User's Manual

43
PAN TILT/PRESET RECALL
Menu
The PAN TILT/PRESET RECALL menu is used to
select the pan/tilt/preset recall mode.
You can set the menu from the Administrator
menu on a web browser.
For details, see “PTZF control tab” (page 88).
PAN TILT
PAN LIMIT (Pan-Tilt - Pan limit)
Set whether to limit the pan rotation range.
[OFF]: Do not apply range limit.
[ON]: Apply range limit.
LEFT (Pan-Tilt - Left)
–170 degrees to +169 degrees, adjustable in 1
degree increment.
RIGHT (Pan-Tilt - Right)
–169 degrees to +170 degrees, adjustable in 1
degree increment.
TILT LIMIT (Pan-Tilt - Tilt limit)
Set whether to limit the tilt rotation range.
[OFF]: Do not apply range limit.
[ON]: Apply range limit.
DOWN (Pan-Tilt - Down)
–20 degrees to +89 degrees when [IMG FLIP] is
set to [OFF], and –90 degrees to +19 degrees
when [IMG FLIP] is set to [ON], adjustable in 1
degree increment.
UP (Pan-Tilt - Up)
–19 degrees to +90 degrees when [IMG FLIP] is
set to [OFF], and –89 degrees to +20 degrees
when [IMG FLIP] is set to [ON], adjustable in 1
degree increment.
Setting range of LEFT/RIGHT
Setting range of DOWN/UP
Notes
• Configure [PAN LIMIT] and [TILT LIMIT] before
storing the camera position in a preset
memory. If the camera position is out of the
range of the [PAN LIMIT] and [TILT LIMIT]
settings, you cannot store the camera position
in the preset memory.
• When you change the [IMG FLIP] setting in the
SYSTEM menu, the [PAN LIMIT] and [TILT LIMIT]
settings are reset to the factory settings.
RAMP CURVE (Pan-Tilt - Ramp curve)
Acceleration/deceleration curve for pan and tilt.
Note
This is fixed to [MODE1] for this camera.
–170° +170°
CENTER (±0°)
–20°
+90°
±0°