4-735-433-11(1) Camera Control Box Instruction Manual CCB-WD1
English WARNING To reduce fire or shock hazard, do not expose the unit to rain or moisture. IMPORTANT SAFETY INSTRUCTIONS -SAVE THESE INSTRUCTIONS DANGER TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS If the shape of the plug does not fit the power outlet, use an attachment plug adaptor of the proper configuration for the power outlet. Use a nearby wall outlet (wall socket) when using the AC Adaptor/Battery Charger.
For Customers in the U.S.A. For question regarding your product or for the Sony Service Center nearest you, call 1-800-222SONY (7669). Declaration of Conformity Trade Name: SONY Model No.: CCB-WD1 Responsible Party: S ony Electronics Inc. Address: 16535 Via Esprillo, San Diego, CA 92127 U.S.A. Telephone Number: 858-942-2230 This device complies with part 15 of the FCC rules.
Notes to avoid access by unintended third parties Depending on the environment of use, unintended third parties may access your network. Only connect this product to networked devices managed by you. Connection to other networked devices is performed at your own risk. This product may be accessed without authorization and the contents of communications may be intercepted.
Identifying parts Tripod socket hole Use a tripod with a screw less than 5.5 mm (7/32 inches) long. Otherwise, you cannot firmly secure the product, and damage to the product may occur. Power lamp LAN terminal Use this terminal to connect the product to a computer or a switching hub. ON/OFF (Power) switch This switch turns the power on or off. MASTER/CLIENT (Master/ Client) switch Set this switch to “MASTER” for one of the camera control boxes, and to “CLIENT” for the others.
Connecting to a camera and a computer Connect this product to a camera and a computer to operate the camera from the computer. You can operate multiple cameras at once from a single computer by connecting them as illustrated below. Set the MASTER/CLIENT switch on one of the products (camera control boxes) to “MASTER.” Then, set the MASTER/CLIENT switches on the others to “CLIENT.” Conceptual diagram DSC-RX0 Camera control box Switching hub Computer Note ••You can connect one camera to this product.
Cable protector Use the cable protector to prevent the cables from being disconnected. Run all the cables through the cable protector, and then connect the cables to the product. Attach the cable protector Attachment screws to the product so that it aligns with the shape of the connector compartment, and then secure the cable protector by tightening the two attachment screws. Secure the cables with the fixing dial.
Connecting the product to a camera Connect the product to the camera using the multi terminal connecting cable (supplied). • On the camera, set MENU (Setup) [USB Connection] to [PC Remote] before you connect it. (Setup) [PC Remote Settings] • On the camera, set MENU [Still Img. Save Dest.] to [PC+Camera]. • Insert a memory card into the camera. • If you will be using the camera for a long period of time, it is (Setup) recommended that you set MENU [Auto Pwr OFF Temp.] to [High] on the camera.
Setting the MASTER/CLIENT (Master/Client) switch Set the MASTER/CLIENT switch to “MASTER” if you will be using one camera. To use multiple cameras at once, set the switch on one of the camera control boxes to “MASTER.” Then, set the switches on the others to “CLIENT.” MASTER/CLIENT switch When you change the setting Set the ON/OFF (Power) switch to “OFF” to turn off the product before changing the setting of the MASTER/CLIENT switch.
Connecting the product to a computer or switching hub Connect the product to a computer or switching hub using a commercially available LAN cable. 1 Connect the LAN terminal on the product with the LAN port on the computer or switching hub using a LAN cable. •• You cannot connect the computer or switching hub to the micro USB connector or multi terminal on the product.
Turning the power on Connect the product to a power source using the AC Adaptor (supplied). 1 Connect the micro USB connector on the product with the USB connector on the AC Adaptor (supplied) using the micro USB cable (supplied), and then connect the AC Adaptor to a wall outlet (wall socket). •• Do not connect the AC Adaptor to the multi terminal on the product. ON/OFF (Power) switch To the AC Adaptor 2 Make sure that the MASTER/CLIENT (Master/Client) switch on the product is set properly (page 9).
Operating the camera from the computer You can operate the camera from a web browser on the computer by connecting the product to the camera and the computer. Recommended computer environment OS: Windows 7/Windows 8.1/Windows 10 Mac OS X 10.11/macOS 10.12 - 10.13 Web browser: Google Chrome/Internet Explorer/Safari 1 Launch a web browser on the computer, and then enter the following URL into the address bar. URL: http://169.254.200.200/ •• The URL can also be found on the bottom of the product.
Troubleshooting The power does not turn on. • Make sure that the AC Adaptor is a genuine Sony AC-UUD12/AC-UUE12. The power turns off suddenly. • Make sure that the AC Adaptor is a genuine Sony AC-UUD12/AC-UUE12. The connected camera does not appear on the web browser. The camera turns off. • On the camera, set (Setup) MENU [Auto Pwr OFF Temp.] to [High]. This may extend the recording time. The power lamp blinks. • Check whether the MASTER/CLIENT switch is set properly (page 9).
Precautions Do not use/store the product in the following places ••In an extremely hot, cold or humid place In places such as in a car parked in the sun, the product body may become deformed and this may cause a malfunction. ••Storing under direct sunlight or near a heater The product body may become discolored or deformed, and this may cause a malfunction.
Specifications Camera Control Box [Input/Output connectors] Micro USB connector LAN terminal: 10BASE-T/ 100BASE-TX/1000BASE-T (RJ-45) Multi terminal: USB communication: Hi-Speed USB (USB 2.0) USB power supply/USB charging: up to 500 mA [General] Power consumption: Approx. 5.1 W Operating temperature: 0 to 40 °C (32 to 104 °F) Storage temperature: –20 to 55 °C (–4 to 131 °F) Dimensions (W/H/D) (Approx.): 59.0 × 40.5 × 29.8 mm 2 3/8 × 1 5/8 × 1 3/16 in. Mass (Approx.): 90 g (3.
©2018 Sony Corporation Printed in China
