User guide Bluetooth® Music Receiver BM10
Contents Accessory overview.......................................................................3 Basics.............................................................................................4 Pairing and connecting................................................................. 5 Disconnecting and reconnecting..................................................6 Smart Connect............................................................................... 7 Legal information...........................
Accessory overview 1. Stereo connectors (Left/ Right) Insert stereo cables to connect the device to a stereo. 2. Micro USB port Insert charger cable to power on the device. 3. Notification light Flashing blue light indicates the device is visible to other Bluetooth® devices or is being reconnected. Stable blue light indicates the device is connected to your phone. Stable white light indicates the device is ready for reconnection. 4.
Basics To power on the music receiver 1 2 Plug one end of the charger cable into the charger. Plug the other end of the cable into the Micro USB port of the music receiver. A white notification light illuminates briefly to indicate that the device is powered on. The music receiver only works when connected to a power source. To connect the music receiver to a stereo 1 2 Plug one end of the stereo cable into the relevant stereo connectors (Left/ Right) on your music receiver.
Pairing and connecting Before you can use your music receiver to play music through a stereo system, you need to first pair the music receiver with your phone. You can pair the devices manually, or you can use NFC. Once paired, the music receiver automatically establishes a connection to your phone. The internal memory of your music receiver can save and remember up to eight pairings with other phones at any given time.
Disconnecting and reconnecting There are three ways to disconnect your phone from or reconnect it with the music receiver: • • • Deselect or select BM10 in the list of paired Bluetooth® devices in your phone. Place your phone over the music receiver so that the NFC detection area of each device touches the other. Press the Pair/Connect button. 6 This is an internet version of this publication. © Print only for private use.
Smart Connect You can use the Smart Connect application on your phone to automatically stream music to the music receiver when the phone is connected with the receiver. Setting up such an action in the Smart Connect application is known as creating an event. For example, you could create an event that sets the music player to stream music to the music receiver every day at a certain time, for example, while you are taking a tea or coffee break.
Legal information Music ReceiverBM10 This User guide is published by Sony Mobile Communications AB or its local affiliated company, without any warranty. Improvements and changes to this User guide necessitated by typographical errors, inaccuracies of current information, or improvements to programs and/or equipment, may be made by Sony Mobile Communications AB at any time and without notice. Such changes will, however, be incorporated into new editions of this User guide. All rights reserved.
Industry Canada Statement This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
