Primary User Manual

20
Superimposing the date and time on pictures
You can record the date or time displayed in the viewfinder superimposed on the
picture.
Carry out the following operations in the standby or recording mode.
Press DATE to record the date.
Press TIME to record the time.
Press DATE (or TIME), then press TIME (or DATE) to record the date and time.
Press DATE and/or TIME again. The date and/or time indicator disappears.
The default clock setting is set to East Coast Standard Time. You can reset the clock in
the menu settings (p. 39).
Note
The date and time indicators recorded manually cannot be deleted.
If you do not record the date and time in the picture
Record the date and time in the black screen as the background for about 10 seconds,
then erase the date and time indicators before starting actual recording.
Recording a picture
DATE
TIME