3-876-649-15 (1) Video Projector Operating Instructions VPL-HW10 © 2008 Sony Corporation
WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. THIS APPARATUS MUST BE EARTHED. This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Disposal of Used Lamp This projector’s lamp contains mercury and should be disposed of properly. Consult your local authorities regarding safe disposal. The material contained in this lamp are similar to those of a fluorescent lamp, so you should dispose of it in the same way. Trademark Information HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. “Blu-ray Disc” is a trademark.
For customers in Canada This Class B digital apparatus complies with Canadian ICES-003. For customers in Europe Disposal of waste batteries (applicable in the European Union and other European countries with separate collection systems) This symbol on the battery or on the packaging indicates that the battery provided with this product shall not be treated as household waste.
Table of Contents Precautions .........................................7 Location of Controls Front/Right Side .................................8 Rear/Bottom .......................................9 Remote Control ................................10 Connections and Preparations Unpacking ........................................11 Step 1: Installing the Projector .........12 Before Setting Up the Projector .....................................12 Positioning the Projector and a screen .......................
Others About the Control for HDMI ........... 54 About the x.v.Color ......................... 54 Troubleshooting ............................... 55 Warning Indicators ..................... 57 Message Lists ............................. 58 Replacing the Lamp and the Air Filter and Cleaning the Ventilation Holes (intake) ............................................. 59 Cleaning the Air Filter ..................... 62 Fitting the Lens Cap ......................... 62 Cleaning and the Screen of the Projector .
Precautions On safety • Check that the operating voltage of your unit is identical with the voltage of your local power supply. • Should any liquid or solid object fall into the cabinet, unplug the unit and have it checked by qualified personnel before operating it further. • Unplug the unit from the wall outlet if it is not to be used for several days. • To disconnect the cord, pull it out by the plug. Never pull the cord itself. • The wall outlet should be near the unit and easily accessible.
Location of Controls Front/Right Side You can use the buttons on the control panel with the same names as those on the remote control to operate the projector.
Location of Controls Rear/Bottom Ventilation holes (intake) (1 page 13) Ventilation holes (intake) (1 page 13) Ventilation holes (intake) (1 page 13) Ventilation holes (intake) (1 page 13) Lamp cover (1 page 60) Adjusters (1 page 25) Filter holder (1 page 61) Ventilation holes (intake) (1 page 13) Projector suspension support attaching hole (1 page 71) 9
Remote Control Infrared transmitter LIGHT button Illuminates the buttons on the remote control.
Connections and Preparations Unpacking Check the carton to make sure it contains the following items: • Remote control (1) and Size AA (R6) batteries (2) • AC power cord (1) • Lens cap (1) When you have purchased the projector, the lens cap is put onto the lens. Remove this lens cap when you use the projector. • Operating Instructions (this manual) Inserting the batteries into the remote control Push and slide to open. Insert the batteries E side first as shown in the illustration.
Step 1: Installing the Projector The projector displays pictures output from a VCR or other device. The lens shift allows you to have broader options for placing the projector and viewing pictures easily. Installing the projector in such a location may cause a malfunction of the unit due to moisture condensation or rise in temperature.
Improper use Do not do any of the following while using the projector. Ventilation holes (intake) Ventilation holes (exhaust) 15° or more Avoid using the projector tilted at an angle of more than 15 degrees. Do not install the projector anywhere other than on a level surface or on the ceiling. Installing the projector in such a location may result in uneven color uniformity or reduce the reliability of the effects of the lamp.
Positioning the Projector and a screen The installation distance between the projector and a screen varies depending on the size of the screen or whether or not you use the lens shift features. 1 Determine the installation position of the projector and screen. You can obtain a good quality picture if you position the projector so that the center of the lens is within the area indicated in gray in the illustration. Use the values L, x and y in the table on page 15 or 16 as a guide.
