qu’à la RSS-Gen de la réglementation IC.
Pour les utilisateurs au Canada RECYCLAGE DES ACCUMULATEURS AUX IONS Table des matières DE LITHIUM Qu’est-ce que la technologie sans fil Bluetooth? .................... 4 Félicitations! ..................... 5 Les accumulateurs aux ions de lithium sont recyclables. Vous pouvez contribuer à préserve l’environnement en rapportant les piles usées dans un point de collection et recyclage le plus proche.
Qu’est-ce que la technologie sans fil Bluetooth? La technologie Bluetooth® est une technologie sans fil à courte portée permettant la communication de données sans fil entre des appareils numériques, tels qu’un ordinateur ou un appareil photo numérique. La technologie sans fil Bluetooth fonctionne dans un rayon d’environ 10 mètres (environ 30 pi). La connexion de deux appareils est courante et certains appareils permettent également de se connecter simultanément à plusieurs périphériques.
Félicitations! Nous vous remercions d’avoir fait l’acquisition de ce casque stéréo sans fil Sony. Cet appareil utilise la technologie sans fil Bluetooth. • Ecoutez de la musique sans fil avec un lecteur de musique stéréo et un téléphone portable compatibles avec la technologie Bluetooth.*1 • Conversez en mode mains libres avec un téléphone portable compatible avec la technologie Bluetooth.*2 • Commandez à distance les fonctions basiques d’un lecteur de musique (lecture, arrêt, etc.
Fonction Bluetooth en 3 étapes Pairage Etablissez tout d’abord une liaison (« pairage ») entre un périphérique Bluetooth (téléphone portable, etc.) et l’appareil. Une fois le pairage établi, il n’est plus nécessaire de procéder à cette opération par la suite. Téléphones portables Bluetooth, etc. Casque stéréo sans fil c Page 10 - 11 Pairage V V Ecouter de la musique Appel Connexion Bluetooth Connexion Bluetooth Utilisez le périphérique Bluetooth pour établir la connexion Bluetooth.
PRÉPARATION Emplacement et fonction des pièces 1 Commutateur Jog Contrôle différentes fonctions lors de l’écoute de musique. 2 Témoin (rouge) Indique l’état d’alimentation de l’appareil. 3 Témoin (bleu) Indique le statut de communication de l’appareil. 4 5 6 7 Touche VOL (volume) – Touche VOL (volume) +* Touche POWER Touche RESET Appuyez sur cette touche si l’appareil ne fonctionne pas correctement. Les informations de pairage ne sont pas supprimées par cette opération.
Mise en charge de l’appareil L’appareil contient une pile au lithium-ion rechargeable, qui doit être chargée avant la première utilisation. 1 Raccordez l’adaptateur secteur fourni à la prise DC IN 3 V de l’appareil. Vers une prise secteur Adaptateur secteur (fourni) 2 Assurez-vous que le témoin (rouge) s’allume pendant le chargement. Casque stéréo sans fil Vers la prise DC IN 3 V La charge commence dès que l’adaptateur secteur est raccordé à une prise secteur.
Dans ce cas, mettez de nouveau la pile à charger dans la plage de température mentionnée ci-dessus. Si le problème persiste, consultez votre revendeur Sony le plus proche. Remarques • Si la pile reste inutilisée pendant une période prolongée, elle peut s’épuiser rapidement mais après plusieurs charges, l’autonomie de la pile s’améliore. • Si l’autonomie de la pile rechargeable intégrée chute à la moitié de la durée normale, elle doit être remplacée. Pour cela, contactez votre revendeur Sony le plus proche.
Pairage Qu’est-ce que le pairage? Les périphériques Bluetooth doivent préalablement être « jumelés ». Une fois que le pairage de ces appareils Bluetooth est réalisé, il n’est plus nécessaire de procéder à cette opération par la suite, à l’exception des cas suivants: • Les informations de pairage sont supprimées après une réparation, etc. • Cet appareil est jumelé avec 9 périphériques ou plus. Cet appareil peut être jumelé avec 8 périphériques au maximum.
