Operating Instructions


  
! Download the CAV-M1000ES Setup Software
installer from the web.
" Run the installation program by double clicking
on the executable file, CAV-M1000ES
Setup.exe.
# After the program finishes installing, you can
launch the software by double-clicking on the
CAV-M1000ES Setup desktop icon or by
choosing Start/Programs/CAV-M1000ES Setup.
NOTE: The CAV-M1000ES application is
approximately 4MB because most supporting DLL
files are compiled into the executable file.
 # 
Configuring the CAV-M1000ES for the first time
using the CAV-M1000ES Setup Application is quick
and simple. There are seven steps:
Step 1: Read Setup Data from the M1000ES
Step 2: Configure Sources
Step 3: Build Second Page Macros (Optional)
Step 4: Configure RS232 Devices (Optional)
Step 5: Configure 12 Volt Triggers (Optional)
Step 6: Configure the Main Remote RF ID
Step 7: Write Setup Data into the M1000ES
NOTE
:
An
RS232 null modem cable is
required to connect the CAV-M1000ES to
your PC. The cable is not included with the
unit and must be obtained separately.