When using the 16:9 aspect ratio screen size Screen Size SS (inches) 40 60 80 100 120 150 200 250 300 1016 1524 2032 2540 3048 3810 5080 6350 7620 1201 1825 2448 3072 3695 4631 6189 7748 9307 (71 7/8) 2782 (96 1/2) 3723 (121) maximum (47 3/8) 1840 L x (72 1/2) 0 (145 1/2) (182 3/8) (243 3/4) (305 1/8) (366 1/2) 5605 7017 9371 11724 14077 4664 (109 5/8) (146 5/8) (183 5/8) (220 3/4) (276 3/8) 0 0 0 0 0 (369) 0 (461 5/8) (554 1/4) 0 0 (0) (0) (0) (0) (0) (0) (0)
When using the 4:3 aspect ratio screen size Screen Size SS (inches) 40 60 80 100 120 150 200 250 (mm) 1016 1524 2032 2540 3048 3810 5080 6350 7620 minimum 1480 2243 3006 3770 4533 5677 7585 9493 11401 (58 3/8) (88 3/8) 2262 (89 1/8) 3414 4566 5718 6870 8598 (134 1/2) (179 7/8) (225 1/8) (270 1/2) (338 5/8) L maximum x y x y x y 14357 17237 (565 1/4) (678 5/8) 0 0 0 0 0 0 0 0 (0) (0) (0) (0) (0) (0) (0) 396 (15 5/8) 594 (23 1/2) 81 792 (31 1/4) 991 (39 1/
2 Position the projector so that the lens is parallel to the screen. Top view Screen Project an image on the screen and adjust the picture so that it fits the screen. (1 page 22) To project an image, connect video equipment to the projector. (1 page 18) Note When using a screen with an uneven surface, stripes pattern may rarely appear on the screen depending on the distance between the screen and the projector or the zooming magnifications. This is not a malfunction of the projector.
Step 2: Connecting the Projector When making connections, be sure to do the following: • Turn off all equipment before making any connections. • Use the proper cables for each connection. • Insert the cable plugs properly; poor connection at the plugs may cause a malfunction or poor picture quality. When pulling out a cable, be sure to pull it out from the plug, not the cable itself. • Refer to the operating instructions of the connected equipment.
To connect to a DVD player/recorder or Blu-ray Disc player/ recorder equipped with HDMI output Right side of the projector AV amplifier Speakers DVD player/recorder or Bluray Disc player/recorder, etc., with the HDMI output to HDMI output HDMI cable (not supplied) : Video signal flow When using an optional HDMI cable, be sure to use a cable that has acquired the HDMI logo.
To connect to a VCR equipped with the S video connector or video connector You can connect a DVD player/recorder, hard disk video recorder, VCR or laser disk player, which is not equipped with component video connectors.
Connecting to a Computer Right side of the projector Connections and Preparations Computer to monitor output HD-Dsub15 pin cable (not supplied) or HDMI cable (not supplied) : Video signal flow When using an optional HDMI cable, be sure to use a cable that has acquired the HDMI logo. Tip When connecting an HD-Dsub15 pin cable, set “Input-A Signal Sel.” in the Setup menu to “Auto” or “Computer.” If the input signal does not appear properly, set it to “Computer.
Step 3: Adjusting the Picture Position Project an image on the screen and then adjust the picture position. 1 ON/STANDBY indicator 4 INPUT button 5 Lens shift dials Remote control detector 2 6, 7 Zoom lever, Focus ring ?/1 (On/ standby) switch Tip (joystick) buttons on the side The ?/1 (ON/STANDBY), INPUT, MENU, and M/m/
Press the ?/1 (ON/STANDBY) switch to turn on the projector. The ON/STANDBY indicator flashes in green, and then lights in green. When the ON/STANDBY indicator flashes, “Starting...” appears on the screen. 3 Turn on the equipment connected to the projector. Refer to the operating instructions of the connected equipment. 4 Press INPUT to project the picture on the screen. Each time you press the button, the input indication and equipment to be projected change.
To adjust the horizontal position Turn the lens shift dial right or left. The picture projected on the screen moves right or left by a maximum of 25% of the screen width from the center of the lens. 25% 1 screen width 25% Top view : Picture position when moving the picture to the left at maximum : Picture position when moving the picture to the right at maximum To adjust the vertical position Turn the lens shift dial up or down.
Adjust the picture size using the zoom lever. 7 Adjust the focus using the focus ring. Zoom lever Focus ring To adjust the tilt of the installation surface If the projector is installed on an uneven surface, use the adjusters to keep the projector level. Turn to adjust. Adjusters Note Be careful not to catch your finger when turning the adjusters.
Step 4: Selecting the Menu Language You can select one of 16 languages for displaying the menu and other on-screen displays. The factory default setting is English. To change the current menu language, set the desired language with the menu screen. 2,3,4 M/m/
Press M/m to select the Setup menu, and press , or . The setting items of the selected menu appears. 3 Press M/m to select “Language,” and press , or . 4 Press M/m/
Projecting This section describes how to operate the projector to view the picture from the equipment connected to the projector. It also describes how to adjust the quality of the picture to suit your taste. Projecting the Picture on the Screen 1 Power on both the equipment and the device connected to the equipment. 2 Press INPUT repeatedly to select the input you want to project on the screen. Display the indication of the input you want.