3 Exécutez une procédure 5 Si un code de pairage sur le périphérique Bluetooth pour que cet appareil soit détecté. d’authentification* est requis sur l’écran d’un périphérique Bluetooth, saisissez « 0000 ». La liste des périphériques détectés apparaît sur l’écran du périphérique Bluetooth. Cet appareil est identifié par « DR-BT140Q ». Si « DRBT140Q» ne s’affiche pas, recommencez à l’étape 1. Le pairage est terminé lorsque le témoin (bleu) clignote lentement.
Mise en place de l’appareil 1 Placez l’extrémité du tour d’oreille sur la partie supérieure de l’oreille, puis faites-le passer derrière l’oreille. 2 Réglez la longueur du cordon de l’appareil. Vous pouvez régler la longueur du cordon à l’aide de son système coulissant. Placez l’écouteur portant le repère R sur votre oreille droite et l’écouteur portant le repère L sur votre oreille gauche. Conseil Après avoir utilisé l’appareil, vous pouvez le ramasser à l’aide du système coulissant du cordon.
Indications des fonctions Bluetooth B : Témoin (bleu) R : Témoin (rouge) B R Connexion possible – – B R – – – – – – – – – ... Connexion en cours B R – – – – – – – – – – – – – – – – – – – – ... ... Connecté Pairage Motifs de clignotement Recherche Connexion Statut HFP/HSP ou A2DP B R – HFP/HSP et A2DP – B R – (attente d’un signal audio entrant) Musique – – – – – – – – – – – – – – – – – (attente d’un signal audio entrant) – – – – – – – – – – – – ... – ... – – – – – ...
UTILISATION DE L’APPAREIL Ecouter de la musique Touche VOL – Touche VOL + Touche POWER > Nx . Vérifiez les points suivants avant d’utiliser l’appareil. – Le périphérique Bluetooth est sous tension. – Le pairage de cet appareil et du périphérique Bluetooth est terminé. – Le périphérique Bluetooth prend en charge la fonction de transmission de musique (profil: A2DP*). 1 Maintenez la touche POWER enfoncée pendant environ 2 secondes lorsque l’appareil est hors tension.
Remarques • Lorsque vous lisez des fichiers de musique en raccordant l’appareil à un périphérique Bluetooth à l’aide du profil HSP (Headset Profile), la qualité du son n’est pas excellente. Pour obtenir un son de meilleure qualité, passez la connexion Bluetooth au profil A2DP à l’aide du périphérique Bluetooth. • Si l’appareil est mis hors tension lorsqu’une connexion Bluetooth avec le profil A2DP a été établie, reprenez la procédure à partir de l’étape 1 pour établir de nouveau la connexion Bluetooth A2DP.
*1 En fonction du périphérique Bluetooth source, il peut s’avérer nécessaire d’appuyer deux fois sur la touche. *2 Certains périphériques Bluetooth peuvent ne pas fonctionner. Contrôle du son périphérique – AVRCP Si le périphérique audio Bluetooth connecté à cet appareil prend en charge le profil AVRCP (Audio Video Remote Control Profile), vous pouvez utiliser les touches de l’appareil pour les commandes. Reportez-vous au mode d’emploi fourni avec le périphérique Bluetooth concernant son utilisation.
Appel Touche VOL – Touche VOL + Touche POWER Lorsque l’appareil ne se connecte pas automatiquement à un téléphone portable Bluetooth Touche multifonctions Vous pouvez établir une connexion en demandant au téléphone portable Bluetooth ou à cet appareil de se connecter au dernier périphérique Bluetooth connecté. Vérifiez les points suivants avant d’utiliser l’appareil. – La fonction Bluetooth est activée sur le téléphone portable.
