User's Manual

28
Externally synchronizing a single
camera
External synchronization
Multiple cameras can be synchronized to a specific
reference signal.
Providing a reference signal to the EXT SYNC IN
terminal (page 9) allows the camera to be synchronized
in phase with the video signal. Depending on the system
frequency, the compatible reference signal varies.
• When the reference signal is unstable, the camera
cannot be externally synchronized.
• Sub-carriers cannot be synchronized.
System select Compatible reference signals
0: 3840×2160/29.97p
1: 1920×1080/59.94p
2: 1920×1080/59.94i
1920×1080/59.94i
720×486/59.94i (NTSC)
4,7: 1280×720/59.94p 1920×1080/59.94i
1280×720/59.94p
720×486/59.94i (NTSC)
8: 3840×2160/25p
9: 1920×1080/50p
A:1920×1080/50i
1920×1080/50i
720×576/50i (PAL)
C:1280×720/50p 1920×1080/50i
1280×720/50p
720×576/50i (PAL)
E: 3840×2160/23.98p
F: 1920×1080/23.98p
1920×1080/47.95i (23.98PsF)
Notes
EXT SYNC IN
TERMI-
NATION
ON OFF
ON
ON
OFF
LINE OUT
SDI 1
OSD
LAN
SDI 2
2 3 456781
MONITOR OUTHDMI OUT
SDI 1 SDI 2
IN
SYSTEM
SELECT
IR SELECT
CAMERA SETUP
123
VISCA RS - 422 OUT
12V
Connecting cable with
BNC connector
(commercially available)
To SYNC OUT terminal
Synchronizing signal generator
TERMINATION
switch: On