Notes on input of HDMI signal The projector adjusts the RGB dynamic range of the equipment connected with HDMI cable to the following to suit the HDMI standard and display in best picture quality. When video signal is input: Limited (16-235) When computer signal is input: Full (0-255) Turning Off the Power 1 Press the ?/1 (ON/STANDBY) switch. A message “POWER OFF?” appears on the screen. 2 Press the ?/1 (ON/STANDBY) switch again before the message disappears.
Selecting the Wide Screen Mode You can enjoy various wide screen modes according to the video signal received. Press WIDE MODE. Each time you press the button, you can select the “Wide Mode” setting. You can also select it using the menu. (1 page 45) WIDE MODE button Original image When the Wide Mode is operated Wide Zoom A 4:3 aspect ratio picture is enlarged naturally to fill the screen. The upper and lower portions of the screen are slightly cut off.
Letterbox picture with side panels Zoom Letterbox picture Full 1 (When a computer signal is input) Displays a picture on the whole of the screen without changing the aspect ratio of the original picture. Full 2 (When a computer signal is input) Displays a picture on the whole of the screen. Note You can adjust the vertical position of the picture with “V Center” and “Vertical Size” in the Screen menu only when “Zoom” is selected.
Selecting the Picture Viewing Mode You can select the picture viewing mode that best suits the type of program or room conditions. Press one of the PICTURE MODE buttons (DYNAMIC, STANDARD, CINEMA and USER 1, USER 2 and USER 3). DYNAMIC Vivid picture quality that enhances the sharpness and contrast of the picture. PICTURE MODE buttons DYNAMIC STANDARD CINEMA USER 1, USER 2 and USER 3 STANDARD Standard picture quality that emphasizes on naturalness. CINEMA Picture quality suited for watching movies.
Adjusting the Picture Quality You can adjust the picture quality that suits your taste by selecting the adjustment items with the remote control. The adjusted data can be stored in each picture mode. 2 M/m/
Adjusting the Picture Using Real Color Processing The Real Color Processing (RCP) feature allows you to adjust the color and hue of each target of the projected picture you specify independently. You can thus obtain a picture more suitable to your taste. Tip Freeze the scene of the video source when you are adjusting the picture using Real Color Processing. 2, 3, 4, 5 M/m/
2 Press M/m to select “Position” or “Range,” and specify it more delicate color position and color range you want to adjust using
Using Other Functions PIC MUTING button APA button FREEZE button Press PIC MUTING. Press to temporarily turn off a projected picture. To return to the previous screen, press PIC MUTING again. Press APA. Press to automatically adjust a picture from a computer to a position where it looks clear. Press FREEZE. Press to pause and display a projected picture. To return to the previous screen, press FREEZE again. Note APA and FREEZE are available only for computer signal.
Using the Menus This section describes how to make various adjustments and settings using the menus. Operation through the Menus RESET button 2, 3, 4 M/m/
1 Press MENU. The menu window appears. 2 Press M/m to select a menu item, and press , or . The items that can be set or adjusted with the selected menu appear. The item presently selected is shown in yellow.
3 Pop-up menu Press M/m to select an item you want to set or adjust and press , or . The setting items are displayed in a pop-up menu, in a setting menu, in an adjustment menu or in the next menu window.
4 Make the setting or adjustment of an item. To reset the items that have been adjusted When changing the adjustment level Select an item in the Menu screen, and display the pop-up menu, the setting menu, and the adjustment menu. Press the RESET on the remote control to reset only the selected settings to its factory preset value. To increase the value, press M/,. To decrease the value, press m/<. Press to restore the original screen. When changing the setting Press M/m to change the setting.
Picture Menu The Picture menu is used for adjusting the picture. Using the Menus Note These items may not be available, depending on the type of input signal. For details, see “Input Signals and Adjustable/Setting Items” (1 page 69). Picture Mode You can select the picture viewing mode that best suits the type of picture or the environment. Dynamic: Vivid picture quality that enhances sharpness and contrast of the picture. Standard: Standard picture quality that emphasizes on naturalness.
Cinema Black Pro Advanced Iris Switches the iris function during projection. Auto 1: Automatically switches to an optimum iris according to a projected scene. The contrast of the scene is emphasized most. Auto 2: An optimum iris becomes smaller than when set to “Auto 1”. The contrast of the scene becomes reduced. Sensitivity: If “Auto 1” or “Auto 2” is selected, either “Recommend”, “Fast”, or “Slow” can be selected according to the desired response speed with Sensitivity Mode.
