User's Manual

25
Devices equipped with an SDI input terminal
(HD output): BRC-X1000
Devices equipped with an SDI input terminal
(HD output): BRC-H800
Connecting a single camera to a
single remote controller (not
supplied)
Using VISCA Over IP (LAN terminal)
When you connect multiple cameras to a single remote
controller or when you connect multiple cameras to
multiple remote controllers with a PC, use a switching
hub for the connection. When you directly connect
them, use a cross network cable.
For details, see the operating instructions of the remote
controller.
Connecting a single camera to a
single remote controller (not
supplied)
Using the VISCA RS-422 terminal
A remote controller can be connected via the VISCA
RS-422 terminal. The VISCA RS-422 allows
connections of up to 1.2 km in length.
Using supplied RS-422 terminal board connectors and
the remote controller, make a connecting cable.
When you make the connecting cable, refer to the pin
layout of the VISCA RS-422 terminal (page 63) and the
VISCA RS-422 connection diagram (page 63).
Check the setting of each switch of the remote
controller. For details, refer to the operating instructions
of the remote controller.
EXT SYNC IN
TERMI-
NATION
ON OFF
ON
ON
OFF
LINE OUT
SDI 1
OSD
LAN
SDI 2
23456781
MONITOR OUTHDMI OUT
SDI 1 SDI 2
IN
SYSTEM
SELECT
IR SELECT
CAMERA SETUP
123
VISCA RS - 422 OUT
12V
Recorder or monitor equipped with SDI input terminal
Connecting cable with BNC
connector
To SDI input terminal
SDI OUT
*
Equivalent signals are delivered to both SDI 1 and SDI 2.
EXT SYNC IN
TERMI-
NATION
ON OFF
ON
ON
OFF
OSD
LAN
23456781
HDMI OUT
IN
SYSTEM
SELECT
IR SELECT
CAMERA SETUP
123
VISCA RS - 422 OUT
12V
MONITOR
OUT
LINE OUT
Connecting cable with BNC
connector
To SDI input terminal
SDI OUT
Recorder or monitor equipped with SDI input terminal
MODE
VISCA
1919
RS- 4 2 2 TA LLY / C O NTA C T RS-232C
!
DC 12V
LAN
EXT SYNC IN
TERMI-
NATION
ON OFF
ON
ON
OFF
LINE OUT
SDI 1
OSD
LAN
SDI 2
2 3 456781
MONITOR OUTHDMI OUT
SDI 1 SDI 2
IN
SYSTEM
SELECT
IR SELECT
CAMERA SETUP
123
VISCA RS - 422 OUT
12V
Network cable
(commercially available)
To LAN terminal