Operating Instructions

+
Now that the CAV-M1000ES settings have been
loaded into the Setup Application and saved, you
can start making any necessary changes. Two types
of sources can be used with the CAV-M1000ES.
"Input Source" refers to equipment such as DVD
players that feed signals into the CAV-M1000ES.
"Common Source" refers to equipment such as
projectors that do not feed the CAV-M1000ES but
can be operated by the RM-TP100 RF remote
control.
Start by configuring the "Input Sources."
! From the main screen, click on the Input
Source Selection tab on the top.
" Select the Source 1 sub-tab.
# Configure the Source 1 device by specifying:
• Alias Input Name: Enter the source name
that will be displayed on the in-wall
keypads for selecting the Source 1 device.
Alias input names can be up to seven
characters long. These names will appear
in the LCDs of the RMR-K100 keypads.
• Product: Select the type of device.
• Manufacturer: Select the maker.
• Main STR Function: A Sony ES Series
receiver is connected to the CAV-M1000ES
via RS232. This drop down enables you to
configure the input source that the receiver
will automatically select when Source 1 is
selected on the RM-TP100 remote.
• Load IR From File: Input Source infrared
(IR) remote commands that are not
preprogrammed can be "learned" by the
CAV-M1000ES using the handheld IR
remote control of the input source
equipment and the front panel of the
M1000ES. These commands form separate
Source IR files that use the file extension
"MSE." Once learned, these MSE files can
be saved as a separate PC file for use with
other CAV-M1000ES main units. Sony will
also post MSE files on our CAV-M1000ES
support website for easy downloading and
exchange.
a. To load input source infrared remote
commands from a saved PC file, click
the Load IR From File button.
b. To save the current IR commands to a
PC file, click the Save IR To File button
and supply a name for the file you wish
to save.
c. To clear input source infrared
commands from the current
configuration, click the Clear IR File
button.
$ Repeat the above steps for every input source
that needs to be configured by going through
the remaining Source tabs. You can configure
up to 8 unique input sources.
Next, configure the "Common Sources" by
following similar steps.
! Click on the Common Source Selection tab on
the top.
" Select the Common 1 sub-tab.
# Configure the Common 1 device by specifying:
• Product: Select the type of device.
• Manufacturer: Select the maker.
• Load IR From File: Common Source
infrared (IR) remote commands that are not
preprogrammed can be "learned" by the
CAV-M1000ES using the handheld IR
remote control of the common source
equipment and the front panel of the


(# 