Expert Setting NR (Noise Reduction) Reduces the roughness or noise of the picture. Usually, select “Off”. If the picture is rough or noisy, select a setting from among “Low”, “Middle” or “High” according to the input signal source. Film Mode According to the film source you have selected, make a setting for playback. Auto: Reproduces a 2-3 or 2-2 Pull-Down format video signal, such as film sources, in a smooth picture movement.
Advanced Picture Menu The Advanced Picture is used for adjusting the picture more. RCP (Real Color Processing) You can adjust the color and hue of each selected portion of the picture independently. User 1, User 2, User 3: You can adjust the picture using Real Color Processing and store the settings. Once the settings are stored, you can view the picture with the adjusted picture quality. Off: Cancels this feature. For details, see “Adjusting the Picture Using Real Color Processing”.
Screen Menu The Screen menu is used to adjust the input signal. You can adjust the size of the picture, and select wide screen mode, etc. . Using the Menus Note These items may not be available, depending on the type of input signal. For details, see “Input Signals and Adjustable/Setting Items” (1 page 69). Wide Mode (Video signal) You can set the aspect ratio of the picture to be displayed for the current input signal.
Over Scan Hides the outline of the picture. On: Hides the outline of the input picture. Select this setting when noise appears along the edge of the picture. Off: Projects the whole of the input picture. Tip To display the displayable region within the four directions of the screen, refer to “Blanking” on the Installation menu (1 page 50). Screen Area Selects the size of the picture when a Hi-Vision picture is overscanned. Full: Expands the picture on the whole of the screen.
Setup Menu The Setup menu is used to change the factory preset settings, etc. Sets whether or not the on-screen display is displayed. Set to “Off” to turn off the on-screen displays except for certain menus, message when turning off the power, and warning messages. Language Selects the language used in the menu and on-screen displays.
Input-A Signal Sel. Selects the type of signal input from the equipment connected to the INPUT A connector. Selects the type of signal input from the equipment by selecting “Input-A” with the INPUT button. Auto: Selects the input signal type automatically. Computer: Inputs the signal from a computer. Video GBR: Inputs the signal from a TV game or HDTV broadcast. Component: Inputs the component signal from a DVD player/ recorder, Blu-ray Disc player/recorder, digital tuner, etc.
Function Menu The Function menu is used for changing the settings of the various functions of the projector. Using the Menus Control for HDMI Selects the function whether to turn the Control for HDMI function effective, when the HDMI 1 INPUT and HDMI 2 INPUT connectors are connected to a Control for HDMI compatible equipment. Control for HDMI: When set to “On”, the Control for HDMI function is turned effective and the following settings can be assigned.
Installation Menu The Installation menu is used for changing the installation settings. V Keystone Corrects the vertical trapezoidal distortion of the picture. When the bottom of the trapezoid is longer than the top ( Sets a lower value (– direction) When the top of the trapezoid is longer than the bottom ( Sets a higher value (+ direction).
Panel Alignment Reset: Returns to the factory settings. Note Depending on the adjustments made above, the number of display pixel may decrease. Also, colors may become uneven or the resolution may change. Tip If colors appear on the edge of the screen after making the adjustments above, adjust the region of the picture to display with “Blanking” in the Installation menu. (1 page 50) 51 Using the Menus This feature allows you to adjust the gaps in the color of characters or the picture.
Information Menu The Information menu displays the model name, serial number, the horizontal and vertical frequencies of the input signal and the cumulated hours of usage of the lamp. Model name: VPL-HW10 Serial No. Memory No. Signal type Model name Displays the model name (VPL-HW10). Serial No. Displays the serial number. fH (horizontal frequency) Displays the horizontal frequency of the input signal. fV (vertical frequency) Displays the vertical frequency of the input signal. Memory No.
About the Preset Memory No. Note When the aspect ratio of input signal does not match the screen size, a part of the screen is displayed in black. 53 Using the Menus This projector has 38 types of preset data for input signals (the preset memory). When the preset signal is input, the projector automatically detects the signal type and recalls the data for the signal from the preset memory to adjust it to an optimum picture.
Others This section describes about the other functions, how to solve the problems, how to replace the lamp and air filter, etc. About the Control for HDMI What is the Control for HDMI? Control for HDMI is an HDMI standard mutual control function which uses the HDMI CEC (Consumer Electronics Control) specification. By connecting a variety of Control for HDMI compatible equipment such as a DVD recorder, an AV amplifier, etc.