B Pour établir une connexion avec le dernier périphérique Bluetooth connecté à partir de cet appareil Pour recevoir un appel 1 Appuyez sur la touche multifonctions de l’appareil. multifonctions. Le témoin (bleu) et le témoin (rouge) se mettent à clignoter en même temps et l’appareil effectue l’opération de connexion pendant environ 5 secondes. Remarque Lors de l’écoute de musique avec cet appareil, la connexion Bluetooth ne peut pas être effectuée à l’aide de la touche multifonctions.
Pour mettre fin à un appel HFP (Hands-free Profile) Vous pouvez mettre fin à un appel en appuyant sur la touche multifonctions de l’appareil. Statut Veille Pour arrêter l’utilisation 1 Mettez fin à la connexion Bluetooth à l’aide du téléphone portable Bluetooth. 2 Maintenez la touche POWER enfoncée pendant 2 secondes environ pour mettre l’appareil hors tension. Le témoin (bleu) et le témoin (rouge) s’allument en même temps, et l’appareil se met hors tension.
Passer un appel tout en écoutant de la musique La connexion Bluetooth avec le profil HFP ou HSP ainsi que le profil A2DP est nécessaire pour passer un appel tout en écoutant de la musique. Par exemple, pour passer un appel avec le téléphone portable Bluetooth tout en écoutant de la musique sur un lecteur de musique compatible Bluetooth, cet appareil doit être connecté au téléphone portable avec le profil HFP ou HSP.
INFORMATIONS COMPLÉMENTAIRES Précautions Communication Bluetooth • La technologie sans fil Bluetooth fonctionne dans un rayon d’environ 10 mètres (environ 30 pi). La portée de communication maximum peut varier selon les obstacles (personne, métal, mur, etc.) ou l’environnement électromagnétique. • L’antenne est intégrée dans l’écouteur droit de l’appareil, comme illustré par la ligne pointillée.
• La connexion ne peut pas être garantie avec tous les périphériques Bluetooth. – Un périphérique doté de la fonction Bluetooth est nécessaire pour être en conformité avec la norme Bluetooth spécifiée par Bluetooth SIG, Inc. et être authentifié. – Même si le périphérique raccordé est conforme à la norme Bluetooth précédemment mentionnée, certains périphériques risquent de ne pas se connecter ou de ne pas fonctionner correctement, selon leurs caractéristiques ou spécifications.
Dépannage Si vous rencontrez un problème pendant l’utilisation de votre appareil, utilisez la liste de contrôles suivante et consultez les informations techniques relatives au produit sur notre site Web. Si le problème persiste, contactez votre revendeur Sony. Commun L’appareil ne se met pas sous tension. , Rechargez la pile de l’appareil. , L’appareil ne se met pas sous tension pendant le chargement. Débranchez l’appareil de l’adaptateur secteur puis mettez l’appareil sous tension.
Pendant l’écoute de musique Pas de son , Vérifiez que cet appareil ainsi que le périphérique Bluetooth sont sous tension. , La connexion Bluetooth A2DP n’est pas établie entre cet appareil et le périphérique Bluetooth. Etablissez une connexion Bluetooth A2DP (page 16). , Vérifiez que le périphérique Bluetooth lit les fichiers de musique. , Vérifiez que le volume de l’appareil n’est pas trop faible. , Augmentez le volume sur le périphérique connecté, si nécessaire.
Pendant les appels Impossible d’entendre la voix de l’interlocuteur. , Vérifiez que cet appareil ainsi que le téléphone portable Bluetooth source sont sous tension. , Vérifiez le raccordement entre cet appareil et le téléphone portable Bluetooth. Etablissez de nouveau une connexion Bluetooth (HFP ou HSP) (page 17). , Vérifiez que la sortie du téléphone portable Bluetooth est réglée pour cet appareil. , Vérifiez que le volume de l’appareil n’est pas trop faible.
Spécifications Généralités Système de communication Spécifications Bluetooth version 2.
27 FR
28 FR
29 FR
Printed in Malaysia (1)