Help Guide (Web manual)

Basics
Charging
Before using your Smart Bluetooth® SpeakerBSP60 for the first time, you need to
charge it for approximately 2 hours. Sony chargers are recommended.
The battery status is indicated on the display as when your Smart Bluetooth®
Speaker device is turned on.
To charge your device
1 Slide the power switch to the o position.
2 Plug one end of the USB cable into the charger.
3 Plug the other end of the cable into the Micro USB port of your device.
Turning on and o
To turn on your device
• Slide the power switch to the on position.
To turn o your device
• Slide the power switch to the o position.
When the battery runs out, the device turns o automatically. If this happens, you must
slide the power switch to the o position before your device can start charging.
Resetting the device
You can reset your device to restart it in situations where it behaves unexpectedly.
No settings or pairing information get deleted when you perform such a reset.
You can also reset your Smart Bluetooth® Speaker to its original factory settings. All
settings get deleted when you perform this kind of reset, which is sometimes
necessary if you want to reset the clock or alarm or delete pairing information in
the Smart Bluetooth® Speaker application.
To reset the device
• Using the tip of an unfolded paper clip (or a similar object with a long fine
tip), press the reset button and then release it.
To perform a factory data reset
• Slide the power switch to the PAIRING position for 12 seconds and then
release it.
4
This is an Internet version of this publication. © Print only for private use.