User's Manual

18
7 Aligning the a hole in the front of the ceiling
bracket (A) to the ◊ hole of the ceiling
bracket (B), push in the camera unit, and
turn the camera with the ceiling bracket (A)
clockwise to temporarily secure the
camera.
8 Secure the ceiling brackets (A) and (B)
using supplied three screws (3 M3×8).
9-1 Connect the cables to the terminals at the
back of the camera.
• Make sure no load is applied to the connectors of
the cables.
• For measures that prevent the cord of the AC
adapter (not supplied) from being pulled out, see
“Connecting the Camera” (page 23).
• For measures that prevent the HDMI cable from
being pulled out, proceed to “9-2” after
connecting the HDMI cable. Then, connect all
the other cables.
1
2
Ceiling bracket
(B)
Ceiling
Align
Ceiling
bracket (A)
a mark
◊ mark
Notes
Ceiling
3 M3×8
(supplied)
Ceiling