Troubleshooting If the projector appears to be operating erratically, try to diagnose and correct the problem using the following instructions. If the problem persists, consult with qualified Sony personnel. Power Symptom The power is not turned on. Cause and Remedy Picture Symptom Cause and Remedy No picture. c Check that the proper connections have been made. (1 page 18) c Select the input source correctly using the INPUT button.
Symptom Cause and Remedy The picture is too dark. c Adjust the “Contrast” or “Brightness” of the Picture properly. (1 page 42) The picture is not clear. c Adjust the focus. (1 page 25) c Condensation has accumulated on the lens. Leave the projector for about 2 hours with the power on. The picture flickers. c For pictures from a computer, activate “APA” and adjust the current input signal. c Adjust “Phase” for “Adjust Signal” in the Screen menu properly.
Warning Indicators The ON/STANDBY or LAMP/COVER indicator lights up or flashes if there is any trouble with your projector. Others LAMP/COVER indicator ON/STANDBY indicator Symptom Cause and Remedy LAMP/COVER flashes in red. (A repetition rate of 2 flashes) c Close the lamp cover securely, then tighten the screws securely. (1 page 60) c Close the filter holder securely. (1 page 61) LAMP/COVER flashes in red. (A repetition rate of 3 flashes) c The lamp has reached the end of its useful lifespan.
Message Lists Warning messages Message Cause and Remedy High temp.! Lamp off in 1 min. c Turn off the power. c Check to ensure that nothing is blocking the ventilation holes. (1 page 13) Frequency is out of range! c Frequency is out of range. Input a signal that is within the acceptable frequency range of the projector. (1 page 66) Please check Input-A Signal Sel. c Set “Input-A Signal Sel.” in the Setup menu to “Computer” when an RGB signal is input from a computer.
Replacing the Lamp and the Air Filter and Cleaning the Ventilation Holes (intake) 1 Turn off the projector and unplug the AC power cord. 2 When setting the projector on a flat surface such as a desk etc., put a cloth to prevent the surface from being scratched. Reverse the projector as illustrated, then place it on the cloth.
3 Loosen the screw on the lamp cover with a Philips screwdriver, and then open the lamp cover. 4 Loosen the 3 screws on the lamp with the Phillips screwdriver. Hold up the handle, then pull the lamp straight out. 5 60 Hold the handle of the new lamp and push it in securely until it reaches the end, and then tighten the 3 screws. Note Be careful not to touch the optical block inside the unit. 6 Close the lamp cover, then tighten the screws.
7 Remove the filter holder. 8 Others Ventilation holes (intake) 12 Place the project back on its Remove the air filter. original position. 13 Turn on the projector, then select the desired setting item on the Setup menu. The menu screen below will be appeared. Claws 9 Attach the new air filter so that it fits into the each claws (10 positions) on the filter holder. 14 Select “Yes”. Note Attach the air filter aligning it with the shape of the filter holder.
• Be sure to turn off the projector and unplug the power cord before replacing the lamp, then check the ON/STANDBY lamp has already been turned off. • The projector will not turn on unless the lamp is securely installed in place. • The projector will not turn on unless the lamp cover are securely closed. • To cancel a message displayed on the screen, press either the button on the remote control or the one on the control panel on the projector. Note The lamp contains mercury.
Cleaning and the Screen of the Projector Others Cleaning the lens The lens surface is especially treated to reduce reflection of light. As incorrect maintenance may impair the performance of the projector, take care with respect to the following: • Wipe the lens gently with a soft cloth such as a cleaning cloth or glass cleaning cloth. • Stubborn stains may be removed with a soft cloth such as a cleaning cloth or glass cleaning cloth lightly dampened with water.
Specifications System Projection system SXRD panel, 1 lens, projection system LCD panel 0.61-inch (15.4 mm) SXRD panel 6,220,800 pixels (2,073,600 pixels × 3) Lens 1.6 times zoom lens (manual) f=18.5 mm to 29.6 mm F2.50 to F3.40 Lamp 200 W Ultra High Pressure Lamp Projection picture size 40 inches to 300 inches (1,016 mm to 7,620 mm) (measured diagonally) Color system NTSC3.58/PAL/SECAM/ NTSC4.
Supplied accessories Remote control RM-PJAW15 (1) Size AA (R6) batteries (2) AC power cord (1) Lens cap (1) Operating Instructions (1) Design and specifications are subject to change without notice.
