User's Manual

59
1)
IMG FLIP and PAN TILT SLOW is enabled in the current setting
irrespective of the preset settings.
z Can be stored. During power-up, the camera boots-up with the
settings stored in this preset number.
a Can be stored. After power-up, the stored setting value is applied by
recalling the relevant preset number.
f Can be stored. During power-up, the camera boots-up with the
settings stored in this preset number. The setting value is not
initialized by a reset. The settings do not change even if the preset is
recalled after the corresponding setting values have been changed.
× Cannot be stored.
IR RECEIVE
f
×
TALLY MODE
f
×
TELE CONVERT MODE
f
×
PRESET MODE ×
VERSION ×
IPv4 ADDRESS ×
SUBNET MASK ×
GATEWAY ×
NAME ×
PROFILE ×
OPERATION ×
Items that can be stored Preset position
number
1 2 to 100