Warning on power connection Use a proper power cord for your local power supply.
Memory No. Preset signal (resolution) fH (kHz) fV (Hz) Sync H Size 1080/24PsF (48i) 1080/24PsF (48i) (1920 × 1080i) 27.000 48.000 SonG/Y – 10 720/60p 720/60p (1280 × 720p) 45.000 60.000 SonG/Y – 11 720/50p 720/50p (1280 × 720p) 37.500 50.000 SonG/Y – 12 1080/60p 1080/60p (1920 × 1080p) 67.500 60.000 – – 13 1080/50p 1080/50p (1920 × 1080p) 56.260 50.000 – – 14 1080/24p 1080/24p (1920 × 1080p) 26.973 23.976 – – 21 640 × 350 VGA-1 (VGA350) 31.469 70.
Memory No. Preset signal (resolution) 47 1280 × 1024 VESA 60 fH (kHz) fV (Hz) 63.974 60.013 Sync H-pos, V-pos H Size 1696 50 1400 × 1050 SXGA + 65.317 59.978 H-neg, V-pos 1864 55 1280 × 768 1280 × 768/60 47.776 59.870 H-neg, V-pos 1664 56 1280 × 720 1280 × 720/60 44.772 59.
Input Signals and Adjustable/Setting Items The items in the menus available to adjust differ depending on the input signal. The following tables indicate them. The items that cannot be adjusted are not displayed in the menu. Picture Menu Item Input signal Component signal Video GBR signal Computer signal Advanced Iris z z z z Lamp Control z z z z Contrast z z z z Brightness z z z z z z z – z (NTSC3.58/ NTSC4.43 only, except for B & W) z z – Color Temp.
Screen menu Item Input signal Video signal Component signal Video GBR signal Wide Mode z z z Over Scan – z Screen Area *2 – V Center *4 z z z z Vertical Size *4 z z z – APA – – – z *5 Phase – – – z *5 Pitch – – – z *5 Shift – z *5 z *5 z z (preset memory numbers 7, 8, 9, 12, 13, 14 only) z z (preset memory numbers 7, 8, 9, 12, 13, 14 only) Computer signal z *3 – – z : Adjustable/can be set – : Not adjustable/cannot be set *1: The setting can be made only when “x
Ceiling Installation Use the PSS-H10 Projector Suspension Support when you install the projector on a ceiling. The projection distances for ceiling installation are shown below.
When using the 16:9 aspect ratio screen size Screen Size SS (inches) (mm) (minimum) L’ (maximum) (minimum) y’ (maximum) 40 60 80 100 120 150 200 250 300 1016 1524 2032 2540 3048 3810 5080 6350 7620 1385 2008 2632 3256 3879 4814 6373 7932 9491 (54 17/32) (79 1/16) (103 5/8) (128 5/32) (152 23/32) (189 17/32) (250 29/32) (312 9/32) (373 21/32) 2013 2955 3896 4837 5779 7190 9544 11897 14250 (79 9/32) (116 5/16) (190 7/16) (227 1/2) (283 3/32) 4) (468 3/8)
Attaching the PSS-H10 projector suspension support For details on installation on a ceiling, refer to the Installation manual for Dealers of the PSS-H10. Make sure to consult with a qualified Sony personnel for installation. The installation measurements are shown below when installing the projector on a ceiling using the PSS-H10. Top view Install the projector so that the center of the lens is parallel to the center of the screen. 182.
Front view 150 (6) 75 (3) Ceiling 175 (7) Center of the supporting pole The bottom surface of the mount bracket 93.5 (3 3/4) Center of the lens 203.7 (8 1/8) 203.7 (8 1/8) 407.4 (16 1/8) Side view 182.8 (7 1/4) 130 (5 1/8) Center of the lens Front of the cabinet 227.8 (9) 236.1 (9 3/8) 463.
Index A HDMI ...................................................... 19 Hue .......................................................... 42 I Image Flip ............................................... 50 Input-A Signal Sel. ................................. 48 L Lamp Control .......................................... 42 Lamp Timer ............................................ 52 Language ................................................. 47 Location of Controls Front/Right side ...............................
Preset Memory ........................................ 53 Preset Signals .......................................... 66 R RCP ......................................................... 44 Remote control inserting the batteries .......................... 11 location of controls .............................. 10 Reset resettable items .................................... 40 resetting the items ............................... 40 S Screen Area .............................................
Printed on 70% or more recycled paper.
